Intel Bluetooth Pairing. Vulnerability Fixes Add-on. • Windows 10 IoT Enterprise. • Windows Embedded Standard 7P. December 2018.
Windows Embedded operating system add-ons and security updates Release Notes | Dell Serbia
Windows Embedded operating system add-ons and security updates Release Notes Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. 2019 - 07 Rev. A02 Contents 1 Overview........................................................................................................................................................ 8 2 Support matrix...............................................................................................................................................9 3 BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running Windows Embedded Operating System................................................................................... 11 Release summary...............................................................................................................................................................11 Version.......................................................................................................................................................................... 11 Release date.................................................................................................................................................................11 Priority and recommendations................................................................................................................................... 11 Enter the title of your concept here................................................................................................................................11 Supported platforms................................................................................................................................................... 11 Previous version..........................................................................................................................................................12 Add-on details............................................................................................................................................................. 12 Tested management servers and USB Imaging Tool version................................................................................ 12 Known issues.....................................................................................................................................................................13 Installing the add-on......................................................................................................................................................... 13 Install the add-on using Wyse Management Suite................................................................................................. 13 Install the add-on using Wyse Device Manager......................................................................................................14 Install the BIOS add-on using the USB Imaging tool..............................................................................................14 4 BIOS add-on with AMD microcode to fix Side Channel vulnerability for Windows Embedded operating system............................................................................................................................................................ 16 Release summary..............................................................................................................................................................16 Version......................................................................................................................................................................... 16 Release date................................................................................................................................................................ 16 Priority and recommendations.................................................................................................................................. 16 Enter the title of your concept here...............................................................................................................................16 Supported platforms.................................................................................................................................................. 16 Previous version.......................................................................................................................................................... 17 Add-on details............................................................................................................................................................. 17 Tested management servers and USB Imaging Tool version ................................................................................17 Known issue.......................................................................................................................................................................17 Installing the add-on......................................................................................................................................................... 18 Install the add-on using Wyse Management Suite................................................................................................. 18 Install the add-on using Wyse Device Manager......................................................................................................18 Install the BIOS add-on using the USB firmware tool............................................................................................ 19 5 Intel Bluetooth Pairing Vulnerability Fixes Add-on.........................................................................................21 Release type and definition..............................................................................................................................................21 Priority and recommendations........................................................................................................................................ 21 Support matrix.................................................................................................................................................................. 21 Version information and components name................................................................................................................. 22 Contents 3 ENERGY STAR specifications........................................................................................................................................ 22 Known issues.................................................................................................................................................................... 23 6 OSComponentCleanup Add-on for Windows 10 IoT Enterprise Redstone 1.................................................. 24 Release type and definition.............................................................................................................................................24 Priority and recommendations........................................................................................................................................24 Support matrix..................................................................................................................................................................24 Installing add-on manually............................................................................................................................................... 24 Known issues....................................................................................................................................................................25 Important notes................................................................................................................................................................25 7 Language Control Add-on Version 2.1 for Windows Embedded Standard with Multi-lingual User Interface ........................................................................................................................................................ 26 Release type and definition.............................................................................................................................................26 Priority and recommendations....................................................................................................................................... 26 Supported platforms........................................................................................................................................................26 New feature...................................................................................................................................................................... 27 Add-on details...................................................................................................................................................................28 Add-on package details................................................................................................................................................... 28 Energy Star test............................................................................................................................................................... 28 8 CADMAP updates for Dell Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise ...................................................................................................................................................... 29 Release type and definition.............................................................................................................................................29 Priority and recommendations....................................................................................................................................... 29 Support matrix................................................................................................................................................................. 29 Known issues....................................................................................................................................................................30 9 Language Control Application version 1.0.0 Add-on...................................................................................... 31 Release type and definition..............................................................................................................................................31 Priority and recommendations........................................................................................................................................ 31 Supported platforms........................................................................................................................................................ 31 Supported management software................................................................................................................................. 32 Add-on package details................................................................................................................................................... 32 10 Write Filter update for Windows Embedded Standard 7 Operating System................................................ 33 Release type and definition.............................................................................................................................................33 Priority and recommendations....................................................................................................................................... 33 Supported platforms........................................................................................................................................................33 Installing the add-on manually........................................................................................................................................ 34 Known issues....................................................................................................................................................................34 Build information.............................................................................................................................................................. 34 Important notes................................................................................................................................................................34 11 Unified Write Filter RAMDisk Size add-on for Microsoft Windows 10 IoT Enterprise................................... 35 Release type and definition.............................................................................................................................................35 Priority and recommendations....................................................................................................................................... 35 Support matrix................................................................................................................................................................. 