NZXT Kraken M22 Installation Guide

Component List

The following components are included with the NZXT Kraken M22:

• A. Kraken M22
• B. Intel Retention Bracket (Pre-installed)
• C. AMD Retention Bracket
• D. Backplate
• E. Standoff Screw
• F. Intel Socket 2011/2066 Standoff Screw
• G. M2-Screw
• H. Spacer
• I. Thumbnut with Spring
• J. Plastic Washer
• K. 30mm UNC 6-32 Fan Screw
• L. 5mm UNC 6-32 Screw
• M. Metal Washer
• N. Aer P 120 Fan
• O. Mini-USB Cable

Installation Steps

Step 1: Preparing the Backplate

This universal backplate is compatible with three different kinds of sockets. Please check the correct mounting holes for your socket before moving to the next step.

Remove the stock AMD mounting bracket and backplate.

Install the standoff screws in the relevant holes and fasten the standoff screws by using M2 screws. There is sunk space at one side of backplate can store the fastened M2 screw. Ensure you install the standoff screw and M2 screw on the correct side of the backplate.

Step 2: Installing the Standoffs

Install the spacers onto the standoff screws.

From the front of the motherboard, install the four Socket 2011 standoffs screws.

Step 3: Installing the Backplate

Install the backplate on the rear of the motherboard as oriented in the picture. For Intel socket, please ensure the backplate is installed correctly: it should fully cover the socket's backplate.

Step 4: Changing the Retention Bracket

Slightly push two feet at open end of Intel retention bracket toward outside.

Pull out the Intel retention bracket from the water block.

Follow the pictured orientation to slide the AMD retention bracket onto water block.

Push the retention bracket until the retention bracket secured well.

Step 5: Installing the Water Block

Place the water block with the retention bracket onto the CPU. Ensuring the standoff screws go through the holes of the retention bracket.

Securely apply the plastic washers and thumbnuts with spring onto the standoff screws.

Mounting the Radiator and Fans

Depending on your radiator mounting setup, please use the appropriate screws to mount the radiators:

• Direct Mounting: For mounting in which the radiator fits directly onto the case, please install the fan(s) first using the 30mm fan screws. Use the 5mm case screws and washers to mount the radiator.
• Indirect Mounting: For mounting in which the fan(s) fit between the radiator and chassis, please use the 30mm fan screws and washers for mounting.

Note: Always use washers to prevent damage.

Powering the Pump and Fan

Connect the 3-pin pump power cable of the pump embedded in the radiator to the 4-pin CPU_OPT, PUMP or AIO_PUMP connectors on the motherboard. We suggest to set it to full speed in the BIOS.

Connect the 4-pin power cable of the fan to the 4-pin CPU_FAN connector on the motherboard.

Connecting USB Cable

Connect the Mini-USB cable from the pump to an available USB 2.0 internal connector on the motherboard.

Downloading NZXT CAM

After setting up the Kraken, turn on your PC and proceed to download and install CAM software to enable Kraken controls: camwebapp.com

Warranty Information

I. Warranty Length: NZXT computer cases, temperature meters, fans, accessories, and cables carry a 2 year warranty from the date of purchase for parts and labor. Any replacement product will be warranted for the remainder of the warranty period or thirty days, whichever is longer. Proof of purchase is required for warranty service.

II. Who Is Protected: The Warranty covers only NZXT products purchased by the original consumer from authorized NZXT retailers.

III. What Is Covered: NZXT will at its discretion repair or replace the product that is equal or greater in value depending on supply. The warranty does not cover any NZXT product that was damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications.

Our warranty does not cover the following: Any product or serial number/warranty sticker modification applied without permission from NZXT. Any damage that is not a manufacturing defect. Damage, deterioration or malfunction resulting from accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification or failure to follow instructions included with the product. Repair or attempted repair by anyone not authorized by NZXT. Shipping or transport damage (claims must be made with the carrier) Normal wear and tear.

IV. Exclusion Of Damages (Disclaimer): NZXT shall not, in any event, be liable for any incidental or consequential damage, including but not limited to damages resulting from interruption of service and loss of data, business, or for liability in tort relating to this product or resulting from its use or possession.

V. Limitations Of Implied Warranties: There are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty length specified in Paragraph I.

VI. Local Law And Your Warranty: This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary.

VII. To Obtain Technical Support: If you have already referenced your product owner's manual and still need help, please visit support.nzxt.com for details and contact information.

VIII. For Warranty Service: Proof of purchase (store receipt or invoice) is required for warranty service. For North American Customers: Within the first 60 days after purchase, please return your product to your dealer or reseller for a replacement. If the product is still within warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (support.nzxt.com) for assistance and instructions. NZXT will not accept returns without prior approval and an RMA number.

For more building tips and information, visit: blog.nzxt.com

For more information about NZXT, please visit us online. NZXT Website: nzxt.com