司顺工业设计

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 28 Pages, 1.45MB

Document Document

Technical Support and E-Warranty Certificate www.vevor.com/support
HEAT PRESS MACHINE
We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

HEAT PRESS MACHINE
MODEL:SJY-H15151P/JY-H12151P
NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
-1-

Symbol

Symbol Description
Warning: To reduce the risk of injury, the user must read the instructions manual carefully.
This symbol, placed before a safety comment, indicates a kind of precaution, warning, or danger. Ignoring this warning may lead to an accident. To reduce the risk of injury, fire, or electrocution, please always follow the recommendations shown below.
CORRECT DISPOSAL: This product is subject to the provision of European Directive 2012/ 19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

WARNING
1.Warnings must be followed carefully to avoid body injury, improper use may result in electric shock, fire, personal injury and other damage. 1)Keep unplug when moving the machine. 2)Keep unplug when installing accessories. 3)Place on a f at and stable platform and operate under ventilated conditions. 4)Wear special protective equipment when operating the machine. 5)Do not use this machine in a hazardous-location. 6)Do not use when the machine is not working properly. 7)Do not disassemble and repair this machine. 8)Do not use an unsuitable AC Outlet. 9)Do not touch the heating plate when the machine is heating 10)Do not use in humid environment or contact with water Do not infiltrate liquid in the machine to prevent fire or electric shock caused by short circuit. 11)Do not use the power supply that does not meet the rated voltage. The
-2-

power supply that does not meet the specified voltage may cause fire or electric shock. 12)Ensure that the machine is grounded so as not to cause harm to body. 13)Do not touch the rotating rod or bearing part with y ur fingers during use in case of injuries. 14)If the machine is not in use for a long time , please unplug the power cord from the socket. 15) Do not use the machine during thunderstorms or lighting to avoid damage to the machine. 16)Place the machine smoothly on the flame-retardant table and keep away from flammable and explosive items. 17)Please stop using it if the machine smokes, emits a peculiar smell , or becomes noisy and in other abnormal conditions. 18)This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge If they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision 19)Type X attachment: If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. 20) In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Please turn off the power when plug or unplug the connector
-3-

FCC INFORMATION
CA UT ION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment! This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This product may cause harmful interference. 2)This product must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product. Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception,which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures. · Reorient or relocate the receiving antenna. · Increase the distance between the product and receiver. · Connect the product to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for assistance.
-4-

Contents
1. SPECIFICATION......................................................................6 2. MACHINE STRUCTURE PRESENTATION...................................7 3. PART LIST..........................................................................8 4. CUP BAKING MACHINE PACKING LIST.......................................9 5. INSTALLATION STEPS FOR CUP BAKING MACHINE.................10 6. OPERATION.........................................................................12 7. CONTROL PANEL.................................................................13 8. PARAMETER SETTING...........................................................14 9. REPLACE BAKING TRAY MAT..................................................16 10. REPLACE BAKING CAP MAT...................................................17 11. REPLACE BAKING COASTER..................................................19 12. RECOMMENDED PARAMETER................................................21 13. TROUBLE SHOOTING..........................................................22
-5-

1. SPECIFICATION

Model

SJY-H15151P

Heat Size
Temperature Range

15x15inch 32-480°F(0-250)

Product

SJY-H12151P 12x15inch
32-480°F(0-250)

Time Range

0-999 Seconds

0-999 Seconds

Voltage

120V~ 60Hz 220-240V~ 50Hz 120V~ 60Hz 220-240V~ 50Hz

Power

1400W

1350W

950W

900W

-6-

2. MACHINE STRUCTURE PRESENTATION
-7-

3. PARTS LIST

Part A Part B Part C Part D Part E Part F Part H Part I Part J

5in1













8in1



















A: 8inch Plate Press Attachment D: Curved Base
H: 30oz Mug Press Attachment

B: 10in Plate Press Attachment E: Mug Press Frame
I: 12oz Mug Press Attachment

C: Arched Press Plate
F: 6oz Mug Press Attachment J: 17oz Mug Press Attachment

-8-

4. CUP BAKING MACHINE PACKING LIST

No.

Picture

Component

 5*6mm round head screws

Quantity 18



Round tube

3

side panel



2



four-hole billiards

1



straight handle

1



Heating elements for cups

1

8*12mm Yuan machine



4

screws



Adjustment knob

1



plane strip

1

-9-

5. INSTALLATION STEPS FOR THE MUG HEAT PRESS
1. Installation steps
- 10 -

Installation complete
- 11 -

6. OPERATION
- 12 -

7. CONTROL PANEL

Display Areas Indicator Lights
Function Buttons

Upper Lower Temp Set Time
 PLUS



MINUS

SET UP

Displays temperature values or parameter names. Displays timer values or parameter settings. Indicates heating is operating. Indicates setting is operating. Indicates countdown time is operating. Increases values or converts settings in parameter menus. Decreases values or converts settings in parameter menus
Enters/Exits primary parameter menus or confirms settings when pressed.

