Behringer X AIR XR16/XR12 Digital Mixer
Quick Start Guide
Introduction
The Behringer X AIR XR16 and XR12 are 16/12-input digital mixers designed for control via iPad or Android tablets. They feature programmable Midas preamps, 8 line inputs, an integrated Wi-Fi module, and a USB stereo recorder.
Product Overview
The XR16 and XR12 offer comprehensive mixing capabilities in a compact form factor. They are ideal for live sound reinforcement, studio recording, and podcasting.
Key Features
- 16/12-Input Digital Mixer
- 8/4 Programmable Midas Preamps
- 8 Line Inputs
- Integrated Wi-Fi Module
- USB Stereo Recorder
- Remote control via iPad/Android tablets and computers
Connectivity and Setup
The mixers can be connected and controlled in several ways:
Network Connections
- Ethernet LAN: Connect directly to a router or computer using an Ethernet cable.
- Wi-Fi Client Mode: Connect the mixer to an existing Wi-Fi network.
- Access Point Mode: The mixer creates its own Wi-Fi network for direct connection.
IP Address and DHCP: The mixers support DHCP client, DHCP server, and static IP configurations for flexible network integration.
Connection Examples
Controls and Operation
The mixer's front and rear panels feature various input and output connectors, as well as control elements.
Key Controls and Ports
- ETHERNET Port: For network control via LAN or Wi-Fi router.
- REMOTE Switch: Selects between ETHERNET, WIFI CLIENT, and ACCESS POINT modes.
- RESET Button: Resets network parameters or factory settings.
- MIDI IN/OUT: For connecting external MIDI devices.
- USB Port (Type A): For connecting USB flash drives for file storage, stereo recording, and playback.
- XLR COMBO Jacks: Accept both balanced and unbalanced XLR and 1/4" plugs.
- 1/4" Input Jacks: Accept balanced or unbalanced 1/4" plugs.
- HI-Z Inputs (Channels 15/16 on XR16, 11/12 on XR12): For direct connection of guitars and basses.
- AUX SEND: For sending monitor mixes to powered speakers or headphone mixers.
- MAIN L/R: XLR outputs for sending the main mix to amplification systems or monitors.
- PHONES Jack: 1/4" TRS jack for connecting headphones.
- PHONES LEVEL Knob: Adjusts the headphone output level.
- POWER Switch: Turns the unit on and off.
MIDI Implementation
The XR16/XR12 supports MIDI control for various functions, including snapshots, faders, mutes, and panorama/balance.
MIDI RX/TX | Channel | Command | CC No. | Value | Comment | |
---|---|---|---|---|---|---|
Snapshot | 1 | Prg Chg | 1-64 | Program Changes 1-64 on Channel 1 can be used to recall snapshots 1-64 stored inside X AIR mixers. | ||
Fader | CH Faders | 1 | CC | 0-15 | 0/127 | Input Channels |
Fader | CH Faders | 1 | CC | 16 | 0/127 | USB Recorder Playback (stereo) |
Fader | CH Faders | 1 | CC | 17-20 | 0/127 | FX1-4 Return (stereo) |
Fader | Send Faders | 1 | CC | 21-26 | 0/127 | Aux Sends / Subgroups |
Fader | Send Faders | 1 | CC | 27-30 | 0/127 | FX 1-4 Send |
Fader | Main Fader | 1 | CC | 31 | 0/127 | Main LR (stereo) |
Mute | CH Mutes | 2 | CC | 0-15 | 0/127 | Input Channels |
Mute | CH Mutes | 2 | CC | 16 | 0/127 | USB Recorder Playback (stereo) |
Mute | CH Mutes | 2 | CC | 17-20 | 0/127 | FX 1-4 Return (stereo) |
Mute | Send Mutes | 2 | CC | 21-26 | 0/127 | Aux Sends / Subgroups |
Mute | Send Mutes | 2 | CC | 27-30 | 0/127 | FX 1-4 Send |
Mute | Main Mute | 2 | CC | 31 | 0/127 | Main LR (stereo) |
Panorama/Balance | CH PAN | 3 | CC | 0-15 | 1...127 | Panorama Input Channels; value 64 = center |
Panorama/Balance | CH PAN | 3 | CC | 16 | 1...127 | Balance USB Recorder Playback (stereo); value 64 = center |
Panorama/Balance | CH PAN | 3 | CC | 17-20 | 1...127 | Balance FX 1-4 Return (stereo); value 64 = center |
Panorama/Balance | Aux/Sub Pan | 3 | CC | 21-26 | 1...127 | Panorama Aux Sends / Subgroups; value 64 = center |
Panorama/Balance | Main Bal | 3 | CC | 31 | 1...127 | Balance Main LR (stereo); value 64 = stereo |
X OSC | Text based OSC | SYX | Open Sound Control via Sysex FO 00 20 32 32 TEXT F7. With 'TEXT' being OSC strings in hex format, up to 39 kB in length. |
Technical Specifications
Processing
Feature | XR16 | XR12 |
---|---|---|
Processing Channels | 16 input channels, 1 stereo USB return channel, 4 stereo FX return channels, 6 aux buses, main LR | 16 input channels, 1 stereo USB return channel, 4 stereo FX return channels, 6 aux buses, main LR |
Internal FX Engine | 4 true stereo | 4 true stereo |
Signal Processing | 40-bit floating point | 40-bit floating point |