35 4 Contents Build information.............................................................................................................................................................. 35 Installing add-on manually...............................................................................................................................................36 Important notes................................................................................................................................................................36 12 Custom Field Thin Client Application add-on for Microsoft Windows 10 IoT Enterprise ............................. 37 Release type and definition............................................................................................................................................. 37 Priority and recommendations........................................................................................................................................37 Support matrix..................................................................................................................................................................37 Build information.............................................................................................................................................................. 38 License information..........................................................................................................................................................38 13 Write Filter update for Windows 10 IoT Enterprise Threshold and Redstone Operating System ................. 39 Release type and definition.............................................................................................................................................39 Priority and recommendations....................................................................................................................................... 39 Supported platforms........................................................................................................................................................39 Build information.............................................................................................................................................................. 40 Known issues....................................................................................................................................................................40 Fixed issues.......................................................................................................................................................................40 14 Windows Embedded Standard Security Update to Mitigate Meltdown and Spectre Vulnerability ...............41 Release type and definition..............................................................................................................................................41 Priority and recommendations........................................................................................................................................ 41 What is new in this release.............................................................................................................................................. 41 Test environment............................................................................................................................................................. 42 Dependencies................................................................................................................................................................... 43 Security update details.................................................................................................................................................... 43 Energy Star test............................................................................................................................................................... 43 15 WPA2 Security Vulnerability Add-on ..........................................................................................................44 Release type and definition.............................................................................................................................................44 Priority and recommendations....................................................................................................................................... 44 Supported platforms........................................................................................................................................................44 Current version.................................................................................................................................................................45 Known issues....................................................................................................................................................................46 Network adapter details..................................................................................................................................................46 Parameters to install WPA2 driver add-on....................................................................................................................46 Add-on information.......................................................................................................................................................... 47 Important notes................................................................................................................................................................48 16 Windows Security Updates........................................................................................................................ 50 Release type and definition.............................................................................................................................................50 Priority and recommendations....................................................................................................................................... 50 Supported platforms....................................................................................................................................................... 50 General features................................................................................................................................................................51 Build information.............................................................................................................................................................. 52 Dependencies and recommendations........................................................................................................................... 53 Energy star test................................................................................................................................................................53 Contents 5 17 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support .......................................................54 Release type and definition.............................................................................................................................................54 Priority and recommendations....................................................................................................................................... 54 Build details.......................................................................................................................................................................54 New features....................................................................................................................................................................55 Imaging procedure from WDM\USB environment................................................................................................ 55 Unified build................................................................................................................................................................ 55 Unified MUI build....................................................................................................................................................... 55 Threat defense........................................................................................................................................................... 55 General features...............................................................................................................................................................56 Hardware support information................................................................................................................................. 56 Menu driven Custom/ConfigMgr Sysprep ............................................................................................................ 56 New versions of connection brokers.......................................................................................................................56 Out of Box driver install............................................................................................................................................ 56 Newer Dell wallpapers............................................................................................................................................... 56 XML driven PowerShell scripts................................................................................................................................ 56 Logging support......................................................................................................................................................... 56 Flash.sys ..................................................................................................................................................................... 57 Event Viewer log preservation .................................................................................................................................57 Dell Thin Client Application ...................................................................................................................................... 57 WES7P 7067 build behavior......................................................................................................................................57 Citrix Receiver ........................................................................................................................................................... 57 Energy Star specification.......................................................................................................................................... 58 Microsoft SCCM 2012 R2 information....................................................................................................................58 vWorkspace................................................................................................................................................................ 58 CAD tool......................................................................................................................................................................58 Fixed issues.......................................................................................................................................................................58 Known issues....................................................................................................................................................................58 Tested peripherals............................................................................................................................................................60 Used and free space details............................................................................................................................................62 OS Components...............................................................................................................................................................62 Common application/Features/Files ............................................................................................................................62 QFEs added in the release.............................................................................................................................................. 64 18 Installing the add-on...................................................................................................................................68 Download the add-on package...................................................................................................................................... 68 Install the add-on using Wyse Management Suite...................................................................................................... 68 Install the add-on using Wyse Device Manager........................................................................................................... 69 Install the add-on using System Center Configuration Manager 2016--SCCM..................................................... 69 Add a device to the new device collection............................................................................................................. 