CASIO G-SHOCK

International Warranty for G-SHOCK Watches

For Russia, Belarus, Kazakhstan, and Ukraine

The international warranty card is included with your G-SHOCK watch. This translation is not the international warranty for G-SHOCK watches.

The international warranty for CASIO G-SHOCK watches purchased in Russia, Belarus, Kazakhstan, and Ukraine is valid only outside these countries. Service for CASIO G-SHOCK watches in Russia, Belarus, Kazakhstan, and Ukraine is provided based on the manufacturer's regional warranty certificate.

For information about other countries, see the G-SHOCK INTERNATIONAL WARRANTY.

International Warranty for CASIO G-SHOCK Watches

CASIO Computer Co., Ltd. (“CASIO”) guarantees that your “Casio G-SHOCK” watch will be repaired free of charge by a member of the international CASIO warranty network (see contact information) under the conditions listed below, based on the “International Warranty for Casio G-SHOCK Watches” card.

1. To receive warranty service, you must present the card completed by the seller and the purchase receipt.
2. This warranty is valid for 1 year from the date of the first purchase of the product in case of a malfunction that occurred during normal use in accordance with the user manual (instructions). After the specified period, the buyer will be charged for repairs.
3. The warranty does not cover:
   • Malfunctions due to improper, rough, or negligent handling;
   • Malfunctions due to fire or other natural disasters;
   • Malfunctions due to improper repair or adjustment performed by a non-authorized Casio service center;
   • Damage or wear of the case, bracelet (strap), or battery;
   • Failure to present proof of purchase when submitting for repair;
   • Expiration of the warranty period.
4. If you need to send your CASIO G-SHOCK watch to a member of the international CASIO warranty network for repair, pack the watch carefully, including this warranty card, purchase receipt, and a description of the malfunction.
5. CASIO and members of the CASIO international warranty network are not responsible for the loss, damage, or alteration of data, as well as the contents of the watch's memory.
6. This warranty is the sole express or implied basis for warranty repair of CASIO G-SHOCK watches outside of Russia and Ukraine.
7. These warranty services are provided only by members of the CASIO international warranty network.
8. These warranty services are provided only to the original purchaser.

Rights arising from this warranty supplement and do not affect the statutory rights of the buyer.

Members of the CASIO G-SHOCK International Warranty Network

IMPORTANT INFORMATION - READ FIRST

Battery

The battery installed in the watch at the factory may discharge during shipping and storage. If you notice signs of insufficient power (dim display), replace the battery at the nearest authorized CASIO service center or CASIO dealer.

Water Resistance

The following is prohibited for all categories of watches:

• Pressing buttons underwater;
• Adjusting the hands underwater;
• Unscrewing the crown underwater.

If the watch is exposed to salt water, rinse it thoroughly and dry it. Do not wear a watch with a leather strap while swimming. Avoid prolonged contact of leather straps with water.

Watches are classified by ratings (from I to V) according to their degree of water resistance. Check your watch's rating using the table below to determine its correct usage.

Notes:

• I: Watch is not water-resistant. Avoid contact with any moisture.

II WR (Water Resistant) means the model is waterproof according to ISO 2281. Brief contact with water will not cause any problems.

III Water resistance to 5 Bar (50 meters) means the watch can withstand water pressure of the specified level and can be used while showering and for brief swimming.

IV Water resistance to 10 Bar (100 meters) means the watch can be used for regular swimming and snorkeling.

V Water resistance to 20 Bar (200 meters) means the watch can be used for diving with scuba gear (excluding depths requiring helium-oxygen mixture).

Watch Care

• Never attempt to open the case or remove the back cover yourself.
• The rubber gasket protecting the watch from water and dust should be replaced every 2-3 years.
• If moisture gets inside the watch, have it checked immediately by your dealer or CASIO distributor.

Do not expose the watch to extreme temperatures.

Although the watch is designed for active daily use, wear it carefully and avoid drops.

Do not fasten the strap too tightly. You should be able to fit a finger between your wrist and the strap.

To clean the watch and strap, use a dry soft cloth, or a soft cloth dampened with a mild neutral detergent solution. Never use volatile substances (e.g., gasoline, solvents, aerosol cleaning agents, etc.).

When not using your watch, store it in a dry place.

