JennAir Bottom Mount Refrigerator Detailed Planning Dimensions Guide
Models: JBBFL30NMX, JBBFR30NMX
Product Dimensions
This section details the physical dimensions of the refrigerator, presented in both inches and millimeters. The diagrams illustrate various views and critical measurements for installation planning.
Overall Dimensions:
- Height: 84 inches (2134 mm)
- Width: 24 inches (610 mm)
- Depth: 24 3/4 inches (628 mm)
- Cabinet Depth: 25 3/8 inches (645 mm)
- Overall Depth (with door): 54 3/16 inches (1377 mm)
- Door Clearance (at 105°): 7 1/4 inches (185 mm)
- Base Height: 39 inches (992 mm)
- Base Depth: 52 9/16 inches (1335 mm)
- Top Clearance: 1/4 inch (6 mm)
- Bottom Clearance: 1/4 inch (15 mm)
- Side Clearance (for door swing): 19 11/16 inches (500 mm)
- Front Panel Thickness: 1/8 inch (3 mm)
- Internal Height: 81 1/4 inches (2064 mm)
- Internal Depth: 29 7/16 inches (748 mm)
- Internal Depth (at bottom): 29 1/2 inches (749 mm)
- Internal Depth (at top): 29 15/16 inches (761 mm)
Note: Dimensions are for planning purposes only. Specifications are subject to change.
Opening Dimensions
This section specifies the required cutout dimensions for installation.
- Minimum Height: 84 inches (2134 mm)
- Width: 30 inches (762 mm)
- Side Clearances: 3 inches (76 mm) on each side.
- Area 'A': A clear zone must be maintained on each side for the anti-tipping brackets.
Note: Dimensions are for planning purposes only. Specifications are subject to change.
Electrical and Water Supply Behind the Unit
This section details the location of electrical and water connections at the rear of the refrigerator.
Integrated Series Connections:
- Electrical Connection (E): Located 9 7/16 inches (240 mm) from the top and 4 3/4 inches (120 mm) from the side.
- Water Connection (W): Located 13/16 inch (20 mm) from the bottom and 4 3/4 inches (120 mm) from the side.
- Power Cord Length: 9.8 feet (3 meters).
Note: Dimensions are for planning purposes only. Specifications are subject to change.
Electrical Requirements
[!] WARNING: Electrical Shock Hazard
- Always plug into a grounded 3-prong outlet.
- Do not remove the ground prong.
- Do not use an adapter.
- Do not use an extension cord.
- Failure to follow these instructions can result in death, fire, or electrical shock.
Electrical Supply Specifications:
- Requires 110 V-120 V, 60 Hz AC power.
- Must be supplied by a fused, grounded circuit (15 A or 20 A).
- A dedicated circuit is recommended.
- Use an outlet that cannot be turned off by a switch.
- Do not use an extension cord.
Water Pressure Requirements
- A cold water supply with pressure between 20 psi and 120 psi (138 kPa and 827 kPa) is required for the ice maker.
- Consult a licensed, qualified plumber for any questions regarding water pressure.
Reverse Osmosis Water Supply
A reverse osmosis (RO) water filtration system can be used if its water pressure meets the refrigerator's requirements. The refrigerator features an auto-bypass water filtration system; simply remove the water filter for RO system use.
Location Requirements
[!] WARNING: Explosion Hazard
- Keep flammable materials and vapors, such as gasoline, away from the refrigerator.
- Failure to comply can result in death, explosion, or fire.
Floor Load Capacity:
- The floor must be able to support the product's total weight, exceeding 373 lb (169 kg), including door panels and contents.
- The flooring under the product must be level with the surrounding room floor.
- The front of the cabinetry must be plumb (perfectly vertical).
Because Whirlpool Corporation policy includes a continuous commitment to improve its products, the right to change materials and specifications without notice is reserved.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.