OUKITEL RT6 User Manual

Product Overview

This document is the user manual for the OUKITEL RT6 rugged tablet.

Device Layout

Front View: The front of the tablet features a screen, a front camera, a light sensor, and a three-color indicator light.

Top View: The top edge includes the Type-C charging port and speaker sound holes.

Bottom View: The bottom edge has volume buttons (Volume+, Volume-) and speaker sound holes.

Side Views: The sides feature the SIM/TF card slot, power button, vent holes, flashlight, camera, and microphone.

Rear View: The back of the tablet displays the main camera, flashlight, vent holes, microphone, and OUKITEL branding.

Accessories and Gift Products

Included Accessories:

• Quick Charger
• Type-C Cable
• SIM card Ejector

Gift Products:

• Hardware hook (2PCS/SET)
• The screwdriver
• 4 PCS/set screw
• Leather hand belt

Battery Information

The OUKITEL RT6 has an internal battery. Battery status can be monitored via the icon displayed on the top right of the screen.

Battery Capacity: 20000 mAh

Charging: Supports 33W Fast Charging.

Battery Warnings:

• Only use OUKITEL-approved batteries specifically designed for your phone.
• Incompatible batteries can cause serious injury or damage to your phone.
• Never place batteries or phones near or inside heating devices such as microwave ovens, stoves, or radiators. Overheating can cause batteries to explode.

Getting Started

How to Insert the SIM/TF Card:

To ensure your tablet can make calls, insert the SIM card as follows:

1. Insert the ejector pin into the hole on the side and press to pop out the card tray.
2. Remove the card slot. Place 2 Nano SIM cards or one Nano SIM card and one TF card into the slot with the metal side facing down. Ensure the bevel angle of the card slot and the SIM card match.
3. With the tablet facing up, insert the cardholder into the tablet in the direction of the arrow.

How to Boot the Device:

Press and hold the power button for 3-5 seconds to boot the device.

Communication Features

Sending SMS and MMS:

SMS:

• Open the SMS app.
• Select "New Information".
• Enter a phone number or browse your contacts.
• Select "Edit Information" and enter your text.
• Send the message.

MMS-video:

• When writing a text message, select images, videos, or other files to add. You can also take a new picture or video instantly.
• Select or send.

System Settings

Language Switching:

Navigate through the menus: Main menu → Settings → System → Language and input method → Language and input method → Language → Add language. Select your desired language. The system will automatically return to the language interface. Select the icon after the language bar and drag it to the first position.

SAR Information

The maximum electromagnetic radiation absorption ratio (SAR) for this product is ≤2.0W/kg.

This complies with the requirements of the national standard GB 21288-2007 and relevant EN standards (EN62209-1:2016, EN 62209-2:2010, EN 62479:2010, EN 50360:2017, EN 50566:2017).

For full CE compliance details, visit: http://www.oukitel.com

Safety Guidelines

• Keep the tablet at least 15cm away from any medical implant or rhythm adjuster. Never place the device in your coat pocket.
• Do not expose the device and other batteries to high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters. Battery overheating can cause an explosion.
• When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the outlet.
• If the device has a non-removable battery, do not attempt to replace it yourself to avoid damaging the battery or the device.
• Using an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
• Do not disassemble, reset, insert other objects into, or immerse the battery in water or other liquids to avoid battery leakage, overheating, fire, or explosion.
• Do not drop, crush, scratch, or puncture the battery to prevent excessive external pressure, which could lead to internal short-circuit and overheating.
• The company is not responsible for accidents caused by non-standard charging equipment.

Maintenance

To use the tablet more safely and effectively, and to extend its lifespan, thoroughly understand its maintenance.

• Follow the manual's instructions to open the tablet and disassemble accessories. Do not attempt other methods.
• Avoid dropping, knocking, or shaking the tablet. Rough handling can cause screen rupture, damage to the internal circuit board, and the delicate structure.
• Do not use chemical solvents or detergents for cleaning. Wipe the tablet case with a soft cotton cloth dampened with water and mild soap.
• Clean the lens (e.g., camera lens) and display with a clean, dry, soft cloth.
• Troubleshooting Abnormal Images/Crashes:
  • For tablets with non-removable batteries: Press and hold the power button for at least 12 seconds to force a restart (unlock the tablet upon restart). This can resolve general issues.
  • For tablets with removable batteries: Remove the battery, reinsert it, and restart the tablet to resolve the issue.
• When the charger is not in use, unplug it from the power outlet. Do not connect a fully charged battery to the charger for extended periods, as overcharging will shorten battery life.

Standard Package Contents:

Package box, Tablet, Manual, Protective film, Protective case, Headset, USB data cable, OTG cable, Charger.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

SAR Information Statement

Your wireless phone is a radio transmitter and receiver, designed not to exceed emission limits for radiofrequency (RF) energy set by the FCC. These limits are part of comprehensive guidelines establishing permitted RF energy levels for the general population, based on standards developed by independent scientific organizations. The standards include a substantial safety margin for the safety of all persons.

The exposure standard for wireless mobile phones uses the Specific Absorption Rate (SAR). The FCC SAR limit is 1.6 W/kg. Tests for SAR are conducted at the phone's highest certified power level across all tested frequency bands.

While the SAR is determined at the highest certified power level, the actual SAR level during operation can be well below the maximum. This is because the phone operates at multiple power levels, using only the power required to reach the network. Generally, the closer you are to a base station antenna, the lower the power output.

Before sale, phone models must be tested and certified by the FCC to ensure they do not exceed safe exposure limits. Tests are performed in various positions and locations, including body-worn measurements.

The FCC has granted Equipment Authorization for this model, with all reported SAR levels evaluated as compliant with FCC RF exposure guidelines. SAR information is on file with the FCC and can be found at www.fcc.gov/oet/fccid by searching FCC ID: 2ANMU-RT6SPU.

Additional SAR information is available on the Cellular Telecommunications Industry Association (CTIA) website at www.wow-com.com.

In the United States and Canada, the SAR limit for public use is 1.6 W/kg (averaged over one gram of tissue). The standard includes a safety margin for public protection and to account for measurement variations.

Body-worn Operation: This device was tested for typical body-worn operations. To comply with RF exposure requirements, maintain a minimum separation distance of 10mm between the user's body and the handset/antenna. Third-party accessories like belt-clips or holsters should not contain metallic components. Avoid accessories that do not meet these requirements. Use only the supplied or an approved antenna.