Avoid contact with gasoline, cleaning solvents, aerosol sprays, adhesives, paints, etc. Chemical reactions caused by these materials can damage gaskets, the case, and the watch's polish.

Some watch models feature silk-screened graphics on the strap. Be careful when cleaning such straps to avoid damaging the designs.

For watches with plastic straps...

You may find a whitish powdery substance on the strap. This substance is harmless to your skin or clothing and can be easily removed by wiping with a cloth.

Exposure of the plastic strap to sweat or moisture, as well as storage in high humidity conditions, can lead to damage, tearing, or cracking of the strap. To ensure a long service life for the plastic strap, wipe it clean of dirt and water with a soft cloth at the first opportunity.

For watches with fluorescent cases and straps...

Prolonged exposure to direct sunlight can cause the fluorescent color to gradually fade.

Prolonged contact with moisture can cause the fluorescent color to gradually fade. If any moisture gets on the watch surface, wipe it off as soon as possible.

Prolonged contact with any other damp surface can cause the fluorescent color to discolor. Check if moisture has been removed from the fluorescent surface and avoid contact with other surfaces.

Strong friction of a surface with applied fluorescent paint against another surface may lead to the transfer of fluorescent paint to that surface.

When using the product in conditions of sharp temperature changes, slight condensation may form on the inside of the glass. This phenomenon is due to the laws of physics and is not a defect.

CASIO COMPUTER CO., LTD. is not responsible for any damage that may occur during the use of this watch and does not accept any claims from third parties.

GENERAL DESCRIPTION

• Use button "C" to switch between modes. A description of each mode is provided below.
• Pressing button "C" after completing an operation in any mode returns you to the current time mode.
• To illuminate the display in any mode, press button "D".

Mode Display Sequence: Current Time Mode → Alarm Mode → Stopwatch Mode → Timer Mode

CURRENT TIME MODE

How to Set the Current Time and Date

1. In the current time mode, press button "A". The digits in the seconds field will start flashing, indicating they can be changed.
2. Press button "C" to move the flashing digits to the next field according to the sequence below.

3. While the seconds digits are flashing (and can be changed), press button "B" to reset them to "00". If you press "B" when seconds are between "30" and "59", the minutes will be incremented by one as seconds reset to "00". If seconds are between "00" and "29", minutes remain unchanged.
4. While digits in any other field (except seconds) are flashing, press button "B" to increase their value. Holding down button "B" allows for faster adjustment.
5. While digits are flashing in any field, you can switch between 12-hour and 24-hour format by pressing button "D".
6. After setting the time and date, press button "A" to return to the current time mode.

Automatic Return: If no button is pressed for several minutes while digits are flashing, the flashing will stop, and the watch will automatically return to the current time mode.

Backlight

If the backlight function is enabled, the watch display will illuminate when alarm signals (see below), timer signals, or hourly chimes occur.

• At any time, pressing button "D" will illuminate the display for approximately 2 seconds, regardless of whether the backlight function is enabled.
• This watch uses an electro-luminescent light source for its backlight, which may lose luminescence power with prolonged use.
• Frequent use of the backlight shortens battery life.

How to Enable and Disable the Backlight Function

Press and hold button "B" in the current time mode for one or two seconds to enable or disable the backlight function. When enabled, a backlight indicator will appear on the display.

ALARM MODE

You can set the time for an audible alarm, specifying hour, minute, month, and date. If the alarm signal is enabled, the alarm will sound for 20 seconds at the set time. If the hourly chime is enabled, audible signals will sound at the beginning of each hour.

Types of Audible Signals

The type of audible signal depends on your needs.

How to Set Daily Alarms

Set the hours and minutes for the desired alarm time. Enter "-" for the month field and "-" for the date field (see section "How to Set Alarm Time" for details). This will set the alarm to sound daily at the specified time.

How to Set an Alarm for a Specific Date

Set the month, date, hours, and minutes for the desired alarm time and date. The alarm will sound at the specified time on the specified day.

How to Set Alarms for the Month

Set the month, hours, and minutes for the desired alarm time. Enter "- -" for the date field (see section "How to Set Alarm Time" for details). The alarm will sound daily during the specified month at the set time.

How to Set Monthly Alarms

Set the date, hours, and minutes for the desired alarm time. Enter "-" for the month field (see section "How to Set Alarm Time" for details). The alarm will sound once a month on the specified date at the set time.

