TP-Link LiteWave PoE Switches Datasheet
Ideal for Basic Networks
Product Overview
The TP-Link LiteWave Series PoE Switches require no configuration and provide PoE (Power over Ethernet) ports. They can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). This allows electrical power to be transmitted along with data in a single cable, enabling network expansion to locations without power lines or outlets, such as where APs, IP Cameras, or IP Phones are deployed.
Network Diagram
A network diagram illustrates a typical setup where the Internet connects to a Router, which then connects to a TP-Link LiteWave PoE Switch. The switch is shown powering connected devices such as an IP Camera, an IP Phone, and Access Points.
Key Features & Highlights
- Multiple PoE ports for simultaneous data and power transfer over a single cable.
- Compatibility with IEEE 802.3af/at compliant PDs to expand network capabilities.
- 802.1p/DSCP QoS support for smooth, latency-sensitive traffic management.
- Up to 250m data and power transmission capability under Extend Mode, specifically designed for surveillance systems.
- Isolation Mode (available on LS109P & LS1210GP models) enables one-click client traffic separation for enhanced security and performance.
- PoE Auto Recovery ensures stable operation of PoE devices by automatically rebooting unresponsive devices.
- Plug-and-play functionality requiring no configuration or installation.
Product Specifications
| Model | LS105LP | LS106LP | LS109P | LS105GP | LS108GP | LS1210GP |
|---|---|---|---|---|---|---|
| Standards | IEEE802.3i, IEEE802.3u, IEEE802.3x,IEEE802.3af | IEEE802.3i, IEEE802.3u, IEEE802.3x,IEEE802.3af, IEEE802.3at | IEEE802.3i, IEEE802.3u, IEEE802.3x,IEEE802.3af, IEEE802.3at | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p, EEE 802.3z | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p, EEE 802.3z |
| Interface | 5 10/100 Mbps RJ45 Ports | 6 10/100 Mbps RJ45 Ports | 9 10/100 Mbps RJ45 Ports | 5 10/100/1000 Mbps RJ45 Ports | 8 10/100/1000 Mbps RJ45 Ports | 9 10/100/1000 Mbps RJ45 Ports, 1 1000 Mbps SFP port |
| Network Media (Cable) | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) 1000BASE-T: UTP category 5e cable or above (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) 1000BASE-T: UTP category 5e cable or above (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) 1000BASE-T: UTP category 5e cable or above (maximum 100 m); EIA/TIA-568 100 Ω STP (maximum 100 m) |
| PoE Standard | PoE Standard: IEEE 802.3af | IEEE 802.3af, IEEE 802.3at | IEEE 802.3af, IEEE 802.3at | IEEE 802.3af, IEEE 802.3at | IEEE 802.3af, IEEE 802.3at | IEEE 802.3af, IEEE 802.3at |
| PoE Port | Port 1-4, up to 15.4 W per port | Port 1-4, up to 30 W per port | Port 1-8, up to 30 W per port | Port 1-4, up to 30 W per port | Port 1-8, up to 30 W per port | Port 1-8, up to 30 W per port |
| PoE Power Budget | 41 W*** | 63 W*** | 65 W*** | 62 W*** | 61W*** | 61W*** |
| Auto Negotiation | Yes | Yes | Yes | Yes | Yes | Yes |
| Auto MDI/MDIX | Yes | Yes | Yes | Yes | Yes | Yes |
| Max Power Consumption | 2.40 W (220 V/50 Hz no PD connected) 46.45 W (220 V/50 Hz with 41 W PD connected) | 2.53 W (220 V/50 Hz no PD connected) 47.76 W (220 V/50 Hz with 41 W PD connected) | 3.67 W (220 V/50 Hz no PD connected) 73.24 W (220 V/50 Hz with 63 W PD connected) | 4 W (220 V/50 Hz no PD connected) 74.46 W (220 V/50 Hz with 65 W PD connected) | 5.53 W (220 V/50 Hz no PD connected) 71.61 W (220 V/50 Hz with 62W PD connected) | 7.3 W (220 V/50 Hz no PD connected) 76.96 W (220 V/50 Hz with 61 W PD connected) |
| Max Heat Dissipation | 8.15 BTU/h (220 V/50 Hz no PD connected) 157.93 BTU/h (220 V/50 Hz with 41 W PD connected) | 8.61 BTU/h (220 V/50 Hz no PD connected) 162.38 BTU/h (220 V/50 Hz with 41 W PD connected) | 12.48 BTU/h (220 V/50 Hz no PD connected) 249 BTU/h (220 V/50 Hz with 63 W PD connected) | 13.6 BTU/h (220 V/50 Hz no PD connected) 253.16 BTU/h (220 V/50 Hz with 65 W PD connected) | 18.81 BTU/h (220 V/50 Hz no PD connected) 243.47 BTU/h (220 V/50 Hz with 62W PD connected) | 24.82 BTU/h (220 V/50 Hz no PD connected) 261.66 BTU/h (220 V/50 Hz with 61 W PD connected) |
| Forwarding Mode | Store and Forward | Store and Forward | Store and Forward | Store and Forward | Store and Forward | Store and Forward |
| Switch Capacity | 1 Gbps | 1.2 Gbps | 1.8 Gbps | 10 Gbps | 16 Gbps | 20 Gbps |
| MAC Address Table | 2k, Auto-learning, Auto-aging | 2k, Auto-learning, Auto-aging | 4k, Auto-learning, Auto-aging | 4k, Auto-learning, Auto-aging | 4k, Auto-learning, Auto-aging | 4k, Auto-learning, Auto-aging |
| Extend Mode | YES (Ports 1-4) | YES (Ports 1-4) | YES (Ports 1-8) | YES (Ports 1-4) | YES (Ports 1-8) | YES (Ports 1-8) |
| Isolation Mode | No | No | YES (Ports 1-2) | No | No | YES (Ports 1-2) |
| PoE Auto Recovery | YES (Ports 1-4) | YES (Ports 1-4) | YES (Ports 1-8) | YES (Ports 1-4) | YES (Ports 1-8) | YES (Ports 1-8) |
| Flow Control | Yes | Yes | Yes | Yes | Yes | Yes |
| Fan Quantity | 0 | 0 | 0 | 0 | 0 | 0 |
| LED | Power, Link/Act, PoE Status, PoE MAX | Power, Link/Act, PoE Status, PoE MAX | Power, Link/Act, PoE Status, PoE MAX | Power, Link/Act, PoE Status, PoE MAX | Power, Link/Act, PoE Status, PoE MAX | Power, Link/Act, PoE Status, PoE MAX |
| Dimensions | 3.9*3.9*1.0 in. (99.8 x 98 x 25 mm) | 6.2*4.0*1.0 in. (158 x 101 x 25 mm) | 6.7X3.9X1.1 in. (171 x 98 x 27 mm) | 3.9*3.9*1.0 in. (99.8 x 98 x 25 mm) | 6.2*3.9*1.0 in. (158 x 99 x 25 mm) | 8.2*4.9*1.0 in. (209 x 126 x 26 mm) |
| Certifications | CE, FCC, RoHS | CE, FCC, RoHS | CE, FCC, RoHS | CE, FCC, RoHS | CE, FCC, RoHS | CE, FCC, RoHS |
Notes:
* LS105LP and LS106LP only support IEEE 802.3af, and provide PoE Power up to 15.4W for each PoE port; other switches support IEEE 802.3af/at, and provide PoE Power up to 30W for each PoE port.
** The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission distance may vary from the quality of the cables.
*** PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
TP-Link | TP-Link PoE Products from UK Supplier