70 Add a device to the existing device collection........................................................................................................70 Package deployment................................................................................................................................................. 70 19 Resources and support............................................................................................................................... 72 Accessing documents using the product search......................................................................................................... 72 Accessing documents using product selector.............................................................................................................. 72 6 Contents 20 Contacting Dell.......................................................................................................................................... 73 Contents 7 1 Overview Dell Wyse thin clients running Windows Embedded Standard operating system provide access to applications, files, and network resources. Locally installed software permits remote administration of the thin clients and provides local maintenance functions. More add-ons are available that support a wide range of specialty peripherals and features for environments that require a secure user interface. 8 Overview 2 Support matrix Table 1. Support matrix Add-on name BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running Windows Embedded Operating System BIOS Add-on with AMD microcode to fix Side Channel Vulnerability for Windows Embedded Operating System Intel Bluetooth Pairing Vulnerability Fixes Add-on Supported operating system · Windows 10 IoT Enterprise · Windows Embedded Standard 7P · Windows Embedded Standard 7 · Windows 10 IoT Enterprise · Windows Embedded Standard 7P · Windows 10 IoT Enterprise · Windows Embedded Standard 7P Release date July 2019 May 2019 December 2018 OSComponentCleanup Add- Windows 10 IoT Enterprise RedStone 1 on for Windows 10 IoT Enterprise Redstone 1 Language Control Add-on Version 2.1 for Windows Embedded Standard with Multi-lingual User Interface · Windows 10 IoT Enterprise · Windows Embedded Standard 7P · Windows Embedded Standard 7 CADMAP updates for Dell Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise Windows 10 IoT Enterprise Language Control Application version 1.0.0 Add-on · Windows 10 IoT Enterprise · Windows Embedded Standard 7P · Windows Embedded Standard 7 November 2018 October 2018 September 2018 August 2018 Write Filter update for Windows Embedded Standard 7 Operating System · Windows Embedded Standard 7P · Windows Embedded Standard 7 Unified Write Filter RAMDisk · Windows 10 IoT Enterprise RedStone 1 Size add-on for Microsoft Windows 10 IoT Enterprise · Windows 10 IoT Enterprise Threshold Custom Field Thin Client Application add-on for · Windows 10 IoT Enterprise RedStone 1 March 2018 March 2018 March 2018 Release notes BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running Windows Embedded Operating System BIOS Add-on with AMD microcode to fix Side Channel Vulnerability for Windows Embedded Operating System Intel Bluetooth Pairing Vulnerability Fixes Add-on OSComponentCleanup Addon for Windows 10 IoT Enterprise Redstone 1 Language Control Add-on Version 2.1 for Windows Embedded Standard with Multi-lingual User Interface CADMAP updates for Dell Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise Language Control Application version 1.0.0 Add-on Write Filter update for Windows Embedded Standard 7 Operating System Unified Write Filter RAMDisk Size add-on for Microsoft Windows 10 IoT Enterprise Custom Field Thin Client Application add-on for Support matrix 9 Add-on name Supported operating system Microsoft Windows 10 IoT Enterprise · Windows 10 IoT Enterprise Threshold Write Filter update for Windows 10 IoT Enterprise Threshold and Redstone Operating System · Windows 10 IoT Enterprise RedStone 1 · Windows 10 IoT Enterprise Threshold Windows Embedded · Standard Security Update to Mitigate Meltdown and Spectre Vulnerability · · · Windows 10 IoT Enterprise Windows Embedded Standard 8 Windows Embedded Standard 7P Windows Embedded Standard 7 Release date February 2018 January 2018 WPA2 Security Vulnerability · Windows 10 IoT Enterprise RedStone 1 Add-on · Windows 10 IoT Enterprise Threshold · Windows Embedded Standard 7P · Windows Embedded Standard 7 December 2017 Windows security updates · Windows 10 IoT Enterprise RedStone 1 · Windows 10 IoT Enterprise Threshold · Windows Embedded Standard 7P · Windows Embedded Standard 7 September 2017 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support Windows Embedded Standard 7 January 2017 Release notes Microsoft Windows 10 IoT Enterprise Write Filter update for Windows 10 IoT Enterprise Threshold and Redstone Operating System Windows Embedded Standard Security Update to Mitigate Meltdown and Spectre Vulnerability WPA2 Security Vulnerability Add-on Windows security updates for Microsoft Bluetooth driver spoofing vulnerability Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support 10 Support matrix 3 BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running Windows Embedded Operating System Release summary The scope of this release is to update BIOS with AMD Microcode to address the Side Channel security vulnerability for Wyse 5020 Thin Client and Wyse 7020 Thin Client running the Windows Embedded operating system. Version 2.0G Release date July 2019 Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system. Enter the title of your concept here Replace this text with your content. Supported platforms Table 2. Supported platforms Platform name Operating system · Dell Wyse 5020 Thin Client Windows Embedded Standard 7 Build number BOB0_7092_16GB.exe Memory configuration Flash size RAM size 16 GB 4 GB BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running 11 Windows Embedded Operating System Platform name Operating system Build number · Dell Wyse 7020 Thin Client · Dell Wyse 5020 Thin Client Windows Embedded Standard 7P · Dell Wyse 7020 Windows 10 IoT Enterprise Thin Client · Dell Wyse 7020 Accelerated Graphics Thin Client BOB0_7091_16GB.exe GOG0_0A79_32GB.exe Memory configuration Flash size RAM size 16 GB 32 GB 4 GB 4 GB/8 GB Previous version 2.0F Add-on details · File name--WES_5020_7020_BIOS_20G.zip · File size--7 MB The zip file contains the following three add-ons: · WES7P_5020_7020_BIOS_20G.exe · WIE10_5020_7020_BIOS_20G.exe · WES7_5020_7020_BIOS_20G.exe NOTE: The file size of the add-ons is 2.4 MB. Tested management servers and USB Imaging Tool version Table 3. Management Servers and USB Imaging Tool Version Management Server Wyse Management Suite Wyse Device Manager USB Imaging Tool Version 1.4 5.7.3 3.1.0 · Wyse Device Agent must be upgraded to the latest version before deploying the BIOS add-on. · Extract the add-on from the zipped folder and copy the .exe file to the Wyse Management Suite repository. · Extract the add-on from the zipped folder and register the .exe file to the RSP file when you deploy the package using WDM. · The client automatically reboots after you push the add-on. · The BIOS file is displayed under OS image repository in Wyse Management Suite and under Images in Wyse Device Manager. 12 BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running Windows Embedded Operating System Known issues Table 4. Known issues Issue ID WIN-1148 Description Workaround Unable to register BIOS version 2.0G pulled from the Wyse 5020 Thin Client 1 and Wyse 7020 Thin Client running 2 Windows 10 IoT Enterprise operating system using USB Imaging Tool version 3 3.1.0. 4 Configure the USB Imaging tool for the image pull operation. Extract the BIOS add-on WES_5020_7020_BIOS_20G.exe from the zipped folder. Extract the WIE10_5020_7020_BIOS_20G.exe from the WIE10 folder. Copy the file to the USB drive that is prepared for the image pull operation. WIN-1152 WIN-1157 The operating system type is displayed as WES instead of WES7P in the RSP file when you pull the BIOS using the USB Imaging Tool. There is no workaround in this release. Occasionally, there is no display on There is no workaround in this release. Wyse 7020 Accelerated Graphics Thin Client when you boot to BIOS. Installing the add-on Install the add-on using Wyse Management Suite This section describes the steps to install the add-on using Wyse Management Suite. 1 Register the device to the Wyse Management Suite server, and add the device to the respective groups. 2 Copy the .exe file to the Wyse Management Suite server repository, C:\WMS\LocalRepo\repository\osImages\zipped. 3 Log in to Wyse Management Suite. 4 Click Portal Administration, and then click File Repository under Console Settings. 5 Select the Local Repository check box. 6 Click Sync Files. Wait for the synchronization process to complete. The synchronization process copies the package from the repository to Apps and Data. 7 Click Apps and Data. The Apps and Data page is displayed. 8 Go to OS Image Repository > WES/ThinLinux and verify the copied package in the applications list. 9 To create a group in the Wyse Management Suite server, click Groups & Configs. The Groups & Configs page is displayed. 10 Click the Plus sign (+) button and enter the required details to register your client in the same group. 11 Click Apps and Data. The Apps and Data page is displayed. 12 Click WES/ThinLinux under OS Image Policies. 13 Click Add Policy to add the policy to the required group. 14 Update the required fields and click Save. 15 Click Yes to schedule the job immediately. 16 Go to the Image Policy job, and enter the description. 17 From the Run drop-down menu, select Immediately. 18 Click Preview and then click Schedule. BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running 13 Windows Embedded Operating System The package deployment takes a few minutes to complete. NOTE: System reboots once during the package deployment. Install the add-on using Wyse Device Manager This section describes the steps to install the add-on using Wyse Device Manager. 1 Extract the BIOS add-on from the WES_5020_7020_BIOS_20G.zip file to the WDM server WES_5020_7020_BIOS_20G folder with WES7, WES7P, and WIE10 sub folders are created 2 Extract WES7P_5020_7020_BIOS_20G.exe from WES7P, WES7_5020_7020_BIOS_20G from WES7 and WIE10_5020_7020_BIOS_20G.exe from WIE10 folder. WES7_5020_7020_BIOS_20G.rsp, WES7P_5020_7020_BIOS_20G.rsp, and WIE10_5020_7020_BIOS_20G.rsp are created. 3 Log in to the WDM server. 4 Click Applications in the Dell Wyse Device Manager dashboard page. The options Images, Other Packages, Agent Update, Device Configuration, and PCoIP Device Configuration are displayed. 5 Select Images. 6 Click Create Package Plus (+). The application prompts to download the Package Register utility. 7 Click Allow. The Create Package window is displayed. 8 Download the .exe file on your local repository. 9 Navigate to the folder, and run the Package Register utility file. The WDM Package Registration Utility window is displayed. 10 Enter WDM server address and user credentials in the respective fields. 11 Select the respective RSP file , and click Browse. 12 Select the add-on path. The list of selected packages is displayed. 13 Select the appropriate operating system. 14 Click Upload. The status is displayed as Success, and the package is displayed under Images. 15 Go to Devices and select the target client. 16 Click Update. 17 Go to Select Package > Images, and select the add-on package. 18 Click Save. A pop-up is displayed on the target device. 19 Click Update Now on the target device. System reboots and the BIOS is updated. After the BIOS is updated, the thin client boots to the operating system. Install the BIOS add-on using the USB Imaging tool 1 Download the Dell Wyse USB Imaging tool from downloads.dell.com/wyse. 2 Install the tool on the supported operating system. 3 Launch the USB Imaging tool. The tool displays the Image Pull screen by default. 4 Click Image Push to display the Image Push screen. 5 Plug in the USB drive to the system running the USB Imaging Tool. 14 BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running Windows Embedded Operating System 6 Click the Refresh button to populate the USB drives. 7 Select the USB drive from the Available drives drop-down list. If your USB drive contains images, these images are displayed on the screen. 8 Select the operating system architecture that you want to push to the target device. Select one of the following: · 32 bit--Select this option to push the 32-bit architecture-based operating system to the target device. · 64 bit--Select this option to push the 64-bit architecture-based operating system to the target device. 9 To add a new local image on the USB drive, click the Local tab, and add the BIOS file. Ensure that only the BIOS check box is selected. 10 Click Configure USB Drive. 11 Click Update (Recommended). The status is displayed in the progress bar. 12 Remove the USB drive. 13 Ensure that the target thin client is configured to boot from the USB drive. 14 Connect the USB drive to the thin client, and enable Boot from USB in the BIOS menu. NOTE: Select the boot mode settings as UEFI for Windows 10 IoT Enterprise, and Legacy for Windows Embedded Standard 7 and Windows Embedded Standard 7P. 15 During boot, press and hold the key P on your keyboard until the Boot menu is displayed. 16 Select your USB drive and press Enter. The device reboots from the USB drive, and the BIOS that needs to be pushed to the device is displayed. 