soundcore Motion X600 Quick Start Guide
Welcome to your new soundcore Motion X600 portable Bluetooth speaker.
Product Overview
The soundcore Motion X600 is a high-quality portable speaker designed for immersive audio experiences.
Key Features:
- Bluetooth Connectivity
- Spatial Sound
- BassUp Technology
- TWS (True Wireless Stereo) Pairing
- Voice Assistant Integration
Getting Started
1. Powering On/Off
Press and hold the Power button [⚡️] for more than 2 seconds to turn the device ON or OFF.
2. Bluetooth Pairing
Press the Bluetooth button [?] once to enter pairing mode. The indicator will flash. Select "soundcore Motion X600" on your device's Bluetooth list to connect.
3. Spatial Sound
Press the Spatial Sound button [?] once to turn Spatial Sound ON or OFF.
4. BassUp
Press the BassUp button [?] once to turn BassUp ON or OFF.
5. Volume Control
Press the Volume Down button [➖] to decrease volume. Press the Volume Up button [➕] to increase volume.
6. Playback Control
Press the Play/Pause button [▶️/⏸️] once to play or pause music.
7. Voice Assistant
Press and hold the Voice Assistant button for 2 seconds to activate your device's voice assistant.
Connectivity
USB-C Charging Input
Connect a USB-C cable [?] to the charging port for power. The input requirement is 5V = 3A. Charging time is approximately 6 hours.
AUX IN
Connect an audio source using a 3.5mm AUX cable (not included) [?].
TWS Pairing
To pair two Motion X600 speakers for True Wireless Stereo sound:
- Turn on both speakers.
- Press and hold the Bluetooth button [?] on one speaker for 2 seconds to enter TWS pairing mode. The indicator will flash.
- Once paired, the speakers will display "CONNECTED".
App Control
Download the soundcore app from the App Store [?] or Google Play [▶️] to update firmware, customize EQ, and manage device settings. Requires Android 8.0 or later.
Important Safety Information
Please read this user manual carefully and save it for future reference.
- Do not place naked flame sources, such as lighted candles, on or near the product.
- Clean only with a dry cloth. Do not use any corrosive cleaner or oil.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Operating temperature should be between 0°C to 40°C (32°F to 104°F).
- Do not make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
- Servicing is required when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The product contains a battery pack, so it should not be exposed to excessive heat such as sunshine, fire or the like.
WARNING: Use only power supplies / attachments / accessories specified by the manufacturer.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Battery Temperature Guidelines
High or low extreme temperatures that a battery can be subjected to during use, storage or transportation:
- During use: maximum 40°C (104°F)
- Storage: -20°C to 45°C (-4°F to 113°F)
- Transportation: 5°C to 35°C (41°F to 95°F)
Compliance and Declarations
CE Declaration of Conformity
This product complies with the radio interference requirements of the European Community [??]. Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU and amendment (EU) 2015/863. The full text of the EU declaration of conformity is available at: support.soundcore.com
Maximum output power: 10 dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Notice to Canadian Users
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radio Frequency Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your body/limb. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
CAN ICES-003 (B) / NMB-003 (B)
This Class B digital apparatus complies with Canadian ICES-003.
Recycling and Disposal
This symbol [♻️] means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
This symbol indicates "separate collection" [♻️] for all batteries and accumulators. Danger of explosion if battery is incorrectly replaced. To reduce risk of fire, explosion or leakage of flammable liquid/gas, don't disassemble, crush, puncture, short external contacts, expose to temperature above 60°C (140°F), sunshine or like, expose to extremely low air pressure or dispose of in fire or water. Replace only with specified batteries.
Warranty and Support
The product comes with an 18-month limited warranty. For FAQs and more information, please visit soundcore.com.
Lifetime technical support is provided.
Customer Service Contacts:
- US/Canada: +1 (800) 988 7973
- UK: +44 (0) 1604 936200
- Germany: +49 (0) 69 9579 7960
- Middle East & Africa: +971 520750842
- UAE: +971 8000320817
- KSA: +966 8008500030
- Kuwait: +965 22069086
- Egypt: +20 8000000826
- Japan: 03 4455 7823
- China: +86 400 0550 036
- Korea: +82 02-1661-9246
- Email: service@soundcore.com
Model: A3130
Input: 5V = 3A
Charging time: 6 hours
Playtime: Up to 12 hours (varies by volume level and playback content)