Blaze by Sonance PowerZone Connect Quick Start Guide

Carton Contents

• Amplifier unit
• Mains power cable
• Input connector x 2 or x 4
• GPIO socket connector
• Output connector x 1 or 2 or x 4
• Adhesive rubber feet x 4
• Document pack

Connection Sockets

The amplifier features various connection sockets for network control, audio input/output, and speaker connections. These include:

• Network Control: For network connectivity.
• GPIO: Configurable General Purpose Input/Output.
• S/PDIF Audio I/O: Digital audio input/output.
• Dante® (optional): For integration with audio over IP networks.
• Audio Inputs: Balanced Euroblock and Unbalanced RCA Phono inputs.
• Speaker Outputs: Configurable speaker outputs supporting High or Low impedance.
• AC MAINS: Power input connection.

Diagrams illustrating the layout of these connection sockets are provided for different models (e.g., 4 Channel version, 508/1008D versions).

Installation Notes

• Speaker connection options (High or Low impedance) can be selected independently for each output channel via the PowerZone™ Control Web App.
• Analogue input sensitivity can be adjusted independently for each channel via the PowerZone™ Control Web App.
• S/PDIF digital audio I/O routing can be configured via the PowerZone™ Control Web App.
• GPIO options can be configured via the PowerZone™ Control Web App.
• Optional Audinate Dante® interface for integration with audio over IP (AoIP) networks and installations.
• Ensure adequate airflow for safe and reliable operation. Do not exceed the maximum operating temperature of 40°C.

Wireless Network Control Connection

A mobile, laptop, or desktop device with WiFi and a web browser is required.

1. Connect the amplifier to mains power and wait for the front panel WiFi indicator to turn green.
2. Search for WiFi networks and connect to 'PowerZone™ Connect (product serial number)' using the password 'password'. The amplifier serial number is on the rear panel.
3. Open a web browser and enter the IP address: 192.168.4.1. The configuration web interface will open.

It is recommended to change the default WiFi password after initial connection.

Wired Network Control Connection

A laptop or desktop device with Ethernet functionality and a web browser is required.

1. Connect the amplifier's Network Control socket directly to a laptop/desktop or through a switch.
2. Connect the amplifier to mains power and wait for the front panel Network indicator to turn green.
3. The amplifier is configured to DHCP from the factory. The network router will assign an IP address. A network scanning app can help identify the IP address if needed.
4. Download and launch the PowerZone™ Control Center desktop application from blaze-audio.com/support.
5. The amplifier's name and serial number will be automatically detected in the PowerZone™ Control Center.
6. Select the desired PowerZone™ Connect amplifier in PowerZone™ Control Center for configuration. Refer to the PowerZone™ Connect manual for detailed setup instructions.

It is recommended to secure the amplifier's LAN settings with a password via Settings > Security.

Support

A full user manual with detailed information on installation, mounting, accessories, and amplifier operation is available online at www.blaze-audio.com. Alternatively, scan the QR code provided.

Important Safety Instructions

General Safety:

• Read and keep all instructions.
• Heed all warnings and follow all instructions.
• Do not use the apparatus near water.
• Clean only with a dry cloth.
• Do not block ventilation openings. Install according to manufacturer instructions.
• Do not install near heat sources.
• Connect the power cord to a mains socket outlet with a protective earthing connection.
• Do not defeat the safety purpose of the plug. If the plug does not fit the outlet, consult an electrician.
• Protect the power cord from damage.
• Do not unplug by pulling the cord; use the plug.
• Unplug during lightning storms or when unused for long periods.
• Refer all servicing to qualified personnel. Servicing is required for damage, liquid spills, exposure to rain/moisture, abnormal operation, or drops.
• The AC mains plug is the disconnect device and must remain accessible.

Electrical Warnings:

• AVIS RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR. (WARNING: RISK OF ELECTRIC SHOCK. DO NOT OPEN.)
• CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
• This equipment must be earthed.
• Class 2 Wiring: Exposed high voltage on speaker terminals may cause an unpleasant sensation.

FCC Compliance:

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If interference occurs, users are encouraged to correct it by reorienting/relocating the antenna, increasing separation between equipment and receiver, or connecting to a different circuit. Consult the dealer or a technician for help.

Consignes de sécurité importantes (French Safety Instructions)

• Veuillez lire ces instructions.
• Conservez ces instructions.
• Respectez tous les avertissements.
• Suivez toutes les instructions.
• N'utilisez pas cet appareil près de l'eau.
• Nettoyez uniquement avec un chiffon sec.
• N'obstruez pas les ouïes de ventilation. Installez l'appareil en respectant les instructions du fabricant.
• Éloignez l'appareil des sources de chaleur.
• Pour réduire le risque d'électrocution, le cordon d'alimentation doit être connecté à une prise de courant avec une mise à la terre de protection.
• Respectez le dispositif de protection de mise à la terre de la prise secteur. Si la fiche secteur fournie ne correspond pas, faites remplacer la prise par un électricien.
• Disposez les câbles de sorte qu'ils ne puissent pas être piétinés ou coincés.
• Ne débranchez pas l'appareil en tirant sur le cordon. Utilisez la fiche.
• Débranchez cet appareil lors des orages ou des longues périodes d'inutilisation.
• Confiez toute réparation à un technicien qualifié.
• Le coupleur de l'appareil, ou la fiche secteur, est le dispositif de déconnexion du secteur et doit rester facilement accessible.
• Câblage Classe 2: Haute tension exposée sur les bornes des haut-parleurs peut entraîner une sensation désagréable.