SHENZHEN HYSNOX TECHNOLOGY CO., LTD HY01S Bluetooth Headset 2AZ3F-HY01S 2AZ3FHY01S hy01s
Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: Fax: Website: +86-755-26648640 +86-755-26648637 www.cqa-cert.com Report Template Version: V05 Report Template Revision Date: 2021-11-03 RF Exposure Evaluation Report Report No. : CQASZ20211101913E-02 Applicant: SHENZHEN HYSNOX TECHNOLOGY CO., LTD Address of Applicant: 205, Floor 2, Xingyue Building, Shichang Road, Taoyuan Community, Dalang Street, LongHua Dist., Shenzhen, GuangDong Equipment Under Test (EUT): Product: HYSNOX Helmet Bluetooth Intercom Headset Model No.: HY-01, HY-01S, HY-02, HY-02A, HY-06, HY-08, HY-10S, HY-10A, HY-10B, HY-1006, HY-1008, HY-1009, SN-01, SN-02, SN-02A, SN-03, SN-05, SN-06A, Test Model No.: Brand Name: FCC ID: SN-08, SN-08A HY-01 HYSNOX 2AZ3F-HY01S Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2021-11-03 Date of Test: 2021-11-03 to 2021-11-26 Date of Issue: 2021-12-03 Test Result : PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By: ( Lewis Zhou ) Reviewed By: ( Rock Huang ) Approved By: ( Jack ai) The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can't be reproduced except in full. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20211001913E-02 1 Version Revision History Of Report Report No. CQASZ20211101913E-02 Version Rev.01 Description Initial report Issue Date 2021-12-03 Page:2 of 6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20211001913E-02 2 Contents Page 1 VERSION...................................................................................................................................................................... 2 2 CONTENTS.................................................................................................................................................................. 3 3 GENERAL INFORMATION....................................................................................................................................... 4 3.1 CLIENT INFORMATION................................................................................................................................................4 3.2 GENERAL DESCRIPTION OF EUT............................................................................................................................. 4 4 SAR EVALUATION.....................................................................................................................................................5 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT...........................................................................................................5 4.1.1 Standard Requirement..................................................................................................................................5 4.1.2 Limits............................................................................................................................................................... 5 4.1.3 EUT RF Exposure......................................................................................................................................... 6 Page:3 of 6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20211001913E-02 3 General Information 3.1 Client Information Applicant: Address of Applicant: Manufacturer: Address of Manufacturer: Factory: Address of Factory: SHENZHEN HYSNOX TECHNOLOGY CO., LTD 205, Floor 2, Xingyue Building, Shichang Road, Taoyuan Community, Dalang Street, LongHua Dist., Shenzhen, GuangDong SHENZHEN HYSNOX TECHNOLOGY CO., LTD 205, Floor 2, Xingyue Building, Shichang Road, Taoyuan Community, Dalang Street, LongHua Dist., Shenzhen, GuangDong SHENZHEN HYSNOX TECHNOLOGY CO., LTD 205, Floor 2, Xingyue Building, Shichang Road, Taoyuan Community, Dalang Street, LongHua Dist., Shenzhen, GuangDong 3.2 General Description of EUT Product Name: HYSNOX Helmet Bluetooth Intercom Headset Model No.: HY-01, HY-01S, HY-02, HY-02A, HY-06, HY-08, HY-10S, HY-10A, HY-10B, HY-1006, HY-1008, HY-1009, SN-01, SN-02, SN-02A, SN-03, SN-05, SN-06A, SN-08, SN-08A Test Model No.: Trade Mark: HY-01 HYSNOX Software Version: Hardware Version: Operation Frequency: A2.0 A1.0 2402MHz~2480MHz Bluetooth Version: Bluetooth v5.0 Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK, /4DQPSK, 8DPSK Transfer Rate: 1Mbps/2Mbps/3Mbps Number of Channel: 79 Hopping Channel Type: Adaptive Frequency Hopping systems Product Type: Mobile Portable Fix Location Test Software of EUT: Blue Test3 Antenna Type: Chip antenna Antenna Gain: 4.97dBi Power Supply: lithium battery:DC3.7V, 900mAh, 3.33Wh, Charge by DC5.0V Page:4 of 6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20211001913E-02 4 SAR Evaluation 4.1 RF Exposure Compliance Requirement 4.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 4.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [f(GHz)] 3.0 for 1-g SAR and 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion Page:5 of 6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20211001913E-02 4.1.3 EUT RF Exposure Measurement Data Test channel Lowest(2402MHz) Middle(2441MHz) Highest(2480MHz) Test channel Lowest(2402MHz) Middle(2441MHz) Highest(2480MHz) Test channel Lowest(2402MHz) Middle(2441MHz) Highest(2480MHz) GFSK mode Peak Output Power Tune up tolerance (dBm) (dBm) -4.120 -4.0±1 -3.350 -3.0±1 -2.770 -2.5±1 /4DQPSK mode Peak Output Power Tune up tolerance (dBm) (dBm) -3.330 -3.0±1 -2.590 -2.5±1 -2.020 -2.0±1 8DPSK mode Peak Output Power Tune up tolerance (dBm) (dBm) -2.960 -2.5±1 -2.190 -2.0±1 -1.620 -1.5±1 Maximum tune-up Power (dBm) (mW) -3.0 0.501 -2.0 0.631 -1.5 0.708 Maximum tune-up Power (dBm) (mW) -2.0 0.631 -1.5 0.708 -1.0 0.794 Maximum tune-up Power (dBm) (mW) -1.5 0.708 -1.0 0.794 -0.5 0.891 Worst case: 8DPSK Channel Maximum Peak Conducted Output Power (dBm) Tune up tolerance (dBm) Maximum tuneup Power (dBm) (mW) Lowest (2402MHz) -2.960 -2.5±1 -1.5 0.078 Middle (2441MHz) -2.190 -2.0±1 -1.0 0.794 Highest (2480MHz) -1.620 -1.5±1 -0.5 0.891 Conclusion: the calculated value 3.0, SAR is exempted. Calculated value 0.219 0.248 0.281 Exclusion threshold 3.0 Remark: The Max Conducted Peak Output Power data refer to report Report No.: CQASZ20211001913E-01 *** End of Report *** Page:6 of 6WPS 文字