A/D-D/A Conversion | 24-bit @ 44.1/48 kHz, 114 dB dynamic range | 24-bit @ 44.1/48 kHz, 114 dB dynamic range |
Analog I/O Latency* | 0.8 ms | 0.8 ms |
Connectors
Feature | XR16 | XR12 |
---|---|---|
Mic Preamps | 8 Midas-designed programmable mic preamps | 4 Midas-designed programmable mic preamps |
Line Inputs | 8 TRS, balanced | 8 TRS, balanced |
Main Outputs | 2 XLR, balanced | 2 XLR, balanced |
Aux Outputs | 4 XLR, balanced | 2 TRS, balanced |
Phones Output | 1 TRS | 1 TRS |
MIDI Input/Output | 1/1 DIN | 1/1 DIN |
Ethernet | 1 RJ45 | 1 RJ45 |
USB Port | Type A | Type A |
Mic Input Characteristics
Feature | XR16 | XR12 |
---|---|---|
Preamplifier Design | Midas | Midas |
THD+Noise, 20 dB Gain, 0 dBu Output | <0.005%, A-weighted | <0.005%, A-weighted |
Phantom Power, switchable per input | 48 V | 48 V |
Equivalent Input Noise Level, XLR (Input shorted) | -128 dBu, A-weighted | -128 dBu, A-weighted |
CMRR, XLR, @ 20 dB Gain (typical) | >60 dB | >60 dB |
CMRR, XLR, @ 40 dB Gain | >65 dB | >65 dB |
Input/Output Characteristics
Feature | XR16 | XR12 |
---|---|---|
Frequency Range @ 48 kHz Sample Rate, 0 dB to -1 dB | 10 Hz - 22 kHz | 10 Hz - 22 kHz |
Dynamic Range, Mic Input to Analog Output (typical) | 105 dB | 104 dB |
A/D Dynamic Range, Mic Preamps to Converters (typical) | 109 dB | 109 dB |
D/A Dynamic Range, Converters and Output | 108 dB | 108 dB |
Crosstalk Rejection @ 1 kHz, Adjacent Channels | 90 dB | 90 dB |
Mic Input Impedance XLR, Unbalanced/Balanced | 5 kΩ / 10 kΩ | 5 kΩ / 10 kΩ |
Max Input Level, XLR (Unclipped) | +23 dBu | +21 dBu |
High-Z Input Impedance TRS, Unbalanced/Balanced | 1 MΩ / 2 MΩ | 1 MΩ / 2 MΩ |
Line Input Impedance TRS, Unbalanced/Balanced | 20 kΩ / 40 kΩ | 20 kΩ / 40 kΩ |
Max Input Level, TRS (Unclipped) | +23 dBu | +21 dBu |
Output Characteristics
Feature | XR16 | XR12 |
---|---|---|
Output Impedance, XLR, Unbalanced/Balanced | 50 Ω / 50 Ω | 50 Ω / 50 Ω |
Output Level, XLR, Nominal/Max | +4 dBu / +16 dBu | +4 dBu / +16 dBu |
Output Impedance TRS, Unbalanced/Balanced | 50 Ω / 50 Ω | 50 Ω / 50 Ω |
Output Level, TRS, Nominal/Max | +4 dBu / +16 dBu | +4 dBu / +16 dBu |
Phones Output Impedance/Level | 40 Ω / +35 dBm (Stereo) | 40 Ω / +35 dBm (Stereo) |
Residual Noise Level, XLR and TRS | -92 dBu, A-weighted | -92 dBu, A-weighted |
WLAN Module
Feature | XR16 | XR12 |
---|---|---|
Antenna | External, SMA connector, 50Ω | External, SMA connector, 50Ω |
Access Point, Client Count | Max. 4 | Max. 4 |
IEEE 802.11 b/g Standard | ||
Frequency Range | 2.4 GHz | 2.4 GHz |
WLAN Channels (Wi-Fi Client, Access Point) | 1-11 / 1-11 | 1-11 / 1-11 |
Max Output Power | 19 dBm (802.11b) / 18 dBm (802.11g) | 19 dBm (802.11b) / 18 dBm (802.11g) |
Power
Feature | XR16 | XR12 |
---|---|---|
Switch Mode Power Supply | Autorange 100-240 V, (50/60 Hz) | Autorange 100-240 V, (50/60 Hz) |
Power Consumption | 30 W | 30 W |
Physical
Feature | XR16 | XR12 |
---|---|---|
Standard Operating Temperature Range | 5°C - 45°C (41°F - 113°F) | 5°C - 45°C (41°F - 113°F) |
Dimensions (H x W x D) | 333 x 149 x 140 mm (13.1 x 5.9 x 5.5 in) | 333 x 149 x 95 mm (13.1 x 5.9 x 3.7 in) |
Weight | 3.0 kg (6.6 lb) | 2.4 kg (5.3 lb) |
*Includes all channel and bus processing, excluding insert effects.
Warning: Use of this equipment in a residential environment may cause radio interference.
Important Information
- Online Registration: Register your Music Tribe product immediately upon purchase at musictribe.com. The simple online registration form helps process your warranty claims more quickly and efficiently. Read the terms and conditions of the warranty.
- Product Malfunction: If your Music Tribe product does not function as expected, contact your reseller. If your region does not have a Music Tribe reseller, contact the subsidiary or distributor listed on the "WHERE TO BUY" section of musictribe.com.
- Power Connection: Before connecting the unit to the power supply, ensure that the voltage used is correct. When replacing a fuse, use only the same type and rating.
Compliance Information
CE Declaration of Conformity: Music Tribe hereby declares that this product complies with Directive 2014/53/EU, Directive 2014/30/EU, Directive 2014/35/EU, Directive 2011/65/EU and amendment 2015/863/EU, Directive 2012/19/EU, Regulation (EU) 519/2012 REACH SVHC and Regulation (EC) 1907/2006.
The full text of the EU DoC is available at: https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S, Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd., 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom