ClearOne

ClearOne VIEW Lite Encoder EJ100

• Google Docs
• Google Drive
• Download [pdf]
  

  File Info : application/pdf, 9 Pages, 1.03MB

  Document Document

VIEW® Lite EJ100 Digital AV Encoder JPEG2000 Based Audio/Video Encoder
Quick-Start Guide

Table of Contents
PRODUCT OVERVIEW................................................................... 1 VIEW® Lite AV over IP Streaming System......................................... 1 Device Application............................................................................ 1
ENCODERS AND DECODERS IN A NETWORK............................ 1 PARTS INCLUDED.......................................................................... 3 MOUNTING THE EJ100 ENCODER............................................... 3 CONNECTING THE EJ100 ENCODER........................................... 4 CONFIGURING THE ENCODER.................................................... 6 COMPLIANCE................................................................................. 6 PART NUMBERS............................................................................. 7

PRODUCT OVERVIEW

QUICK-START GUIDE

VIEW® Lite AV over IP Streaming System
The VIEW Lite platform is designed to stream high-quality audio and video over a TCP/IP network (AVoIPTM). An encoder, such as a VIEW Lite EJ100, takes digital video and audio from a source device, such as a receiver, cable box or DVR, and makes the source available anywhere on the dedicated Ethernet LAN network. A decoder, such as the VIEW Lite DJ100, takes the combined video and audio stream and decodes it. The DJ100 then sends the video and audio to a display such as a HDTV or projector and sound system.
Device Application
The EJ100 is a high-definition, Internet Protocol, JPEG2000 based Audio/Video encoder. The EJ100 connects to a TCP/IP network using a Gigabit Ethernet connection. Used with the DJ100, the EJ100 encoder is designed to be installed at the location of the target AV source.
Installation should be done by a qualified Dealer Service representative.

ENCODERS AND DECODERS IN A NETWORK
The VIEW Lite EJ100 encoder receives input from an AV source device such as BluRay Player, DVD Player, etc. and distributes it over a dedicated TCP/IP network using a standard Gigabit Ethernet connection. The VIEW Lite decoder, as a counterpart, is installed at the location of the target video display(s). They operate together; the encoders providing the IP data for the decoders to deliver to the displays.
1

VIEW LITE EJ100 ENCODER 2

QUICK-START GUIDE PARTS INCLUDED The following items are included with the VIEW Lite EJ100 Encoder: · 1X VIEW Lite EJ100 Encoder Unit · 1X 12V DC Power Adapter · 1X Detachable Plug · 1X Phoenix Euroblock (Male, 3.5 mm, 3 pins) · 1X IR Emitter (3.9 ft / 1.2 m) · 1X IR Wideband Receiver (3.9 ft / 1.2 m, 30 kHz ~ 50 kHz) · 2X Mounting Ears with Screws Verify that all items have been received. If there is any issue, please contact your ClearOne representative.
MOUNTING THE EJ100 ENCODER
The VIEW Lite EJ100 Encoder comes with mounting ears that facilitate mounting on a table or wall.

Mounting ears attached to the unit

Mounting ears shown separately
3

VIEW LITE EJ100 ENCODER CONNECTING THE EJ100 ENCODER VIEW Lite EJ100 Front Panel

Power LED Indicator

Status LED Indicator

Mode Switch

DIP Switch

A. LED »» Power: Solid red indicates the unit is powered on. »» Status: · Off (no light): Unit powered off, or in the boot process. · Blinking blue: Unit is disconnected from the EJ100 or an active video source, or the network is down. · Solid blue: Unit is connected to the EJ100 and a video stream is displayed.
B. Mode Switch: Set the mode for the RS-232 function. Under
the default Normal Mode, a RS-232 connection enables serial
command control of display or 3rd-party devices. Under Debug
Mode, it enables debugging.
C. DIP Switch: Routes audio and video together with IR, and USB
signals between DJ100 and EJ100 units. To route video from
a particular source to display, toggle switches on the EJ100 to
match the positions on the chosen DJ100. To unlink a EJ100
from an DJ100, reset the EJ100 factory defaults.
NOTE: Before using the DIP switch, check that routing operations are not performed by other tools. If they are, the switch function is
disabled. Press and hold the Reset Button to enable the switch.

4

QUICK-START GUIDE

VIEW Lite EJ100 Rear Panel
RS232 Serial Command

HDMI Audio/Video Loopback Output

12V DC Input Reset Button Network/PoE 3.5mm

3.5mm

USB 2.0 HDMI Audio/ 3.5mm 3.5mm

Port

Audio Input Audio Output Port

Video Input IR Input IR Output

A. 12V DC Input: Power provided by the power supply.
B. Reset Button: Press and hold for 5+ seconds for factory reset.
C. Ethernet/PoE Port: A RJ-45 10/100/1000Mbps Ethernet/PoE port that connects to a PoE power injector, or PoE Ethernet Network Switch for power, monitoring, and/or configuration. · Left/Green LED: Indicates a good network connection. · Right/Yellow LED: Blinks to indicate network activity.
D. 3.5mm Audio Input: Jack for analog audio input that replaces the HDMI audio when plugged in.
E. 3.5mm Audio Output: Jack for analog audio output extract from HDMI.
F. RS-232 Ports: Port for debugging and display/3rd-party device serial command control.
G. USB Type B Port: Connectivity to a PC, MAC, or laptop for USB HID (KVM) functionality.
H. HDMI In Port: Connectivity to an AV source device.
I. HDMI Loopback Output Port: Connectivity to an AV display device for loopback output. 5

VIEW LITE EJ100 ENCODER J. IR Input Connector: Compatible with IR sensor (3.5mm) for Network Passthrough. K. IR Output Connector: Compatible with IR emitter (3.5mm) for source display or 3rd-party control.
CONFIGURING THE ENCODER
The EJ100 is set up for use in an Ethernet network using the VIEW Lite CONSOLE software, a PC-based program that allows you to configure devices so they can communicate across an Ethernet network. These processes are detailed in the VIEW Lite CONSOLE User Manual available for viewing or download at www.ClearOne.com.
COMPLIANCE
Details on compliance can be found on the ClearOne website under "Resource Library".
6

PART NUMBERS

QUICK-START GUIDE

910-0100-001 910-0100-002 910-0100-003

VIEW Lite Encoder EJ100 VIEW Lite Decoder DJ100 VIEW Lite Controller CJ100

CONTACT INFORMATION

HEADQUARTERS:
5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116
US & Canada:
Tel: 801.975.7200 TollFree: 800.945.7730 Fax: 801.303.5711
International:
Tel: +1.801.975.7200 e-mail: global@clearone.com

Sales: Tel: 801.975.7200 e-mail: sales@clearone.com
TechSales Tel: 801.974.3760 e-mail: techsales@clearone.com
TechSupport Tel: 801.974.3760 e-mail: tech.support@clearone.com

7 © 2018 ClearOne, Inc. All rights reserved.
Information in this document is subject to change without notice. QSG-0058-001 Revision 1.0 JULY 2018