Danfoss FHM-C1, FHM-C2 Compact Mixing Shunt
Installation Guide
Product Overview
This document provides installation instructions for the Danfoss FHM-C1 and FHM-C2 Compact Mixing Shunts. These shunts are designed for efficient mixing of heating water.
Installation Steps
The installation process involves several key steps, illustrated with diagrams:
Step 1: Initial Setup
Ensure the unit is correctly positioned. A red 'X' symbol indicates an incorrect placement or orientation.
Step 2: Component Attachment
Attach the necessary components. This involves connecting parts as shown in the diagram, with specific attention to orientation.
Step 3: Securing Components
Secure the attached components. The diagram shows a multiplier 'x 2-5', indicating the number of times a specific action or component might be repeated or applied.
Step 4: Final Check
Perform a final check. A green thumb-up emoji indicates a successful installation or correct configuration.
Important Considerations:
- Pressure Drop: The diagrams illustrate pressure drop (ΔP) values of 0.6 bar and 0.1 bar, indicating expected pressure differences during operation.
- Torque Specification: A torque of 50 Nm is specified for certain connections, indicated by a wrench symbol.
- Temperature Range: The product is suitable for temperatures between 20°C and 50°C, as shown on a temperature scale.
- Compliance: The product adheres to VDI 2035 & VDTÜV Tch 1466 standards, as indicated by a warning symbol and text. This suggests a focus on water treatment and system protection.
- Grundfos Component: A Grundfos FTC (013G5081) component is referenced, suggesting integration or compatibility with Grundfos products.
Technical Details
The installation guide references specific technical standards and components, including:
- Pressure drop values: 0.6 bar and 0.1 bar.
- Torque requirement: 50 Nm.
- Temperature range: 20-50 °C.
- Compliance standards: VDI 2035 & VDTÜV Tch 1466.
- Associated component: Grundfos FTC (013G5081).
Contact Information
For further information, Danfoss A/S can be contacted:
- Heating Segment
- Website: danfoss.com
- Phone: +45 7488 2222
- Email: heating@danfoss.com
Danfoss reserves the right to alter products without prior notice. All trademarks are the property of their respective owners.
