Introduction
Thank you for purchasing this product. Please read all instructions carefully before assembly and installation to ensure your appliance serves you well. If you have any questions, please contact customer support.
Parts List
Identify all parts before beginning assembly. The main components are labeled with numbers:
- Part 1: Top Panel (curved edge)
- Part 2: Side Panel (left)
- Part 3: Side Panel (right)
- Part 4: Back Support Rail
- Part 5: Bottom Shelf
- Part 6: Base Panel
- Part 7: Cabinet Door (left)
- Part 8: Cabinet Door (right)
- Part 9: Vertical Support Panels (x2)
Hardware List
All necessary hardware is provided. Please check quantities and types:
| Code | Description | Quantity |
|---|---|---|
| A | Screw M6*35 | x8 |
| B | Screw | x8 |
| C | Dowel/Connector M6*30 (+1 spare) | x12 |
| D | Screw M4*40 | x2 |
| E | Hinge | x4 |
| F | Screw M3*12 (+1 spare) | x18 |
| G | Screw M4*16 | x2 |
| H | Handle | x2 |
| I | Screw M3*14 | x2 |
| J | Cam Lock Connector | x1 |
| K | Cam Lock | x2 |
| L | Screw M3*12 (+1 spare) | x15 |
| M | Buckle/Clip | x4 |
| N | Screw M4*16 | x1 |
| O | Washer | x2 |
| P | Mounting Bracket | x1 |
| Q | Screw M4*35 | x1 |
| R | Anti-Dumping Belt | x1 |
Note: Do not confuse similar screws. Do not tighten bolts fully until all parts are connected.
Assembly Steps
Step 01
Attach Part 1 (Top Panel) to Part 2 (Left Side Panel) and Part 3 (Right Side Panel) using hardware A. Insert hardware J into Part 6 (Base Panel). Attach Part 6 to Part 2 and Part 3 using hardware I and A.
Hardware used: J (x1), I (x2), A (x8)
Step 02
Connect Part 4 (Back Support Rail) between Part 2 and Part 3 using hardware B. Attach Part 6 (Base Panel) to Part 2 and Part 3 using hardware C. Ensure Part 6 is aligned correctly.
Hardware used: B (x4), C (x6)
Step 03
Attach Part 1 (Top Panel) to the side panels (2 & 3) using hardware C. Secure Part 5 (Bottom Shelf) between the side panels using hardware D. Ensure the main frame is stable.
Hardware used: C (x6), D (x2), B (x4)
Step 04
Insert Part 9 (Vertical Support Panels) into the designated slots. Attach them using hardware L. Secure Part 5 (Bottom Shelf) using hardware N. Place washer O onto the screw for Part P (Mounting Bracket).
Hardware used: L (x15), N (x1), O (x2), P (x1)
Step 05
Attach Part 5 (Bottom Shelf) using hardware M. These buckles have 3 optional adjustment positions.
Hardware used: M (x4)
Step 06
Attach hinges E to the cabinet doors (7 & 8) using hardware F. Then, attach the hinges to the cabinet frame (Parts 2 & 3) using hardware F. Secure the hinges with hardware K. Finally, attach handles H to the doors using hardware G.
Hardware used: E (x4), F (x18), K (x2), G (x2), H (x2)
Installation
Anti-Dumping Belt: This is an anti-dumping belt (R) that fixes the product to the wall for safety. It can be used or not, depending on your needs.
Wall Mounting:
- If mounting to a solid wall (e.g., brick or concrete), use expansion screws and self-tapping screws.
- If mounting to a wooden wall, use only self-tapping screws.
- Do not overtighten the screws.
Attach the anti-dumping belt (R) to the wall and the product as shown in the diagram, using appropriate hardware (Q, O, R).
Hardware used: R (x1), O (x1), Q (x1)
