Shark HP070 Series Air Purifier User Manual

This document provides instructions for the Shark HP070 Series Air Purifier.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury:

GENERAL WARNINGS

Do not operate the unit with a damaged cord or plug. Contact your local waste authority for information on recycling and disposal options.
Do not run the cord under carpeting, rugs, or similar coverings. Do not route the cord under furniture or appliances. Keep the cord away from high-traffic areas where it can be tripped over.
If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to prevent a hazard.
This appliance should only be placed on a flat, dry surface.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are supervised or have been given instructions concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
Cleaning and user maintenance should not be performed by children without supervision.
Unplug the appliance before cleaning or performing any user maintenance.
Do not touch the plug or appliance with wet hands.
Do not operate without filters in place.
Use only Shark® branded filters and accessories.
Do not damage the power cord: a) Do not pull or carry the appliance by the cord or use the cord as a handle, b) Do not unplug by pulling on the cord. Grip the plug, not the cord, c) Do not place the appliance on the power cord, close a door on the cord, pinch the cord around sharp corners, or leave the cord near heated surfaces.
Do not use if any openings are blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
Do not use if airflow is restricted. If air passages become blocked, turn off the appliance and unplug it. Remove all obstructions before plugging in and turning the unit on again.
Do not use if the appliance is not functioning as it should, has been dropped, damaged, left outdoors, or dropped into water.
Do not place the appliance on unstable surfaces like chairs or tables.
Do not use in the following areas: a) Wet or damp surfaces, b) Outdoors, c) Enclosed spaces that may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, paint, paint thinners, mothproofing agents, flammable dust).
Turn off all controls before plugging in or unplugging the appliance.
Unplug when not in use and before cleaning or maintenance. Refer to the pre-filter maintenance section for pre-filter care.
Wash external/non-electronic parts by hand with a damp cloth only. Do not immerse. Cleaning with chemicals may damage the unit.
Ensure filters are in place after routine maintenance.
Not suitable for use with solid-state speed controls.

ODOR ELIMINATION TECHNOLOGY

23. When interacting with the Odor Elimination Technology cartridge, please note:

a) Do not attempt to disassemble the Odor Elimination Technology cartridge.
b) Avoid direct contact with the odor capsule in the cartridge.
c) Do not inhale the odor eliminator technology cartridge directly.
d) Keep away from children and pets.
e) Keep away from heat, sparks, and open flames.
f) Do not expose to direct sunlight.
g) Avoid contact with fabrics and surfaces.

ODOR CARTRIDGE FIRST AID

a) Eye contact: If wearing contact lenses, remove them. Rinse continuously with water for several minutes.
b) Skin contact: Wash your hands thoroughly after use. If irritation or redness develops, seek medical advice/attention.
c) Inhalation: Move the person to fresh air. If symptoms persist, seek medical advice/attention.
d) Ingestion: Do NOT induce vomiting. Seek medical advice/attention.

SAVE THESE INSTRUCTIONS

SETTING UP YOUR AIR PURIFIER

Parts:

1. Air Outlet Vents
2. Odor Elimination Technology Dial
3. Control Panel
4. Front Display
5. Air Purifier Body
6. Air Inlet Vents
7. Pre-Filters
8. HEPA Filter
9. HEPA Filter Cover

Tips for Setting Up Your Air Purifier

Ensure the front panel of the air purifier faces away from the nearest wall.
Do not move the unit while it is operating. Turn off power and unplug the air purifier before moving.
Ensure the air inlet vents are not blocked.
Do not place anything on top of the air purifier.
Do not place the air purifier near heaters or radiators.
Keep the air purifier away from direct sunlight and water or other liquids.
Keep all doors and windows closed when operating the air purifier.
Avoid using in very humid environments.

Setup Steps:

Do not plug in the air purifier. First, carefully turn the air purifier upside down and place it on a flat surface. Turn the filter cover counter-clockwise to unlock, then lift to access the HEPA Filter.
Remove the HEPA Filter from its plastic packaging. Reinstall the HEPA Filter in either direction.
With the HEPA Filter reinstalled, turn the filter cover clockwise until it clicks into place.
Place the air purifier on a flat surface, at least 8 cm away from walls and objects. If your air purifier has Odor Elimination Technology, locate and install the odor cartridge following the instructions.
Carefully remove the yellow label on the front of the air purifier to access the display. Plug the air purifier into an electrical outlet and press the power button on the top control panel.
Once the air purifier is powered on, it will begin analyzing air quality, indicated by rotating lights. After a few seconds, the air purification device will display the current air purification status.

Note: HEPA-Filter Technology allows for up to 5 years* of use per HEPA filter. *Tested per GB/T18801-2022 P.CCM, based on 50% CADR drop, 4m² cleaning area, and 12 hours/day operation at MAX fan speed.

CONTROL PANEL

The air purifier has a control panel on the top and a display on the front.