Change temperature unit ( or )

MODE

Starts/Stops/Resets countdown

- 13 -

8. PARAMETER SETTING
1.HOW TO TURN ON/OFF AND HOW TO START?
Press the switch button on the side of the digital box to start the machine. After setting temperature, press "MODE" button once to count down, and press again to reset.
2.HOW TO SET THE TEMPERATURE/TIME?
Press once to set the temperature, press twice to set the time, press three times to change temperature unit and press again to exit.
3.HOW TO SET THE TEMPERATURE/TIME TO INCREASE OR DECREASE?
 Set the time/temperature increase -- Set the time/temperature decrease
4.HOW TO CHANGE THE TEMPERATURE UNIT FROM F AND C?
Press "SET UP" button 3 times, the display will showing C-F, please press "+" or "-" to adjust C(Celsius) or F(Fahrenheit) according to your demands.
- 14 -

5.HOW TO DO TEMPERATURE CORRECTION?
Press and hold for 5 seconds to enter the temperature correction setting.
(Range+30 or-30°, initial value is 0)
HOW TO HEAT PRESSING?(FOR EXAMPLE,T-SHIRT PRINTING)
1.Make sure the wire is well connected, and the power plug is well connected to the wall socket, then press the power switch to turn on. 2.Rotate the pressure knob to get the right pressure required. 3.Set the temperature and the time you want. 4.The buzzer will sound when the temperature reaches the setting temperature. Then place the object (e.g. a T-shirt) on press bed, and let the transfer paper with images facing down the object (e.g. a T-shirt)(PS: It is suggested to put a white cloth upon the transfer paper to avoid unnecessary mark when the temperature is too high.) 5.Press down the handle (meantime the sound will stop), then press the "MODE" button to count down and machine will start to transfer. 6.The buzzer will sound again when the scheduled time is up, then lift up the handle (meantime the sound will stop), the transfer work is finished.
HOW TO CALIBRATE YOUR HEAT PRESS MACHINE 1. Turn the pressure knob counterclockwise a few times to lower pressure on the platens. 2.Place a piece of paper onto bottom of the platen. 3.Close the revolve press using the handle. 4.Pull on the paper. 5.If the paper moves at all, turn the knob clockwise and try again. 6.Try again and repeat until the paper doesn't move at all. This is your "Medium" pressure. From the "Medium" setting, high pressure will be clockwise one to two turns. Low pressure will be counterclockwise one to two turns. (The number of turns will depend on the thickness of the garment. SLIDE HANDLE ASSEMBLY METHOD
- 15 -

9. REPLACE BAKING TRAY MAT
1. Use high-temperature tape to fix the pattern on the tray, and then cover it with a silicone mat of suitable size (8in or 10in).

2. When reaching the set temperature, put the tray on the press bed. (Silicone mat opposite to bottom, tray bottom opposite to heating plate). It is suggested to set the countdown time around 15min (900s). Ps. Refer to `operation example'

operation example

3.Remove the heating plate and place it on the plate, keeping the side without silica gel pad facing upward.

Recommended parameter Set Temp: 200
Count time900S

- 16 -

10. REPLACE BAKING CAP MAT
- 17 -

- 18 -

11. REPLACE BAKING COASTER
- 19 -

- 20 -

12. RECOMMENDED PARAMETER
- 21 -

13. TROUBLE SHOOTING
1.The temperature is out of control: set temperature 180(356°F), but the actual
temperature is above 200 (392°F).
Wait for a while and check. If the emperature keeps an error beyond 20, contact us and we will change a new digital controller for you. 2.Temperature drops when the machine starts transferring. It's normal if the machine drops within 10C, as the printed item is considerablely cold. Part of the heat is transferred from machine to the printed item, especially when transferring patterns on mugs and plates. 3.Printed effect: print color is a pale or faded image. The pressure is not high enough, the temperature is too low, or the pressing time is too short. Please adjust the pressure/temperature or increase the heating time. 4.Printed effect: print color is too darkened, deep or blurred Reason 1: The temperature is too high /or the pressing time is too long. Please adjust the temperature or reduce the heating time. Reason 2: Pressing time is too short/using poor quality transfer paper. Please increase the heating time or use high quality transfer paper. 5.Display screen does not turn on or display screen is working but temperature is not heating up. Pls kindly send us your problems. Our staffs will give instructions according to your specific problems with patience. We will resend you the related spare parts to help solve the problems asap. Ps. Pattern material always uses heat transfer paper and DTF film Please check the DTF film suggested removing time to avoid that the remove time is incorrect cause failure.
- 22 -

Tutorial Video Temperature controller operation method
Temperature sensor replace tutorial
- 23 -

Manufacturer:Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

- 24 -

Technical Support and E-Warranty Certificate www.vevor.com/support