Smart Watch

Getting Started

What's in the box

• Smart watch (ID205L with bands)
• Charging cable
• User manual

What's in this document

This manual provides quick setup guidance for your watch. Setup ensures data synchronization with the VeryFitPro app, allowing access to detailed stats, historical trends, sleep logs, and more. Once setup is complete, you can begin using the watch. The remainder of the manual details every function of the ID205L.

Setting up Your Watch

Charging your watch

Please fully charge your watch before initial use.

1. Insert the USB plug of the charging cable into the USB port on your computer or a UL-certified USB wall charger.
2. Hold the other end of the charging cable near the port on the back of the watch until it attaches magnetically.
3. Ensure the pins on the charging cable lock securely with the port. The connection is confirmed when the watch vibrates and the battery icon with percentage appears on the screen.

When the watch indicates low battery, connect it to a USB port with 5V-500mA. While charging, a battery progress bar is displayed on the screen, and the function button can be pressed to check the battery level. Remove the watch from the power supply once fully charged.

USB charger requirement: DC USB port (5V-500mA)

Charging time: 2-3 hours

Disassembling / Assembling Your Watch

Disassembly

1. To remove the wristbands, turn the watch over and locate the quick-release lever.
2. While pressing the quick-release lever inward, gently pull the wristband away from the watch to release it.

Diagram showing the underside of the watch with a finger pressing the quick-release lever to detach a wristband.

Assembly

1. To reattach the wristbands, slide the pin (opposite the quick-release lever) into the notch on the watch. Align the wristband with the clasp at the top of the watch.
2. While pressing the quick-release lever inward, slide the other end of the wristband into place.
3. When both ends of the pin are inserted, release the quick-release lever.

Diagram illustrating the process of aligning the wristband pin with the watch notch and pressing the quick-release lever.

Diagram showing the second step of assembly, sliding the wristband into place while the lever is pressed.

Wearing Your Watch

All-day wear and exercise

For all-day wear when not exercising, wear the device horizontally on your wrist, about a finger's width below your wrist bone, lying flat, similar to how you would wear a traditional watch.

Tips for optimized heart rate tracking

1. Experiment with wearing the watch higher on your wrist during exercise. Increased blood flow higher on the arm can improve the heart rate signal. Many exercises, like cycling or weightlifting, involve frequent wrist bending, which can interfere with the heart rate signal if the watch is worn too low.
2. Avoid wearing the watch too tightly, as a tight band can restrict blood flow and affect the heart rate signal. For exercise, the watch should be snug but not constricting, slightly tighter than for all-day wear.

Diagram illustrating the correct placement of the watch on the wrist for all-day wear, below the wrist bone.

Diagram showing the watch positioned higher on the wrist during exercise, with arrows indicating improved blood flow and signal.

Using Your Watch

App Installation

Use the watch with the customized VeryFitPro app. Download the VeryFitPro app from the Apple Store or Google Play. Scan the QR codes below to download.

QR code for iOS download

QR code for Android download

App compatibility: The VeryFitPro app is compatible only with smartphones, not tablets or PCs.

Smart Phone System Requirements

• iOS 8.0 & higher
• Android 4.4 & higher
• Bluetooth 4.0 & higher

App Interfaces

Mainpage

The Mainpage displays daily activity data. Swipe down the page to sync data from the watch to your phone.

Screenshot of the app's Mainpage showing activity summary (e.g., steps, distance, calories) and a "Today" view.

Details

The Details section provides a weekly overview of activities, sleep, and heart rate data.

Screenshot of the app's Details view, showing a weekly trend graph for activities, sleep, and heart rate.

Device

The Device section allows management of watch settings and features, such as Call Alerts, Sedentary Alerts, Alarm Alerts, Music Control, and Heart Rate Detection.

Screenshot of the app's Device settings page, listing various alert and control options.

User

The User section manages personal information, target settings, and third-party program connections.

Screenshot of the app's User profile page, showing options for Target Setting, Personal Info, and Third-party program.

Pairing the Watch with Your Phone

Important: Please pair the watch with your phone using the VeryFitPro app, NOT through your phone's Bluetooth settings.

Correct Pairing: Pair the watch with your smartphone in the VeryFitPro app.

Incorrect Pairing: Do NOT pair the watch with your smartphone in your phone's Bluetooth settings.

Visual representation of correct pairing via app (checkmark icon) and incorrect pairing via phone Bluetooth settings (cross icon), with a diagram of a phone and Bluetooth symbol.

1. Enable Bluetooth on your smartphone.
2. Open the VeryFitPro app on your smartphone and navigate to the "Device" page. Tap "Bind Device," and your smartphone will begin searching for devices.
3. From the list of found devices, tap "ID205L" to connect the watch. If ID205L is not found, search again on your smartphone.

Screenshot 1: Smartphone Bluetooth settings showing "ID205L" as a discoverable device (this is the incorrect method).

Screenshot 2: VeryFitPro app's "Device" page with the "Bind Device" option highlighted.

Screenshot 3: VeryFitPro app showing a list of devices to select, with "ID205L" being the target.

Notes:

• Once connected, the watch will automatically search for and reconnect to the app if the connection is lost or Bluetooth is restarted after manual disconnection.
• If the watch is unbound from the app, watch information will reset, and app data will be cleared. Do not unbind unless a reset is necessary.
• The watch can only pair with one smartphone at a time. Ensure the watch and smartphone are within 0.5 meters during pairing.

Getting to Know Your Watch

Function Button

The watch features a function button:

• Press the function button to wake the screen or return to the previous interface.
• Press and hold the function button to turn on the watch.

Image of the Smart Watch ID205L, highlighting the function button and showing the watch face displaying time and battery status.

Watch Interfaces

The watch has a touch screen. Swipe the screen to navigate between different interfaces and tap to enter a function.