17 In the Choose image to push to this device section, select the local BIOS from the list, and click OK. The BIOS push operation starts, and the overall status is displayed in the progress bar. 18 After the BIOS push operation is complete, remove the USB drive from the target device. The thin client restarts automatically after BIOS push operation is complete. BIOS Add-on with AMD Microcode to fix Side Channel Vulnerability for Wyse 5020 and 7020 Thin Clients running 15 Windows Embedded Operating System 4 BIOS add-on with AMD microcode to fix Side Channel vulnerability for Windows Embedded operating system Release summary The scope of this release is to update BIOS with AMD Microcode to address the Side Channel security vulnerability on Dell Wyse 5060 thin clients running the Windows Embedded Standard 7P and Windows 10 IoT Enterprise operating system. Version 1.0K Release date May 2019 Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system. Enter the title of your concept here Replace this text with your content. Supported platforms Table 5. Supported platforms Platform name Operating system Dell Wyse 5060 thin client Windows Embedded Standard 7P Windows 10 IoT Enterprise Memory configuration Flash size 32 GB 32 GB RAM size 4 GB/8 GB 4 GB/8 GB 16 BIOS add-on with AMD microcode to fix Side Channel vulnerability for Windows Embedded operating system Previous version · 1.0J--Windows Embedded Standard 7P · 1.0H--Windows 10 IoT Enterprise Add-on details · File name--WES_5060_BIOS_10K.zip · File size--6.23 MB (6,542,594 bytes) The zip file contains the following two add-ons: · WES7P_5060_BIOS_10K.exe--file size 33,54,218 bytes · WIE10_5060_BIOS_10K.exe--file size 33,59,674 bytes Tested management servers and USB Imaging Tool version Table 6. Management Servers and USB Imaging Tool Version Management Server Wyse Device Manager Wyse Management Suite USB Imaging Tool Version 5.7.3 1.4 3.1.0 · Wyse Device Agent must be upgraded to the latest version before deploying the BIOS add-on. · Extract the add-on from the zipped folder and copy the .exe file to the Wyse Management Suite repository. · Extract the add-on from the zipped folder and register the .exe file to the RSP file. · To deploy the add-on using USB Imaging Tool to the thin clients running Windows 10 IoT Enterprise, you must change the Boot mode settings to Both. · The client automatically reboots after you push the add-on. · The BIOS file is displayed under OS image repository in Wyse Management Suite and under Images in Wyse Device Manager. Known issue Table 7. Known issue Issue ID WC-1058 Issue description You cannot register the BIOS file that is unzipped for Windows Embedded Standard 7P to the USB Imaging tool. Workaround There is no workaround for this issue. BIOS add-on with AMD microcode to fix Side Channel vulnerability for Windows Embedded operating system 17 Installing the add-on Install the add-on using Wyse Management Suite This section describes the steps to install the add-on using Wyse Management Suite. 1 Register the device to the Wyse Management Suite server, and add the device to the respective groups. 2 Copy the .exe file to the Wyse Management Suite server repository, C:\WMS\LocalRepo\repository\osImages\zipped. 3 Log in to Wyse Management Suite. 4 Click Portal Administration, and then click File Repository under Console Settings. 5 Select the Local Repository check box. 6 Click Sync Files. Wait for the synchronization process to complete. The synchronization process copies the package from the repository to Apps and Data. 7 Click Apps and Data. The Apps and Data page is displayed. 8 Go to OS Image Repository > WES/ThinLinux and verify the copied package in the applications list. 9 To create a group in the Wyse Management Suite server, click Groups & Configs. The Groups & Configs page is displayed. 10 Click the Plus sign (+) button and enter the required details to register your client in the same group. 11 Click Apps and Data. The Apps and Data page is displayed. 12 Click WES/ThinLinux under OS Image Policies. 13 Click Add Policy to add the policy to the required group. 14 Update the required fields and click Save. 15 Click Yes to schedule the job immediately. 16 Go to the Image Policy job, and enter the description. 17 From the Run drop-down menu, select Immediately. 18 Click Preview and then click Schedule. The package deployment takes a few minutes to complete. NOTE: System reboots once during the package deployment. Install the add-on using Wyse Device Manager This section describes the steps to install the add-on using Wyse Device Manager. 1 Copy the respective .exe file to the WDM server. 2 Launch Wyse Device Manager and login using valid credentials. 3 Click Applications in the Dell Wyse Device Manager dashboard page. The options Images, Other Packages, Agent Update, Device Configuration, and PCoIP Device Configuration are displayed. 4 Select Images. 5 Click Create Package Plus (+). The application prompts to download the Package Register utility. 6 Click Allow. The Create Package window is displayed. 7 Download the .exe file on your local repository. 18 BIOS add-on with AMD microcode to fix Side Channel vulnerability for Windows Embedded operating system 8 Navigate to the folder, and run the Package Register utility file. The WDM Package Registration Utility window is displayed. 9 Enter WDM server address and user credentials in the respective fields. 10 Select EXE to register, and click Browse. The WDM Package Uploader window is displayed with the progress status bar. 11 Click Open. The list of selected packages is displayed. 12 Select the appropriate operating system package. 13 Click Upload. The status is displayed as Success, and the package is displayed under Images. 14 Go to Devices and select the target client. 15 Click Update. 16 Go to Select Package > Images, and select the add-on package. 17 Click Save. A pop-up is displayed on the target device. 18 Click Update Now on the target device. C:\Temp folder is created. You must edit the .rsp script manually to delete the temp folder using the command DT C:\Temp. NOTE: System reboots once during the package deployment. Install the BIOS add-on using the USB firmware tool 1 Download the Dell Wyse USB Imaging tool from downloads.dell.com/wyse. 2 Install the tool on the supported operating system. 3 Launch the USB firmware tool. The tool displays the Image Pull screen by default. 4 Click Image Push to display the Image Push screen. 5 Plug in the USB drive to the system running the USB Imaging Tool. 6 Click the Refresh button to populate the USB drives. NOTE: You can have multiple USB drives that are plugged in to your system. 7 Select the USB drive from the Available drives drop-down list. If your USB drive contains images, these images are displayed on the screen. 8 Select the operating system architecture that you want to push to the target device. Select one of the following: · 32 bit--Select this option to push the 32-bit architecture-based operating system to the target device. · 64 bit--Select this option to push the 64-bit architecture-based operating system to the target device. 9 To add a new local image on the USB drive, click the Local tab, and add the BIOS file. Ensure that only the BIOS check box is selected. 10 Click Configure USB Drive. 11 Click Update (Recommended). The status is displayed in the progress bar. 12 Remove the USB drive. 13 Ensure that the target thin client is configured to boot from the USB drive. NOTE: For thin clients running Windows 10 IoT Enterprise operating system, you must set the Boot mode to BOTH to boot from USB. 14 Connect the USB drive to the thin client. 15 During boot, press and hold the key P on your keyboard until the Boot menu is displayed. 16 Select your USB drive and press Enter. The device reboots from the USB drive, and the BIOS that needs to be pushed to the device is displayed. BIOS add-on with AMD microcode to fix Side Channel vulnerability for Windows Embedded operating system 19 17 In the Choose image to push to this device section, select the local BIOS from the list, and click OK. The BIOS push operation starts, and the overall status is displayed in the progress bar. 18 After the BIOS push operation is complete, remove the USB drive from the target device. The Wyse 5060 thin client restarts automatically after BIOS push operation is complete. 20 BIOS add-on with AMD microcode to fix Side Channel vulnerability for Windows Embedded operating system 5 Intel Bluetooth Pairing Vulnerability Fixes Add-on Release type and definition This release notes contains information about the Intel bluetooth add-on for Wyse 5060 thin client, Latitude E7270 mobile thin client, Latitude 3460 mobile thin client, and Latitude 5280 mobile thin client. This add-on addresses the security vulnerability issue Bluetooth Pairing (INTEL-SA-00128). Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system. Support matrix Table 8. Support matrix Platform Operating system Wyse 5060 thin client Windows 10 IoT Enterprise Latitude 5280 mobile Windows 10 IoT Enterprise thin client Wyse 5060 thin client Windows Embedded Standard 7P Latitude 3460 mobile Windows Embedded Standard 7P thin client Latitude E7270 mobile Windows Embedded Standard 7P thin client Flash/SSD Size 32 GB /64 GB 128 GB SSD 32 GB /64 GB 128 GB SSD 128 GB SSD RAM Size 4 GB /8 GB 8 GB 4 GB /8 GB 8 GB 8 GB Build number 5060_0A71_32GB 5280_0A73_32GB 5060_7067_32GB 3460_7065_128GB E7270_7065_128GB Table 9. Management Server details Management Server Wyse Device Manager Wyse Management Suite Microsoft System Center Configuration Manager Version 5.7.3 1.3 Microsoft System Center Configuration Manager 2016 Version 1606 Console Version--5.0.8412.1313 Site version--5.0.8412.1000 Intel Bluetooth Pairing Vulnerability Fixes Add-on 21 Version information and components name Table 10. Version information Locations Old driver version Windows 10 IoT Enterprise 5060 Dell Thin Client - 20.40.0 Installed Products Device Manager 20.40.0.3 Control Panel Programs and Features 20.40.0 5280 19.60.0 19.60.0.3 19.60.0 Windows Embedded Standard 7P E7270/3460 5060 19.0.1603.0650 19.0.1601.0594 New driver version Windows 10 IoT Windows Enterprise Embedded Standard 7P 5060/5280 E7270/3460/50 60 20.70.2 20.60.0 19.0.1603.630 19.0.1603.0650 9.0.1601.582 19.0.1601.0594 20.70.0.4 20.70.2 20.60.0.4 20.60.0 Table 11. Component name under various locations Locations Dell Thin Client - Installed Products Dell Thin Client - WDM Packages Device Manager Control Panel - Programs and Features Windows 10 IoT Enterprise and Windows Embedded Standard 7P Intel Wireless Bluetooth IntelBluetoothDriver Intel Wireless Bluetooth Intel Wireless Bluetooth ENERGY STAR specifications The product meets the ENERGY STAR requirement. On thin client running Windows 10 IoT Enterprise operating system, the following values are set by default in control panel applet of Power options: · Supports WOL power off states. · Supports idle state wake. · Screen off timer set to 10 minutes in Balanced mode, five minutes in Power saver mode, and 15 minutes in High Performance mode. · Sleep timer set to 15 minutes in Balanced mode, 15 minutes in Power saver mode, and Never in High Performance mode. On thin client running Windows Embedded Standard 7 operating system, the following values are set by default in control panel applet of Power options: · Supports WOL power off states. · Supports idle state wake. · Screen off timer set to 10 minutes in Balanced mode, five minutes in Power saver mode, and 15 minutes in High Performance mode. · Sleep timer set to 15 minutes in Balanced mode, Never in Power saver mode, and Never in High Performance mode. 22 Intel Bluetooth Pairing Vulnerability Fixes Add-on Known issues Table 12. Known issues Issue ID WS-2263 WS-2246 WS-2244 WS-2376 Issue description When you are installing or uninstalling the add-on Interactive services detection crash message window is displayed occasionally. A yellow exclamation mark is observed on Bluetooth peripheral devices in Device Manager after you connect a mobile Bluetooth device to the client. Workaround There is no impact to functionality. 1 Go to Control Panel > Devices & Printers > Devices and select the device. 2 Go to Properties > Services and clear the respective Bluetooth services. Occasionally, uninstallation of Bluetooth add-on does not clean up, even after successful job completion from management servers. There is no impact to functionality. When you pair two Bluetooth devices, Windows explorer has stopped working error message is displayed. This issue is also observed when you transfer the files using Bluetooth. There is no impact to functionality. Intel Bluetooth Pairing Vulnerability Fixes Add-on 23 6 OSComponentCleanup Add-on for Windows 10 IoT Enterprise Redstone 1 Release type and definition This release contains information about the OSComponentCleanup add-on for Windows 10 IoT Enterprise Redstone 1. This add-on increases free space by optimizing the disk space on thin clients that run Windows 10 IoT Enterprise. This OSComponentCleanup add-on is supported on the thin clients with 32 GB or a higher disk configuration. The OSComponentCleanup add-on clears all the overridden operating system components that are accumulated during the installation of Microsoft security updates. Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Support matrix Table 13. Supported platforms Platform Wyse 5060 thin client Wyse 5070 thin client Wyse 5280 mobile thin client Wyse 3480 mobile thin client Memory configuration 500 GB/128 GB/256 GB, 8 GB/4 GB RAM 128 GB/64 GB SSD/32GB eMMC, 8 GB/4 GB RAM 128-GB M2 SSD, 8-GB RAM 128-GB M2 SSD, 8-GB RAM Build number 0A60/0A71 10.03.06.05.18.01 0A73 0A72 Table 14. Add-on details OSComponentCleanup add-on File name File size OSComponentCleanup.msi 679,424 bytes Installing add-on manually Follow these steps to install the add-on manually: 1 Go to support.dell.com. 2 Click Product Support, enter the Service Tag of your thin client, and then click Submit. NOTE: If you do not have Service Tag, manually browse for your thin client model. 24 OSComponentCleanup Add-on for Windows 10 IoT Enterprise Redstone 1 3 Click Drivers and Downloads. 4 From the Operating system drop-down menu, select the appropriate operating system. 5 Scroll down the page and download the OSComponentCleanup.msi file. 6 Log in as an administrator and disable UWF. 7 Copy the downloaded OSComponentCleanup.msi file to C:\Temp folder. 8 Double-click the OSComponentCleanup.msi file and follow the on-screen instructions. 9 Click Finish and enable UWF. Known issues Table 15. Known issues Issue number Issue description WS-852 Installation progress bar displays Completed before running the DISM command. Workaround There is no workaround in this release. Important notes · When you install the OSComponentCleanup add-on for the first time, it may take 1-3 hours to finish the component clean-up. However, it may take 30-60 minutes to complete the component clean-up process when you again install the OSComponentCleanup add-on. · The OSComponentCleanup add-on can be used by the Wyse Management Suite administrator with Pro license to trigger the clean-up process after every monthly cumulative update as part of the Post install option in Advanced App Policy. · Recurring schedule for clean-up process can be created in Wyse Management Suite to avoid manual intervention by the Wyse Management Suite administrator. OSComponentCleanup Add-on for Windows 10 IoT Enterprise Redstone 1 25 7 Language Control Add-on Version 2.1 for Windows Embedded Standard with Multi-lingual User Interface Release type and definition This release note contains information for deploying the unified multilingual user interface image on top of nonunified image with language meta data in the merlin partition. Imaging the client brings up the unit in the same multilingual user interface language present in merlin. Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Supported platforms Table 16. Supported platforms Operating system Windows 10 IoT Enterprise Windows Embedded Standard 7 Professional Windows Embedded Standard 7 Platform Latitude 3460 mobile thin client Wyse 5020 thin client Wyse 5060 thin client Latitude 5280 mobile thin client Wyse 7020 thin client Wyse 7020 accelerated graphics thin client Wyse 7040 thin client Latitude 3460 mobile thin client Wyse 5020 thin client Wyse 5060 thin client Wyse 7020 thin client Wyse 7020 thin client with accelerated graphics Wyse 7040 thin client Latitude E7270 mobile thin client Wyse 3030 thin client Wyse 5010 thin client 26 Language Control Add-on Version 2.1 for Windows Embedded Standard with Multi-lingual User Interface Operating system New feature Platform Wyse 5020 thin client Wyse 7010 extended chassis thin client Wyse 7010 thin client Wyse 7020 thin client The new feature in this release is: LanguageControl_2.1.exe--It writes language meta data to the merlin partition. Following are the language meta data for different languages: · En-US (English-United States) · De-DE (German-Germany) · Fr-CA (French-Canada) · Ja-JP (Japanese-Japan) · Es-ES (Spanish-Spain) · Fr-FR (French-France) · It-IT (Italian-Italy) · Ko-KR (Korean-Korea) · Zh-CN (Chinese-Simplified) · Zh-TW (Chinese-Traditional) · Pt-BR (Portuguese-Brazil) You should uncomment by removing the semicolon at the beginning of an EX command in the WDM rsp script. For example, write de-DE (German-Germany) to merlin partition, uncomment de-DE and comment the other EX commands in rsp script. EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language de-DE" "+ ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language en-US" "+" ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language es-ES" "+" ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language fr-CA" "+" ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language fr-FR" "+" ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language it-IT" "+" ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language ja-JP" "+" Language Control Add-on Version 2.1 for Windows Embedded Standard with Multi-lingual User Interface 27 ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language ko-KR" "+" ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language zh-CN" "+" ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language zh-TW" "+" ; EX "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" "C:\Windows\Setup\Tools\MUI\LanguageConfig.ps1 -Language pt-BR" "+" NOTE: You must uncomment only one EX command before deploying the package Add-on details Table 17. Add-on details Add-on name LanguageControl_2.1.exe Add-on package details Size in bytes 122,880 · This package writes the language meta data to the merlin partition. · This package deploys Windows Embedded Standard builds. · The system restarts twice while deploying the package. · Minimum free space required to install the package is 5 MB. Energy Star test Thin client meets the ENERGY STAR version 6.0 requirements. Following are the values that are displayed in control panel applet of power options: · Supports WOL power off states. · Supports idle state wake. · Screen off timer is set to 10 minutes. · Sleep timer is set to 15 minutes. 28 Language Control Add-on Version 2.1 for Windows Embedded Standard with Multi-lingual User Interface 8 CADMAP updates for Dell Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise Release type and definition This release note contains information about the CADMAP tool update for Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise Redstone 1 image. These add-ons enable Win+L and Ctrl+Alt+Delete key to function in the remote session such as Remote Desktop, Citrix, and VMware sessions. Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Support matrix Table 18. Support matrix Platform name Operating system Add-on file name Add-on file size Wyse 5060 Windows 10 IoT Enterprise CAD_MAP_VDI_WIE1 5,127,680 bytes thin client 0_64bit.msi Wyse 5070 thin client RAM size 4 GB/8 GB 4 GB/8 GB Flash size 32 GB/64 GB 128 GB/64 GB SSD/32 GB eMMC Build number 0A60/0A71 10.03.06.05.1 8.01 Table 19. Management server details Management Server Wyse Device Manager Wyse Management Suite Microsoft System Center Configuration Manager Version 5.7.3 1.2 Microsoft System Center Configuration Manager 2016 Version 1606 Console Version-5.0.8412.1313 Site version-5.0.8412.1000 CADMAP updates for Dell Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise 29 Known issues Table 20. Known issues Issue number WC-739 Known issues Workaround Win+L key is not working inside the VMware session when connected with RDP There is no workaround for the protocol in Window mode. issue. WC-816 Temp folder is not deleted after you push the CAD_MAP_VDI_WIE10_64bit.msi There is no workaround for the add-on using WDM. issue. 30 CADMAP updates for Dell Wyse 5060 thin client and Wyse 5070 thin client with Windows 10 IoT Enterprise 9 Language Control Application version 1.0.0 Addon Release type and definition Intel Bluetooth 8265 and Intel Wireless 8265 add-on package for thin clients that run Windows 10 IoT Enterprise Windows Embedded Standard 7P, and Windows 10 IoT Enterprise operating system. You can install this package by using Wyse Device Manager, Wyse Management Suite, and System Center Configuration Manager. Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Supported platforms Table 21. Windows 10 IoT Enterprise Platforms Flash size Dell Wyse 5020 thin client 32 GB Dell Wyse 7020 thin client 32 GB Dell Wyse 7020 accelerated graphics thin client 32 GB RAM size 4 GB 4 GB 4 GB Build number GOG0_0A79_32GB.exe GOG0_0A79_32GB.exe GOG0_0A79_32GB.exe Table 22. Windows Embedded Standard 7P Platforms Flash size Dell Wyse 5020 thin client 16 GB Dell Wyse 7020 thin client 16 GB Dell Wyse 7020 accelerated graphics thin client Dell Wyse 7010 thin client 16 GB 16 GB RAM size 4 GB 4 GB 4 GB 4 GB Build number BOB0_7066_16GB.exe BOB0_7065_16GB.exe BOB0_7066_16GB.exe BOB0_7065_16GB.exe BOB0_7066_16GB.exe BOB0_7065_16GB.exe BZB0_0896_16GB.exe Language Control Application version 1.0.0 Add-on 31 Table 23. Windows Embedded Standard 7 Platforms Dell Wyse 3030 thin client Flash size 16 GB Dell Wyse 5010 thin client 16 GB Dell Wyse 5020 thin client 16 GB Dell Wyse 7010 thin client 16 GB Wyse 7010 Extended thin client 16 GB Dell Wyse 7020 thin client 16 GB RAM size 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB Supported management software Build number BEB0_7077_16GB.exe BDB0_7064_16GB.exe BOB0_7064_16GB.exe BZB0_7064_16GB.exe BZB0_7064_16GB.exe BOB0_7064_16GB.exe Table 24. Supported management software Management software Wyse Device Manager Wyse Management Suite System Center Configuration Manager Version 5.7.3 1.3 2016 Microsoft System Center Configuration Manager Version 1606 Console Version--5.0.8412.1313 Site version--5.0.8412.1000 Add-on package details · Package name: Intel_Bluetooth_8265.exe This package installs Intel_Bluetooth_8265 on Windows 10 IoT Enterprise, Windows Embedded Standard 7P, and Windows Embedded Standard 7 builds. The system restarts twice during the installation. Minimum free disk space required to install this package is 2 GB. · Package name: Intel_Wireless_8265.exe This package installs Intel_Wireless_8265 on Windows 10 IoT Enterprise, Windows Embedded Standard 7P, and Windows Embedded Standard 7 builds. The system restarts twice during the installation. Minimum free disk space required to install this package is 2 GB. 32 Language Control Application version 1.0.0 Add-on 10 Write Filter update for Windows Embedded Standard 7 Operating System Release type and definition This release note contains information about the Windows Writefilter_Update add-on for Windows Embedded Standard 7E and Windows Embedded Standard 7P images. This update addresses the following CIRs: · CIR92178 · CIR92116 CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times. Such instructions include making sure that the write filter is enabled during regular use and is disabled only temporarily by an administrator when required for image upgrades, applying security patches, registry changes and application installation. The write filter should be re-enabled as soon as such tasks are completed. Such instructions further include never enabling the Windows Page File feature during regular use of the thin client. Any operation of a Dell Wyse Windows Embedded Thin Client with the write filter turned off during regular use and/or with the Windows Page file enabled will prematurely wear out your Flash/SSD storage, decrease performance and decrease the lifespan of the product. Dell is not responsible for, and will not, warrant, support, repair or replace any thin client device or component that fails to operate properly due to a failure to follow these instructions. Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Supported platforms Table 25. Supported Platforms Platform Wyse 3030 thin client with WES7E Wyse 5010 thin client with WES7E Wyse 5020 thin client with WES7E Wyse 5020 thin client with WES7P Wyse 7010 thin client with WES7E Wyse 7010 thin client with WES7--Extended Wyse 7020 thin client with WES7E Wyse 7020 thin client with WES7P Wyse 7020 thin client with WES7P--Extended Wyse 7040 thin client with WES7P Build number 7077 7064 7064 7066 7064 7064 7064 7066 7066 7065 Language en-US en-US en-US en-US en-US en-US en-US en-US en-US en-US Write Filter update for Windows Embedded Standard 7 Operating System 33 Platform Wyse 5060 thin client with WES7P Build number 7067 Installing the add-on manually Language en-US You can install the add-on manually. 1 Log into the thin client as administrator and disable the File-Based Write Filter option. 2 Copy the WriteFilter_UpdateWES7E.msi or WriteFilter_UpdateWES7P.msi add-on to C:\Temp folder. 3 Double-click the WriteFilter_UpdateWES7E.msi or WriteFilter_UpdateWES7P.msi file and follow the instructions displayed on the screen. 4 Click Finish. The add-on is installed on the thin client. Known issues Table 26. Known issues Summary Workaround The UWF icon in the taskbar should be red in color when the caution message is displayed. There is no workaround for the issue in this release. When UWF is disabled using the shortcut icon on the desktop, the legal There is no workaround for the issue in this release. message is not displayed. Build information Table 27. Windows Embedded Standard 7E Build filename Version WriteFilter_UpdateWES7E.msi 1.0.2.4 Build size 2.75 MB Table 28. Windows Embedded Standard 7P Build filename Version WriteFilter_UpdateWES7P.msi 1.0.2.4 Build size 2.75 MB NOTE: Note: WriteFilter_UpdateWES7E.msi can not be installed on Windows Embedded Standard 7P hardware. Important notes This add-on displays a warning message when you disable the write filter using the write filter system tray. It also provides reminder to users with a pop-up that the write filter is disabled. 