Top Control Panel

Displays the current air purification status based on the selected Air Quality mode on the top control panel.

Top Control Panel Buttons

Power (On/Off): Press to turn the power on or off.
Fan Speed: Press repeatedly to cycle through fan speed options: A Auto, 1 Quiet, 2 Low, 3 Medium, 4 High, 5 Maximum. For optimum filter life and performance, adjust fan speeds until the A indicator appears, then select Auto mode. In Auto mode, the fan speed adjusts automatically: as air quality improves, fan speed decreases. As air quality worsens, fan speed increases. Refer to the Optimize Fan Speed section for tips and more information.
Air Quality: Press to cycle through air quality display options and filter life information. Refer to the Pre-Filter Maintenance section for more information on the dust filter, or the Air Quality Settings section for more information on air quality.
Brightness: Adjusts the brightness of both the front display and the top control panel. Cycle through 3 options: full brightness, dimmed, or completely dimmed. In completely dimmed mode, the air purifier continues to operate with the LED lights off, which is perfect for nighttime use.
Child Lock: Press and hold the Brightness and Fan Speed buttons simultaneously for two seconds to lock the top control panel buttons. Press and hold both buttons again for two seconds to unlock.

Tips & Tricks:

Eco Mode Performance Optimization: After 5 minutes of achieving 100% clean air status in Auto Mode, your air purifier will enter Eco Mode. The unit's filter life will be optimized. The fan will turn off until a significant number of particles are detected, optimizing your HEPA Filter's lifespan.
Mute Beeper: Press and hold the Air Quality and Fan Speed buttons simultaneously for two seconds to turn off notification sounds. Press and hold both buttons again for two seconds to re-enable them.

Front Display

Displays the current air purification status based on the selected Air Quality mode on the top control panel.

AIR QUALITY SETTINGS

The built-in sensor detects your air purification status to provide real-time information. Use the AIR QUALITY button to cycle through air quality display options.

INFO	FRONT DISPLAY
% STATUS	Displays the air purification status rating: Poor: 0%-69% Medium: 70%-84% Good: 85%-100% % STATUS uses particulate matter (PM) air purification standards set by the EPA (Environmental Protection Agency) to calculate the status rating.
PARTICULATE SIZE	The PM (particulate matter) value is the amount of particles in your air, measured in micrograms (µg) per cubic meter. Your air purification device measures three particulate sizes: PM1, PM2.5, and PM10.
PM1	Displays the count of PM1 sized particles in your air, including ultra-fine allergens.	Shark Air Purifier HP300 Series Owner's Guide: Safety, Setup, and Maintenance Comprehensive owner's guide for the Shark Air Purifier HP300 Series, covering important safety instructions, setup procedures, control panel operation, air quality understanding, maintenance, odor neutralizer technology, and warranty information.
	Shark HP100 Series Air Purifier Owner's Guide Comprehensive owner's guide for the Shark HP100 Series Air Purifier, detailing safety instructions, setup, operation, understanding air quality, troubleshooting, maintenance, odor neutralizer technology, accessories, and warranty information.
	Shark HP100 Series Air Purifier Owner's Guide: Setup, Operation, and Maintenance Comprehensive owner's guide for the Shark HP100 Series Air Purifier. Learn how to set up, operate, understand air quality, troubleshoot, and maintain your Shark air purifier with HEPA filtration.
	Shark HP150 Series Air Purifier User Manual and Safety Guide This user manual provides comprehensive instructions for the Shark HP150 Series Air Purifier, covering essential safety information, setup procedures, operational guidance, maintenance routines for filters, troubleshooting tips, details on the Anti-Odor Technology and Clean Sense IQ features, warranty information, and technical specifications.
	Shark Air Purifier HP070 Quick Start Guide and Safety Instructions Comprehensive guide for setting up and safely operating the Shark Air Purifier HP070. Includes step-by-step setup instructions, air quality indicators, usage tips, and essential safety precautions for household use.
	Shark Air Purifier 3-in-1 HC500/450 Series Owner's Guide Comprehensive guide for operating and maintaining the Shark Air Purifier 3-in-1 HC500/450 Series, including setup, modes, safety instructions, and troubleshooting.
	Shark Cordless Pro IZ500 Series Owner's Guide: PowerFins Plus & Odor Neutralizer Vacuum Your essential guide to the Shark Cordless Pro IZ500 Series vacuum cleaner. Learn about assembly, operation, PowerFins Plus, Odor Neutralizer, Clean Sense IQ, MultiFLEX wand, maintenance, and troubleshooting for optimal cleaning performance.
	Shark Cordless Pro IZ500 Series: Quick Start Guide & Safety Instructions Comprehensive guide for setting up, using, and maintaining the Shark Cordless Pro IZ500 Series vacuum cleaner with PowerFins Plus and Odor Neutralizer Technology. Includes essential safety warnings and maintenance tips.