How to Set Alarm Time

1. In the alarm mode, press and hold button "A" until the hour digits start flashing. This indicates the hour value can be changed. The alarm is automatically enabled when set.
2. Press button "C" to move the flashing digits to the next field according to the sequence below.

3. Press button "B" to increase the value of the flashing digits. Holding down button "B" allows for faster adjustment.
4. The alarm time format (12-hour or 24-hour) matches the format set in the current time mode.
5. When using the 12-hour format, be careful to distinguish between AM and PM when setting the alarm time.
6. After setting the alarm time, press button "A" to return to the alarm mode.

Automatic Return: The watch will automatically return to the alarm mode if no button is pressed for several minutes.

How to Stop an Alarm

Press any button to stop the alarm.

How to Enable and Disable Alarm and Hourly Chime Settings

In the alarm mode, press button "B" to change the status of alarm and hourly chime settings according to the sequence below (see "Types of Audible Signals" on page 12).

TIMER MODE

The countdown time can be set from 1 second to 24 hours. When the timer reaches zero, an audible signal will sound for 10 seconds unless any button is pressed.

How to Set Timer Time

1. In the timer mode, press button "A". The flashing digits in the hour field indicate that the value can be changed.
2. Press button "C" to move the flashing digits to the next field according to the sequence below.

3. Press button "B" to increase the value of the flashing digits. Holding down button "B" allows for faster adjustment.
4. To set the timer to the maximum 24 hours, set it to "0:00 00".
5. After setting the timer time, press button "A" to return to the timer mode.

Automatic Return: If no button is pressed for several minutes while digits are flashing, the flashing will stop, and the watch will automatically return to the timer mode.

How to Use the Timer

1. In the timer mode, press button "B" to start the timer.
2. Press button "B" again to stop the timer.
3. You can resume the timer by pressing button "B".
4. Stop the timer, then press and hold button "A" until the timer time is reset to its initial value.

Auto-Repeat Function:

With the auto-repeat function turned off, when the timer reaches zero, an audible signal will sound for 10 seconds (unless interrupted by pressing any button). After the signal, the countdown stops, and the previously set initial time is restored.

How to Enable and Disable the Auto-Repeat Function

1. In the timer mode, press button "A". Flashing digits in the hour field indicate they can be changed.
2. Press button "D" to enable or disable the auto-repeat function.
3. Press button "A" to return to the timer mode.

With the auto-repeat function enabled, when the timer reaches zero, an audible signal sounds. The previously set time is restored, and the countdown starts again. You can stop the countdown by pressing button "B" and manually reset the timer to its initial state using button "A".

STOPWATCH MODE

The stopwatch allows you to measure elapsed time, split times, and record the first two results in competitions. The maximum measurement range is 23 hours, 59 minutes, 59.99 seconds.

How to Measure Elapsed Time

1. Press button "B" to start the stopwatch.
2. Press button "B" to stop the stopwatch.
3. You can resume the measurement by pressing button "B" again.
4. Press button "A" to reset the stopwatch display to zero.

For the first 60 minutes, the display shows minutes, seconds, and hundredths of a second. After 60 minutes, the display format changes to show hours, minutes, and seconds.

How to Measure Split Times

1. Press button "B" to start the stopwatch.
2. Press button "A" to display the elapsed time from the start of the event up to this point. The stopwatch continues its internal timekeeping.
3. Press button "A" to reset the split time display and continue measuring the total elapsed time.
4. You can repeat steps 2 and 3 as many times as needed.
5. Press button "B" to stop the time measurement.
6. Press button "A" to reset the stopwatch display to zero.

How to Record the First Two Results in Competitions

1. Press button "B" to start the stopwatch.
2. Press button "A" when the first competitor crosses the finish line to record their result.
3. Press button "B" when the second competitor crosses the finish line.
4. Press button "A" to display the second competitor's result.
5. Press button "A" again to reset the stopwatch display to zero.

TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION

Name: Electronic / Electro-mechanical Quartz Wristwatch (Men's/Women's)

Brand: CASIO

Manufacturer: CASIO COMPUTER Co., Ltd.

Manufacturer's Address: 1-6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Importer: LLC "Kasio", 127015, Russia, Moscow, Butyrskaya St., Bldg. 77

Warranty Period: 2 years

Address of Authorized Organization for Claims: Indicated on the warranty card