User Manual for Lindero models including: H26, TJ7-H26, TJ7H26, H26, True Wireless Earbuds
Shenzhen SHI KISB Electronic Co., Ltd. H26 TRUE WIRELESS EARBUDS TJ7-H26 TJ7H26 h26
H26 TRUE WIRELESS EARBUDS USER MANUAL
Please read the Manual before use.
H26 ANC
Product Structure Description
LED light
TYPE-C Charging Port
Multi-Function ButtonMFB LED light
Left Picture only for reference!
ight
Packing List
1 pair of earbuds, 1 charging case, 4 pairs of tips (size: XS, S, L; M tips already on the earbuds), 1 USB cable, 1 User Manual.
Charging Case × 1
Earbud x 2
Eartips x 4
USB cable x 1
User Manual x 1
Use Instructions
Bluetooth pairing Method 1 Take out two earbuds, they will turn on and enter pairing mode automatically with orange and white indicator lights twinkling alternately; which enable the bluetooth of your phone to search "H26" and then click it for pairing, it will be connected. Method 2 When the earbuds are turned on and not connected, double-tap the left or right MFB to enter pairing mode with orange and white indicator lights twinkling alternately. Which enable the bluetooth of your phone to search "H26" and then click it for pairing, it will be connected. (Note: If the earbuds have been connected to device 1, please turn off the bluetooth function of device 1 and then try to pair with device 2.)
Power On The earbuds will turn on automatically when taken out from the charging case, with orange and white light is on for 1s; When the earbuds shut down, press the left or right MFB for 4s to boot up.
Power Off
The earbuds will turn off automatically when put back into the charging case, with the orange light always on When the earbuds is on and out of the charging case, long press the left or right MFB for 5s, then the orange light is on for 1s, that means the earbuds shut down.
Use of MFB
Triple Press
Double Press
Press for 1~2s
Left Press -
Press for 2s HearThrough / ANC / off Press
+ Right Triple Press
Reset
Press for 2s Start SIRI
Put the earbuds back into the charging case with orange light on, long press the left and right MFB for 5s, the orange light turns off. Then wait the left and right earbuds pairing again (this operation takes about 10s), finally take out the earbuds to finish resetting.
ANC Mode
In standby state/music state: <Active Noise Cancellation (ANC) Mode> When using in binaural mode, long press the left MFB for 2s to hear the HearThrough mode turned on, then press for 2s more to turn on ANC ; and press for another 2s to turn off ANC. < HearThrough mode> You can capture surrounding sounds by turning on the HearThrough mode . When you want to pay attention to the environment or have a conversation, this function is very convenient. Operation method: long press the left MFB for 2s to enter the HearThrough mode; switch in the order : HearThrough mode ¹ANC On¹ANC Off. Note: The noise reduction function (ANC) is only available when both earbuds are used at the same time. You cannot use ANC when only using one earbud. In addition, ANC will be turned off when the power of the earbud is off.
Common questions
Q: Unable to connect to phone: 1. Ensure that the product has sufficient battery, has been turned on, and has been paired with the phone to establish connection. 2. The phone' s Bluetooth activates. 3. Whether the distance between the product and the phone is more than 10 meters (about 30 feet), and whether there are walls, other obstacles or other electronic devices between them. 4. Please reset to factory settings and then re-pair. Q: No voice heard Please try to turn up the phone's volume. Q: Have noise Bluetooth is a wireless technology, which means it is very sensitive to objects between the product and the device it is paired with. The design conditions for use are: the distance between the product and the matching device is no more than 10m, and there is no big obstacle (such as wall) between the two. Note: The sound effect may be affected in noisy outdoor environment.
BatTtehirsypirnofdourcmt isatpioownered by rechargeable battery. New battery performs better after two or ° This product is powered by rechargeable battery. A new battery will performance better after two or three complete charge and discharge cycles. The battery can be charged and discharged repeatedly, but it will eventually fail. ° If this product is placed in a over hot or over cold place, such as in a closed car in summer or winter, the capacity and life of the battery will be reduced. It is recommended to store in 15¥ to 20¥ environments. It may not work in extreme cold or hot environment even if it is fully charged. The battery' s performance will be restricted when the temperature is far below freezing. ° Do not throw the battery into fire to prevent it from exploding. Damaged battery may also explode. Please follow the local regulations to deal with the battery. Please recycle the battery when possible, and do not dispose of it as household garbage. Warm Tips: If this product is not used frequently, please regularly recharge and discharge it every three months, to avoid battery damage caused by unused for too long time.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
LED
Type-C
MFB LED
/L
/
1111
x 1
x 2
x 4
x 1
x 1
1 , LED "H26" ; 2 LED "H26" : 1 1 2
1 1 2 4
1 2 5s 1s
1~2
-
2 /ANC
+
2 SIRI
5 10s
ANC(ANC
/ < ANC > 2 2 ANC 2 ANC < > 2 ; ANC ANC ANC ANC ANC
Q: 1. 2. 3. 10 30 4. Q: Q: 10
15 25
Adobe PDF library 15.00 Adobe Illustrator(R) 17.0