34 Write Filter update for Windows Embedded Standard 7 Operating System 11 Unified Write Filter RAMDisk Size add-on for Microsoft Windows 10 IoT Enterprise Release type and definition This release note contains information about the UWF RAMDisk Size add-on for Windows 10 IoT Enterprise Threshold and Red stone images. NOTE: The UWF RAMDisk Size application sets the UWF cache size and RAMDisk size. CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times. Such instructions include making sure that the write filter is enabled during regular use and is disabled only temporarily by an administrator when required for image upgrades, applying security patches, registry changes and application installation. The write filter should be re-enabled as soon as such tasks are completed. Such instructions further include never enabling the Windows Page File feature during regular use of the thin client. Any operation of a Dell Wyse Windows Embedded Thin Client with the write filter turned off during regular use and/or with the Windows Page file enabled will prematurely wear out your Flash/SSD storage, decrease performance and decrease the lifespan of the product. Dell is not responsible for, and will not, warrant, support, repair or replace any thin client device or component that fails to operate properly due to a failure to follow these instructions. Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Support matrix Table 29. Supported platforms Platform Wyse 3480 mobile thin client Ram size 8 GB Wyse 5280 mobile thin client 8 GB Wyse 5060 thin client 4 GB/ 8 GB Wyse 7040 thin client 4 GB/ 8 GB/ 16 GB Build information Flash size 500 GB/ 128 GB/ 256 GB 500 GB/ 128 GB/ 256 GB 500 GB/ 128 GB/ 256 GB 500 GB/ 128 GB/ 256 GB Build number 0A63 0A64 0A60 0A62 Table 30. Build information Build file name UWF_RAMDisk_Size.msi Build Size 3,406,336 bytes Unified Write Filter RAMDisk Size add-on for Microsoft Windows 10 IoT Enterprise 35 Installing add-on manually 1 Log in as an administrator and disable the write filter. 2 Create a temp folder in <drive C>. 3 Copy the UWF_RAMDisk_Size.msi file to the temp folder. 4 Double-click the UWF_RAMDisk_Size.msi file, and follow the on-screen instructions. 5 Click Finish to exit the installer. 6 Reboot the thin client. Important notes When the write filter is enabled, · UWF cache size for thin clients with 8 GB RAM is set to 2 GB, and RAMDisk size is set to 512 MB. · UWF cache size for thin clients with 4 GB RAM is set to 1 GB, and RAMDisk size is set to 100 MB. NOTE: When write filter is disabled, RAMDisk size is set to 512 MB for both 8 GB and 4 GB RAM thin clients. 36 Unified Write Filter RAMDisk Size add-on for Microsoft Windows 10 IoT Enterprise 12 Custom Field Thin Client Application add-on for Microsoft Windows 10 IoT Enterprise Release type and definition This release note contains information about the Custom_Field_Thin_Client_Application add-on for Windows 10 IoT Enterprise Threshold and Redstone 1 images. CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times. Such instructions include making sure that the write filter is enabled during regular use and is disabled only temporarily by an administrator when required for image upgrades, applying security patches, registry changes and application installation. The write filter should be re-enabled as soon as such tasks are completed. Such instructions further include never enabling the Windows Page File feature during regular use of the thin client. Any operation of a Dell Wyse Windows Embedded Thin Client with the write filter turned off during regular use and/or with the Windows Page file enabled will prematurely wear out your Flash/SSD storage, decrease performance and decrease the lifespan of the product. Dell is not responsible for, and will not, warrant, support, repair or replace any thin client device or component that fails to operate properly due to a failure to follow these instructions. Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system. Support matrix Table 31. Supported platforms Platform Wyse 3480 mobile thin client RAM size 8 GB Wyse 5280 mobile thin client 8 GB Wyse 5060 thin client 4 GB/8 GB Wyse 7040 thin client 4 GB/8 GB/16 GB Memory size 128 GB/256 GB--SSD 128 GB/256 GB--SSD 32 GB/64 GB--SSD 128 GB--SSD 256 GB--SED 500 GB--HDD Build number 0A63 0A64 0A60 0A62 Custom Field Thin Client Application add-on for Microsoft Windows 10 IoT Enterprise 37 Build information Table 32. Build information Component Build filename Version Build size Description Custom_Field_Thin_Client_Application.msi 10.0.0.14 4,287,488 bytes License information This section contains the license information for Newtonsoft.Json.dll 6.0.3.17227 component. The MIT License (MIT) Copyright (c) 2007 James Newton-King Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 38 Custom Field Thin Client Application add-on for Microsoft Windows 10 IoT Enterprise 13 Write Filter update for Windows 10 IoT Enterprise Threshold and Redstone Operating System Release type and definition This release note contains information about the Windows Writefilter_Update add-on for Windows 10 IoT Enterprise Threshold and Red stone images. This update addresses the following CIRs: · CIR92178 · CIR92116 CAUTION: Please follow proper write filter and Windows Page File usage instructions at all times. Such instructions include making sure that the write filter is enabled during regular use and is disabled only temporarily by an administrator when required for image upgrades, applying security patches, registry changes and application installation. The write filter should be re-enabled as soon as such tasks are completed. Such instructions further include never enabling the Windows Page File feature during regular use of the thin client. Any operation of a Dell Wyse Windows Embedded Thin Client with the write filter turned off during regular use and/or with the Windows Page file enabled will prematurely wear out your Flash/SSD storage, decrease performance and decrease the lifespan of the product. Dell is not responsible for, and will not, warrant, support, repair or replace any thin client device or component that fails to operate properly due to a failure to follow these instructions. Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Supported platforms Table 33. Supported platforms Platform name Latitude 3480 mobile thin client Latitude 5280 mobile thin client Wyse 7020 thin client with Win10 IoT--Z90Q10 Wyse 5020 thin client with Win10 IoT--D90Q10 Wyse 5060 thin client with Win10 IoT Wyse 7040 thin client with Win10 IoT Wyse 7020 thin client Win10 IoT--Z90QQ10 Memory configuration (RAM/flash) 500 GB/128 GB/256 GB/8 GB 500 GB/128 GB/256 GB/8 GB 32 GB/4 GB 32 GB/4 GB 500 GB/128 GB/256 GB/16 GB/8 GB/4 GB 500 GB/128 GB/256 GB/16 GB/8 GB/4 GB 32 GB/4 GB Build number 0A63 0A64 0A62 0A62 0A60 0A62 0A62 Write Filter update for Windows 10 IoT Enterprise Threshold and Redstone Operating System 39 Build information Table 34. WriteFilter_Update.msi Build file name WriteFilter_Update.msi Version 1.0.4.11 Known issues Build size 3,180,544 bytes Table 35. Known issues Known issues The UWF icon in the taskbar should be red in color when the caution message is displayed. When UWF is disabled using the shortcut icon on the desktop, the legal message is not displayed. Workaround There is no workaround for the issue in this release. There is no workaround for the issue in this release. Fixed issues · After installing the add-on manually, the UWF icon is not displayed in the systray. · Text in legal message window is cropped in monitor model-U2515H in all the screen resolutions. · In the installer window, a message pertaining to current version of the add-on installed on thin client is not displayed. · The add-on is digitally not signed. 40 Write Filter update for Windows 10 IoT Enterprise Threshold and Redstone Operating System 14 Windows Embedded Standard Security Update to Mitigate Meltdown and Spectre Vulnerability Release type and definition This release note contains information about the Windows Embedded Standard security updates to mitigate meltdown and spectre vulnerabilities on the following operating systems: · Windows Embedded Standard 7 · Windows Embedded Standard 7P · Windows Embedded Standard 8 · Windows 10 IoT Enterprise Speculative execution of meltdown and spectre vulnerabilities can be used to read the memory across a trusted boundary. There are multiple vectors by which an attacker can trigger the vulnerabilities depending upon your configuration. This security update is to mitigate the meltdown and spectre vulnerability which prevent attackers from triggering a weakness in the CPU and access the content stored in memory. For more information, see knowledge base article Meltdown and Spectre Vulnerabilities at www.dell.com Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system. What is new in this release · KB4056897_WES7-- This file installs January 2018 security quality update for Windows Embedded Standard 7 on a 32-bit system. Your system reboots three times during the installation and requires 150 MB of free space. For more information, see KB article no 4056897 at support.dell.com · IE11_KB4056568_WES7--This file installs January 2018 cumulative security update for Internet Explorer 11 for Windows Embedded Standard 7 on a 32-bit system. Your system reboots three times during the installation and requires 140 MB of free space. For more information, see KB article no 4056568 at support.microsoft.com · KB4056897_WES7P--This file installs January 2018 security quality update for Windows Embedded Standard 7 on a 64-bit systems. Your system reboots three times during the installation and requires 335 MB of free space. For more information, see KB article no 4056897 at support.microsoft.com · IE11_KB4056568_WES7P--This file installs January 2018 cumulative security update for Internet Explorer 11 for Windows Embedded Standard 7 on a 64-bit system. Your system reboots three times during the installation and requires 335 MB of free space. For more information, see KB article no 4056568 at support.microsoft.com · KB4056899_WE8S--This file installs January 2018 security quality update for Windows Embedded 8 Standard on a 64-bit systems. Your system reboots three times during the installation and requires 100 MB of free space. For more information, see KB article no 4056899 at support.microsoft.com · KB4056893_WIE10--This file installs January 2018 cumulative update for Windows 10 IoT Enterprise version 1507 on a 64-bit systems. Your system reboots three times during the installation and requires 4.5 GB of free space. For more information, see KB article no 4056893 at support.microsoft.com · KB4056890_WIE10_1607--This file installs January 2018 cumulative update for Windows 10 IoT Enterprise version 1607 on a 64-bit systems. Your system reboots three times during the installation and requires 6 GB of free space. For more information, see KB article no 4056890 at support.microsoft.com Windows Embedded Standard Security Update to Mitigate Meltdown and Spectre Vulnerability 41 Test environment Table 36. Supported Windows Embedded Standard 7 platforms Platform name Wyse 3030 thin client Memory configuration 16 GB flash/4 GB RAM Wyse 5010 thin client 16 GB flash/4 GB RAM Wyse 5020 thin client 16 GB flash/4 GB RAM Wyse 7010 thin client 16 GB flash/4 GB RAM Wyse 7010 Extended thin client 16 GB flash/4 GB RAM Wyse 7020 thin client 16 GB flash/4 GB RAM Table 37. Supported Windows Embedded Standard 7P platforms Platform name Memory configuration Wyse 5020 thin client 16 GB flash/4 GB RAM Wyse 7020 thin client 16 GB flash/4 GB RAM Wyse 7020 Extended thin client 16 GB flash/4 GB RAM Table 38. Supported Windows Embedded Standard 7P platforms Platform name Latitude 3460 mobile thin client Memory configuration 128 GB SSD flash/8 GB RAM Wyse 5060 thin client 64 GB SSD flash/8 GB RAM Wyse 7040 thin client 128 GB SSD flash/8 GB RAM Latitude E7270 mobile thin client 128 GB SSD flash/8 GB RAM Table 39. Supported Windows Embedded 8 Standard platforms Platform name Wyse 5010 thin client Memory configuration 16 GB flash/4 GB RAM Wyse 5020 thin client 16 GB flash/4 GB RAM Wyse 7010 thin client 16 GB flash/4 GB RAM Wyse 7020 thin client 16 GB flash/4 GB RAM Table 40. Supported Windows 10 IoT Enterprise platforms (1607 Redstone) Platform name Wyse 5060 thin client Memory configuration 64 GB flash/4 GB RAM Latitude 3480 mobile thin client 128 GB flash/8 GB RAM Latitude 5280 mobile thin client 128 GB flash/8 GB RAM Build number 9.09 build 7064 9.09 build 7064 9.09 build 7064 9.09 build 7064 9.09 build 7064 9.09 build 7064 Build number 9.09 build 7065/7066 9.09 build 7065/7066 9.09 build 7065/7066 Build number 9.09 build 7065 9.09 build 7067 9.09 build 7065 9.09 build 7065 Build number 10.03 build 924 10.03 build 924 10.03 build 924 10.03 build 924 Build number 12.00 build 0A60 12.01 build 0A64 12.01 build 0A63 42 Windows Embedded Standard Security Update to Mitigate Meltdown and Spectre Vulnerability Table 41. Supported Windows 10 IoT Enterprise platforms (1507 Threshold) Platform name Wyse 5020 thin client Memory configuration 32 GB flash/4 GB RAM Wyse 7020 thin client 32 GB flash/4 GB RAM Wyse 7020 Extended thin client 32 GB flash/4 GB RAM Wyse 7040 thin client 256 GB SSD/4 GB RAM Dependencies Build number 11.03 build 0A62 11.03 build 0A62 11.03 build 0A62 11.03 build 0A62 Ensure that you update Wyse Device Agent or HAgent to the latest version on the client before you proceed with the security updates through Wyse Device Manager version 5.7.2 or Wyse Management Suite version 1.1. Security update details Table 42. Security update details File name KB4056897_WES7.exe IE11_KB4056568_WES7.exe KB4056897_WES7P.exe IE11_KB4056568_WES7P.exe KB4056899_WE8S.exe KB4056893_WIE10.exe KB4056890_WIE10_1607.exe Energy Star test File size in bytes 38,043,648 30,212,096 70,340,608 55,209,984 20,717,568 938,627,072 1,261,240,320 The following values are displayed by default in the control panel applet of Power Options: · Supports WOL Power off states. · Supports Idle State wake. · Screen off timer is set to 15 minutes. · Sleep timer is set to 20 minutes. Windows Embedded Standard Security Update to Mitigate Meltdown and Spectre Vulnerability 43 15 WPA2 Security Vulnerability Add-on Release type and definition This release signifies WPA2 Security Vulnerability for the Windows-based thin clients. For information about the supported platforms, see Supported platforms As with any technology, robust security research that pre-emptively identifies potential vulnerabilities is critical in providing strong protection. This issue can be resolved through simple software updates. In the Wi-Fi industry, you can expect all your Wi-Fi devices to continue to work together by deploying WPA2 add-on to all the Wi-Fi supported devices. Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system. Supported platforms Table 43. Windows Embedded Standard 7 Platform name Wyse 3030 thin client-3290 Wyse 5010 thin client with WES7-D90D7 Wyse 7010 thin client with WES7-Z90D7 Wyse 5020 thin client with WES7-D90Q7 Wyse 7020 thin client with WES7-Z90Q7 Build BEB0_7064_16GB.exe BDB0_7064_16GB.exe BZB0_7064_16GB.exe BOB0_7064_16GB.exe BOB0_7064_16GB.exe Add-on name IntelWiFiDriver.exe IntelWiFiDriver.exe IntelWiFiDriver.exe IntelWiFiDriver.exe IntelWiFiDriver.exe Table 44. Windows Embedded Standard 7 Professional Platform name Wyse 5020 thin Client with WES7PD90Q7P Build BOB0_7065_16GB.exe, European Build Wyse 7020 thin Client with WES7PZ90Q7P BOB0_7065_16GB.exe, European Build Wyse 7020 Accelerated Graphics thin client BOB0_7065_16GB.exe, European Build with WES7P-Z90QQ7P Wyse 5020 thin client with WES7PD90Q7P BOB0_7066_16GB.exe, Asian Build Wyse 7020 thin client with WES7PZ90Q7P BOB0_7066_16GB.exe, Asian Build Wyse 7020 Accelerated Graphics thin client BOB0_7066_16GB.exe, Asian Build with WES7P-Z90QQ7P Add-on name IntelWiFiDriver.exe IntelWiFiDriver.exe IntelWiFiDriver.exe IntelWiFiDriver.exe IntelWiFiDriver.exe IntelWiFiDriver.exe 44 WPA2 Security Vulnerability Add-on Platform name D90D7P Z90D7P Wyse 5060 thin client with WES7P Latitude E7270 mobile thin client with WES7P Latitude 3460 mobile thin client with WES7P Build BDB0_0896_16GB.exe BZB0_0896_16GB.exe 5060_7067_32GB.exe E7270_7065_128GB.exe 3460_7065_128GB.exe Add-on name IntelWiFiDriver.exe IntelWiFiDriver.exe IntelWiFiDriver_5060.exe IntelWiFiDriver_E7270_3460.exe IntelWiFiDriver_E7270_3460.exe Table 45. Windows 10 IoT Enterprise Threshold Platform name Build Wyse 7020 thin client with Win10 IoTZ90Q10 GOG0_0A62_32GB.exe Wyse 7020 Accelerated Graphics thin client GOG0_0A62_32GB.exe with Win10 IoT-Z90QQ10 Wyse 5020 thin client with Win10 IoTD90Q10 GOG0_0A62_32GB.exe Add-on name IntelWiFiDriver.exe IntelWiFiDriver.exe IntelWiFiDriver.exe Table 46. Windows 10 IoT Enterprise RedStone Platform name Wyse 5060 thin client with Win10 IoT Build 5060_0A60_32GB.exe Latitude 5280 mobile thin client with Win10 5280_0A64_32GB.exe IoT Latitude 3480 mobile thin client with Win10 3480_0A63_32GB.exe IoT Add-on name IntelWiFiDriver_5060.exe IntelWiFiDriver_5280.exe QualcommWiFiDriver_3480.exe Table 47. Management server Management server Wyse Device Manager (WDM) Wyse Management Suite (WMS) System Center Configuration Manager (SCCM) Current version Version 5.7.2 1.1 2016 Microsoft System Center Configuration Manager Version 1606 Console version: 5.0.8412.1313 Site version: 5.0.8412.1000 Operating System Windows Server 2012 R2 Windows Server 2012 R2 Windows Server 2016 version 1607Operating systems build 14393.1715 Table 48. Current version Sl.no 1 2 3 Add-ons IntelWiFiDriver.exe IntelWiFiDriver_5060.exe IntelWiFiDriver_E7270_3460.exe Driver version 18.33.9.3 19.10.9.2 19.10.10.2 WPA2 Security Vulnerability Add-on 45 Sl.no 4 5 Known issues Add-ons IntelWiFiDriver_5280.exe QualcommWiFiDriver_3480.exe Driver version 20.10.1.3 12.0.0.448 Table 49. Known issues Known issues Workaround Wireless connection is disconnected. SSID is removed from the NA saved wireless list in the thin client when you try to unregister the thin client from the WMS server. Wyse Device Manager: C:\Temp is not deleted, and the lock screen Edit the .rsp manually in the server side with DT command to delete is not available when you push from Wyse Device Manager. C:\Temp and enable lock screen with LU and EL. SCCM: C:\Temp is not deleted. NA Intel WiFi Driver add-on deployment from the SCCM server fails while deploying the add-on using task sequence. Deploy the add-on without task sequence. Note : An error on the server side is present. Network adapter details Table 50. Network adapter Add-on name IntelWiFiDriver.exe IntelWiFiDriver_5060.exe IntelWiFiDriver_E7270_3460.exe IntelWiFiDriver_5280.exe QualcommWiFiDriver_3480.exe Network adapter Intel Dual Band Wireless-AC 7260 driver Intel Dual Band Wireless-AC 7265 driver Intel Dual Band Wireless-AC 3165 driver Intel Dual Band Wireless-AC 8265 driver Qualcomm QCA61x4A 802.11ac wireless Adapter Driver version 18.33.9.3 19.10.9.2 19.10.10.2 20.10.1.3 12.0.0.448 Parameters to install WPA2 driver add-on Table 51. Parameters Platforms Latitude E7270 mobile thin client with WES7P Latitude 3460 mobile thin client with WES7P Latitude 5280 mobile thin client with Win10 IoT Wyse 5060 thin client Latitude 3480 mobile thin client Win10 IoT Other platforms .exe file IntelWiFiDriver_E7270_3460.EXE IntelWiFiDriver_5280.EXE IntelWiFiDriver_5060.EXE QualcommWiFiDriver_3480.exe IntelWiFiDriver.exe Command parameters /s /s --silent /s --silent 46 WPA2 Security Vulnerability Add-on Add-on information Table 52. Add-on information Components Platforms Add-on name Type of file Size Driver version Language Table 53. Add-on information for Wyse 5060 thin client Components Platforms Add-on name Type of file Size Support information Wyse 3030 thin client--3290 Wyse 5010 thin client with WES7--D90D7 Wyse 5020 thin client with WES7--D90Q7 Wyse 7010 thin client with WES7--Z90D7 Wyse 7020 thin client with WES7--Z90Q7 Wyse 5020 thin client with WES7P--D90Q7P (European Build) Wyse 7020 thin client with WES7P--Z90Q7P (European Build) Wyse 7020 Accelerated Graphics thin client with WES7P-- Z90QQ7P (European Build) Wyse 5020 thin client with WES7P--D90Q7P (Asian Build) Wyse 7020 thin client with WES7P--Z90Q7P (Asian Build) Wyse 7020 Accelerated Graphics thin client with WES7P-- Z90QQ7P (Asian Build) D90D7P Z90D7P Wyse 5020 thin client with Win10 IoT--D90Q10 Wyse 7020 thin client with Win10 IoT--Z90Q10 Wyse 7020 thin client with Accelerated Graphics with Win10 IoT-- Z90QQ10 IntelWiFiDriver.exe Application (.exe) 216 MB-2273,30,296 bytes 18.33.9.3 English-United States Support information Wyse 5060 thin client with WES7P Wyse 5060 thin client with Win10 IoT IntelWiFiDriver_5060.exe Application (.exe) 216 MB-2273,47,672 bytes WPA2 Security Vulnerability Add-on 47 Components Driver version Language Support information 19.10.9.2 English-United States Table 54. Add-on information for Latitude E7270 mobile thin client and Latitude 3460 mobile thin client Components Platforms Support information Latitude E7270 mobile thin client with WES7P Latitude 3460 mobile thin client with WES7P Add-on Name Type of file Size Driver version Language IntelWiFiDriver_E7270_3460.exe Application (.exe) 149 MB-1572,77,576 bytes 19.10.10.2 English-United States Table 55. Add-on information for Latitude 5280 mobile thin client Components Support information Platforms Latitude 5280 mobile thin client with Win10 IoT Add-on Name IntelWiFiDriver_5280.exe Type of file Application (.exe) Size 149 MB-1572,74,016 bytes Driver version 20.10.1.3 Language English-United States Important notes Table 56. Additional information Sl.no 1 2 3 4 5 6 7 Platform Wyse 3030 thin client-3290 Wyse 5010 thin client with WES7D90D7 Wyse 7010 thin client with WES7Z90D7 Wyse 5020 thin client with WES7D90Q7 Wyse 7020 thin client with WES7Z90Q7 Wyse 5020 thin client with WES7PD90Q7P (European build) Wyse 7020 thin client with WES7PZ90Q7P (European build) Information Thin client restarts twice after you push the add-on with write filter that is enabled. Minimum space that is required is 1.3 GB. 48 WPA2 Security Vulnerability Add-on Sl.no 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Platform Information Wyse 7020 Accelerated Graphics thin client with WES7P-Z90QQ7P (European build) Wyse 5020 thin client with WES7PD90Q7P (Asian build) Wyse 7020 thin client with WES7PZ90Q7P (Asian build) Wyse 7020 Accelerated Graphics thin client with WES7P-Z90QQ7P (Asian build) D90D7P Z90D7P Wyse 7020 thin client with Win10 IoTZ90Q10 Wyse 7020 Accelerated Graphics thin client with Win10 IoT-Z90QQ10 Wyse 5020 thin client with Win10 IoTD90Q10 Wyse 5060 thin client with WES7P Wyse 5060 thin client with Win10 IoT Latitude E7270 mobile thin client with WES7P Latitude 3460 mobile thin client with WES7P Latitude 5280 mobile thin client with Win10 IoT Latitude 3480 mobile thin client with Win10 IoT WPA2 Security Vulnerability Add-on 49 16 Windows Security Updates Release type and definition This release includes information about Windows Embedded security updates for Microsoft Bluetooth driver spoofing vulnerability for Dell Wyse thin client platforms. This release includes information about Windows Embedded security updates for Microsoft Bluetooth driver spoofing vulnerability for Dell Wyse thin client platforms. A spoofing vulnerability exists in the Bluetooth stack. An attacker can successfully exploit this vulnerability and perform a man-in-themiddle attack. This attack unknowingly routes traffic from your computer to an attacker-computer. The attacker can then monitor and read the traffic before sending it to the intended recipient. It is recommended to update the applicable Windows Embedded security updates as the severity of this threat is high. Priority and recommendations Urgent: Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system. Supported platforms Table 57. Supported platforms for Windows Embedded Standard 7 Platform name Memory configuration (RAM/flash) Wyse 5010 thin client 16 GB flash and 4 GB RAM Wyse 3030 thin client 16 GB flash and 4 GB RAM Wyse 7010 thin client 16 GB flash and 4 GB RAM Wyse 7010 Extended Chassis thin client 16 GB flash and 4 GB RAM Wyse 7020 thin client/ Wyse 5020 thin client 16 GB flash and 4 GB RAM WES7SP1 builds 1 09 build 7064 1 09 build 7064 1 09 build 7064 1 09 build 7064 1 09 build 7064 Table 58. Supported platforms for Windows Embedded Standard 7P Platform name Z90D7P Memory configuration (RAM/flash) 8 GB flash and 4 GB RAM Wyse 7010 Extended Chassis thin client 8 GB flash and 4 GB RAM D90D7P 16 GB flash and 4 GB RAM WES7PSP1 builds 1 04 build 896 1 04 build 896 1 04 build 896 50 Windows Security Updates Platform name Wyse 5060 thin client Memory configuration (RAM/flash) 32 GB flash and 4 GB RAM Latitude E7270 mobile thin client 128 GB SSD and 8 GB RAM Latitude 3460mobile thin client 128 GB SSD and 8 GB RAM Wyse 7020 thin client and Wyse 5020 thin 16 GB flash and 4 GB RAM client Table 59. Supported platforms for Windows 10 IoT Enterprise TH Platform name Memory configuration (RAM/flash) Wyse 5020 thin client 32 GB flash and 4 GB RAM Wyse 7020 thin client 32 GB flash and 4 GB RAM Wyse 7020 accelerated graphics thin client 32 GB flash and 4 GB RAM WES7PSP1 builds 1 07 build 7067 1 08 build 7065 1 08 build 7065 1 08 build 7066 WIE10 TH builds 1 02 build 0A38 1 02 build 0A38 1 02 build 0A38 Table 60. Supported platforms for Windows 10 IoT Enterprise RS Platform name Memory configuration (RAM/flash) Latitude 3480 mobile thin client 128 GB SSD and 8 GB RAM Latitude 5280 mobile thin client 128 GB SSD and 8 GB RAM Wyse 5060 thin client 32 GB flash and 4 GB RAM General features WIE10 RS builds 12.01 build 0A40.128GB 12.0 build 0A59.128GB 12.0 build 0A60.32 GB The security update package details are as follows: KB4038777_WES7 · This package installs 2017-09 security monthly quality rollup for Windows Embedded Standard 7 x86-based systems. For more information about KB4038777, see support.microsoft.com · This package is pushed only on Windows Embedded Standard 7 builds. · Minimum free space required to install this package is 365 MB. KB4038779_WES7 · This package installs 2017-09 security only quality update for Windows Embedded Standard 7 x86-based systems. For more information about KB4038779, see support.microsoft.com · This package is pushed only on WES7 builds. · Minimum free space required to install this package is 76 MB. KB4038777_WES7P · This package installs 2017-09 security monthly quality rollup for Windows Embedded Standard 7 x64-based systems. For more information about KB4038777, see support.microsoft.com · This package is pushed only on WES7P builds. · Minimum free space required to install this package is 595 MB. KB4038779_WES7P Windows Security Updates 51 · This package installs 2017-09 security only quality update for Windows Embedded Standard 7 x64-based systems. For more information about KB4038779, see support.microsoft.com · This package is pushed only on WES7P builds. · Minimum free space required to install