KidKraft Pool Party Mansion Dollhouse

Parts and Hardware

Hardware List

• A (x23): Small screws (approx. 40 mm, White/Blanco/Blanc/Weiß/Wit)
• B (x8): Small screws (approx. 22 mm, Pink/Rose/Rosa/Pink/Rosa)
• C (x1): Medium screw (approx. 35 mm)
• D (x36): Small screws (approx. 40 mm, Yellow/Jaune/Amarillo/Gelb/Giallo)
• E (x11): Small screws (approx. 25 mm, White/Blanco/Blanc/Weiß/Wit)
• F (x5): Small screws (approx. 25 mm, Pink/Rose/Rosa/Pink/Rosa)
• G (x4): Small screws (approx. 18 mm, Pink/Rose/Rosa/Pink/Rosa)
• H (x1): Small screw (approx. 22 mm, White/Blanco/Blanc/Weiß/Wit)
• I (x1): Small screw (approx. 22 mm, White/Blanco/Blanc/Weiß/Wit)
• J (x1): Wall anchor component
• K (x1): Wall anchor component
• L (x2): Wall anchor component
• M (x1): Wall anchor component

Required Tool:

? Phillips® screwdriver

Note: All hardware dimensions are approximate.

Assembly Steps

Step 1:

Attach part 1 to part 3 using hardware A. Part 1 has a slot that aligns with holes on part 3. Insert hardware A through the holes in part 3 and into part 1. A close-up view shows hardware A being inserted and secured.

Step 2:

Attach part 2 to the assembly from Step 1. Use hardware A to secure part 2 to the side panels.

Step 3:

Attach part 5 to the front of the structure using hardware A.

Step 4:

Attach part 5 to the back of the structure using hardware A.

Step 5:

Insert dowels (part 7) into the holes on the side panels. Attach part 6 to the top using hardware C. A back view shows dowels 7 inserted into panels and part 6 attached with hardware C.

Step 6:

Attach part 10 to the side panels using hardware A.

Step 7:

Connect the two main side assemblies. Use hardware A to attach part 10 to the structure.

Step 8:

Continue assembling the structure. Attach part 11 using hardware C.

Step 9:

Attach part 12 to the structure using hardware A.

Step 10:

Further assemble the dollhouse. Attach part 13 using hardware C and part 14 using hardware A.

Step 11:

Attach part 14 to the main structure using hardware C.

Step 12:

Attach part 15 to the side panel using hardware A. A close-up shows the attachment point.

Step 13:

Attach part 16 to the structure using hardware A.

Step 14:

Attach part 16 to the side panel using hardware A. Also attach part 23 using hardware B.

Step 15:

Attach hardware 17 (likely screws) to part 3816-WT using hardware D.

Step 16:

Attach part 18 to the structure using hardware E.

Step 17:

Attach hardware 19 and 20 to the structure using hardware E.

Step 18:

Attach part 21 to the structure using hardware E.

Step 19:

Attach part 18 to the structure using hardware E.

Step 20:

Attach part 1764-WT to the structure using hardware E.

Step 21:

Attach part 15 to the structure using hardware D. A close-up shows part 509-WT being attached with hardware D.

Step 22:

Attach part 22 to the structure using hardware A.

Step 23:

Attach part 22 to the structure using hardware C.

Step 24:

Attach part 23 to the structure using hardware B. Also attach part 24 using hardware A.

Step 25:

Attach part 24 to the structure. An arrow indicates the direction of attachment.

Step 26:

Attach part 24 to the structure using hardware A and B.

Step 27:

Attach part 25 to the structure using hardware C.

Step 28:

Attach part 31 to the structure using hardware D. Also attach part 26 using hardware D.

Step 29:

Attach part 27 to the structure. An arrow indicates the direction of attachment.

Step 30:

Attach part 27 to the structure using hardware D.

Step 31:

Attach part 28 to the structure using hardware C. The text indicates: "The pink side faces out."

Step 32:

Attach part 29 to the structure using hardware D. A close-up shows the attachment.

Step 33:

Attach part 30 to the structure using hardware G. A close-up shows part 29 and 30 being attached with hardware G.

Step 34:

Attach part 32 to the structure using hardware C.

Step 35:

Attach part 33 to the structure using hardware C. A close-up shows part 4184-213-b being attached with hardware C.

Step 36:

Assemble the spiral staircase. Connect multiple steps (part 4184-213-a) together.

Step 37:

Attach the assembled spiral staircase (part 4184-213-a) to the structure using hardware D. The text notes: "Note orientation of notch."

Step 38:

Attach part 34 to the structure using hardware C.

Step 39:

Attach part 35 to the structure using hardware C. A close-up shows part 35 being attached with hardware C.

Step 40:

Attach part 36 to the structure using hardware C.

Step 41:

Attach part 37 to the structure using hardware C.

Step 42:

Attach part 38 to the structure using hardware C.

Step 43:

Attach part 5043-WT to the structure using hardware C.

Step 44:

Attach part 39 to the structure. An arrow indicates the direction of attachment.

Step 45:

Attach part 39 to the structure.

Step 46:

Attach part 40 to the structure. An arrow indicates the direction of attachment.

Step 47:

Attach part 40 to the structure.

Step 48:

Attach part 41 to the structure. An arrow indicates the direction of attachment.

Step 49:

Attach part 41 to the structure.

Step 50:

Attach part 6485-170 to the structure.

Step 51:

Attach part 978-3115 to the structure.

Step 52:

Attach the ladder (part 4297-213) to the structure.

Step 53:

Assemble two beds. Attach mattress part 6482-265-a to bed frames 6482-265-b.

Step 54:

Place the assembled beds into the dollhouse.

Step 55:

Assemble the sofa. Attach cushion part 6107-213-a to the sofa base.

Step 56:

Attach armrest part 6107-213-c to the sofa.

Step 57:

Attach armrest part 6107-213-d to the sofa.

Step 58:

Attach the final armrest part 6107-213-c to the sofa.

Step 59:

Assemble the shelving units. Connect shelves (parts 5425-213-c, -d, -e) to side panels (parts 5425-213-a, -b).

Step 60:

Assemble two chairs. Attach backrest part 6094-265-b to seat part 6094-265-a.

Step 61:

Attach the assembled chairs to the dollhouse.

Step 62:

Install component 1074-213. An arrow shows a part being inserted.

Step 63:

Install component 716-3115. An arrow shows a part being inserted.

Step 64:

Install component 710-GD. An arrow shows a part being inserted into a base.

Step 65:

Secure the dollhouse to a wall using wall anchor components J, K, L, M and hardware.

Step 66:

Secure the dollhouse to a wall using wall anchor components J, K, L, M and hardware. Includes safety warnings about wall installation.

Battery Replacement Guide

Customer Support and Warranty

For 24/7 online parts replacement, visit: parts.kidkraft.com or parts.kidkraft.eu

Contact Information:

• KidKraft, Inc.
  4630 Olin Road
  Dallas, Texas 75244 USA
  Email: customerservice@kidkraft.com
  Phone: 1.800.933.0771 or 972.385.0100
• KidKraft Netherlands BV
  Olympisch Stadion 8
  1076 DE Amsterdam
  The Netherlands
  Email: europecustomerservice@kidkraft.com
  Phone: +31 20 305 8620 (Mon-Fri, 09:00 to 17:30 GMT+1)

Warranty covers every single part for 90 days after purchase.