this package is 126 MB. KB4038781_WIE10 · This package installs 2017-09 cumulative update for Windows 10 version 1507 for x64-based systems. For more information about KB4038781, see support.microsoft.com · This package is pushed only on WIE10 version 1507 builds. · Minimum free space required to install this package is 2618 MB. KB4038782_WIE10_1607 · This package installs 2017-09 cumulative update for Windows 10 version 1607 for x64-based systems. For more information about KB4038782, see support.microsoft.com · This package is pushed only on WIE10 version 1607 builds. · Minimum free space required to install this package is 3531 MB. Build information The platform-specific build details are as follows: Table 61. KB4038777_WES7 Build file name KB4038777_WES7.exe Build size (Bytes) 127,393,792 bytes Table 62. KB4038779_WES7 Build file name KB4038779_WES7.exe Build size (bytes) 263,98,720 bytes Table 63. KB4038777_WES7P Build file name KB4038777_WES7P.exe Build size (bytes) 208,035,840 bytes Table 64. KB4038779_WES7P Build file name KB4038779_WES7P.exe Build size (bytes) 43,921,408 bytes Table 65. KB4038781_WIE10 Build file name KB4038781_WIE10.exe Build size (bytes) 914,878,464 bytes 52 Windows Security Updates Table 66. KB4038782_WIE10_1607 Build file name KB4038782_WIE10_1607.exe Build size (bytes) 1,233,981,440 bytes Dependencies and recommendations Update to the latest WDA or HAgent on the client side before updating the security updates through WDM v5.5, v5.7, v5.7.1, and v5.7.2. Energy star test · Supports WOL Power off states · Supports Idle State wake · Screen off timer is set to 15 minutes · Sleep timer is set to 20 minutes only if the sleep timer is supported Windows Security Updates 53 17 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support Release type and definition This release supports Windows Embedded Standard 7P -- WES7P 64bit that supports Dell Wyse 5060 thin client for the Ransomware WannaCrypt susceptibility. WannaCrypt, also known as WannaCry, targets out-of-date Windows systems. This release build contains valid WES7P security updates--KB4012212 to protect your system from the ransomware WannaCrypt susceptibility. This build can be pushed on 64 GB flash and above, in combination with a 4 GB or 8 GB RAM. The WES7P v9.07 unified build 7067 supports English (en-US) and the following ten languages: · German (de-DE) · French France (fr-FR) · French Canada (fr-CA) · Italian (it-IT) · Spanish (es-ES) · Japanese (ja-JP) · Korean (ko-KR) · Chinese Simplified (zh-CN) · Chinese traditional (zh-TW) · Brazilian Portuguese (pt-BR) Priority and recommendations Recommended: Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software). Build details Table 67. General build details Component Platform Product Build version Build number Localization WSI Build details Dell Wyse 5060 thin client with WES7P WES7P 9.07 7067 English, French France, German, Italian, French Canada, Spanish, Japanese, Chinese Simplified, Chinese traditional, Korean, Portuguese Brazil 5.0.4 54 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support Component WDM BA version USB Imaging tool Build details 5.7.2 3.4.2 2.1.3 Table 68. Platform specific build details--WDM package Component Build details Version 9.07 Build number 7067 Build WSI Package Name 5060_7067_32GB.exe Build size (Bytes) 17.0 GB (18,272,322,441 bytes) Localization English, French France, German, Italian, French Canada, Spanish, Japanese, Chinese Simplified, Chinese traditional, Korean, Portuguese Brazil Table 69. BIOS details Component BIOS details Platform Dell Wyse 5060 thin client with WES7P Version 1.0F New features The new features delivered in this release are: Imaging procedure from WDM\USB environment Imaging the units from WDM\USB have the following two scenarios on top of which the unified MUI build can be pushed: · Four language unified WES7P build number 7025 · 11 language unified WES7P build number 7038 Unified build This build supports English (en-US) and ten MUI languages (fr-FR, es-ES, de-DE, it-IT, fr-CA, ja-JP, ko-KR, zh-CN, zh-TW, pt-BR). Unified MUI build As the unified MUI build has the language metadata in the Merlin partition, imaging the unified MUI build brings up the unit in the same MUI language present in Merlin. Threat defense Dell Data Protection | Threat Defense (powered by Cylance) detects and blocks malware before it can affect your computer. Cylance uses a mathematical approach for malware identification, using machine learning techniques instead of reactive signatures, trust-based systems, Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support 55 or sandboxes. Cylance's approach renders new malware, viruses, bots, and future variants useless. Dell Data Protection | Threat Defense (Threat Defense) analyzes potential file executions for malware in the operating system. General features This section contains general features of Wyse 5060 thin client running WES7P OS. Hardware support information · Rich 4K display capability · Option for wireless AC 7265 · AMD GX-424CC SOC with Radeon (TM) RSE Graphics 2.40 GHz CPU · Support for video adapters (DP to DVI, DP to VGA) in APOS manner · Dynamic Throttling for higher performance Menu driven Custom/ConfigMgr Sysprep · Supports Menu driven Custom / ConfigMgr Sysprep where you can select the particular option. · Shrinking of disk information available during Sysprep that reduces the image pull or push time in larger disks. New versions of connection brokers · VMware Horizon Client: 4.1.0.1487 · Citrix Receiver: 14.4.0.8014 Out of Box driver install All the respective device drivers have been pre-installed in the OS as compared to the legacy approach wherein there are pre-staged drivers. Newer Dell wallpapers Wyse wallpapers and themes are replaced with the Dell wallpapers and themes. XML driven PowerShell scripts Customization scripts are ported to the PowerShell scripts and based on XML file input. Logging support Logging support added for customization scripts. 56 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support Flash.sys Hostname Calculation and Preservation This option allows you to enable and disable the Hostname Calculation in flash.sys. · You can disable or enable the Hostname Calculation. · You must ensure that altering the MAC ID for a client does not perform a Host name Calculation. · Rest of the logic and flow remains the same as older flash.sys implementation. · If you require a host name calculation to perform after a change in MAC ID (NIC card change), then you must use MINWITHNET. Event Viewer log preservation This feature allows you to enable or disable Event Viewer log saving while File Based Write Filter (FBWF) is on. This feature enables you to collect event logs if they are required for debugging or analysis purposes. Dell Thin Client Application · Dell Client Application is a replacement for Client Information Application with a new User Interface (UI). · This application contains additional fields for accessing and configuring Custom Fields, RAM Disk, Auto Logon, C-A-D Map Tool, and System Shortcuts. · By default, the RAM disk size is set to 512 MB. WES7P 7067 build behavior Internet Explorer 11 · Performance enhancements: IE 11 is the quickest version of the browser yet. Microsoft has included support for web standards like CSS animations, HTML5 spell checking, and improved JavaScript performance. · Security enhancements: The main security addition to IE 11 is Enhanced Protected Mode, which locks down parts of the Windows operating system, preventing the browser from accessing the OS. IE Customizations: 1 First run customizations are disabled. 2 IE 11 enhanced protection mode is enabled. 3 Start page and default page set to www.dell.com/wyse. 4 IE Cookies and Cache are redirected to Z:. 5 Cache content to 250 MB. 6 Clears browsing history on IE exit. Citrix Receiver USB redirection always works for all users of the client machine with all the published XenDesktops, irrespective of the setting Simplify device connections for me in the XenDesktop connection preferences UI. Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support 57 Energy Star specification This product meets the ENERGY STAR version 6.0 of the thin client requirement. The following are the values by default, set in the Control Panel applet of the Power options: · Power Option when plugged-in: Supports WOL Power off states. Supports Idle State wake. Screen off timer is set to 10 minutes. Sleep timer is set to 15 minutes. Microsoft SCCM 2012 R2 information · SCCM information is not present in Programs and features and client information because of the Microsoft design. · Only Configuration Manager Control Panel Applet and SMS Agent Host Service are present. · SMSCFG.ini, clientstate.dat, wedmtrace.log, Ccmstore.sdf, InventoryStore.sdf, StateMessageStore.sdf files, and the ServiceData folder are included in FBWF Exclusion list. · For more details, see Dell SCCM Administrators Guide. vWorkspace After installation of vWorkspace, install .txt file is created in C:\. CAD tool By default the build contains CAD tool, but in a disabled state. To enable the CAD tool, do the following: 1 Log in to the system using Admin account. 2 Disable the Write Filter. 3 Launch command prompt in elevated mode. 4 Run cd c:\windows\system32. 5 Run DWKBFilterMon.exe enable and reboot. Fixed issues None Known issues The following table lists the known defects in this release: 58 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support Table 70. Known issues Sl. no. 1 Issue description Multiple bluetooth device icons are displayed in the system tray--Periodic issue. Work around--if any The functionality is not affected and restarting the client removes the icons. 2 While running WES7P_CustomSysprep4man.bat, Low Disk space message appears The functionality is not affected. at system tray. 3 Dell Wyse 5060 thin client with WES7P--de-DE and fr-FR Run Time Commands are The functionality is not affected. not localized in respective language. 4 Video BIOS information does not show in advanced graphics settings. No work-around 5 Send and Receive option not present for Bluetooth while accessing from system From the Start button, select All tray. Programs. Select bluetooth file transfer and a pop-up window opens which gives two options to send or receive files. 6 Citrix receiver icon is missing in system tray. Launch the Citrix Receiver icon from the desktop for the Citrix Receiver icon to appear in the system tray. 7 Occasionally, WDM pull fails for Dell Wyse 5060 thin client devices. Reschedule the pull. 8 The scheduled packages are still present in the WDM console after image The functionality is not affected. deployment is successful--occasionally. Only Server console status is not updated. 9 Unable to play back the saved YouTube videos on the desktop. This issue is specific to the YouTube videos. Videos from other websites, such as MSN work properly. 10 Junk MAC IDs are appearing in the Client application. The functionality is not affected. 11 Internet Explorer crashes with multiple video playbacks for extended times. Restart the Internet Explorer. 12 BitLocker protection is turned off instead of suspend when custom sysprep is The option to suspend is not executed. available anymore. The BitLocker protection must be turned off. 13 Dell Open Printer driver is not working with Dell MFP e515dn printer. Install the ODM driver. 14 You cannot run the Deletefreespace application, if the folder Deletefreespace is Delete the folder. already present under C: 15 Server Connection Retry Attempts is exceeding 24 attempts during the discovery The functionality is not affected. process. 16 Custom Sysprep script (Build Master) execution may terminate abruptly while Disable BitLocker and TPM before checking for TPM status in TPM and BitLocker enabled systems. sysprep. 17 Some installed modules are not listed in the client info. The modules are as follows: The functionality is not affected. RDP, FBWF, Windows Media Player, Internet Explorer, Ericom, Wyse client information, HAgent versions. 18 Occasionally bash command prompt displays can't access tty: Job control turned Try pulling image again. off, while pulling image through WDM Merlin non-pxe. 19 Citrix Receiver USB redirection always works for all users of the client machine with No work-around all published Xendesktops, irrespective of the setting Simplify device connections for me in the xen desktop connection preferences UI. Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support 59 Sl. no. 20 21 22 23 24 25 26 28 27 28 29 30 31 32 33 Issue description Copyright Information for Flash.sys, Wyse RAM Disk is showing as Wyse/Wyse technology. Work around--if any No work-around KB2880890 is displayed twice in View installed updates section. No work-around Dell Wyse 5060 thin client (WES7P) BSOD (Error Code 0x000000B8) occurred Restart the client when logged in to Admin Mode from User Mode Phoenix Platform key avail in BIOS instead Dell PK. No work-around Occasionally check disk is running during system restart. Restart the client The System Tray is showing multiple Bluetooth Devices Icons (May be issue) Restart the client Client boots through PXE LAN if F12 key is pressed in Dell BIOS Splash screen No work-around Boot Menu and Bypass Splash screen hotkey's not displayed during the BIOS boot No work-around up (New Feature Request) Citrix Receiver options are not localized for Italian No work-around Vmware Client options are not localized for Italian No work-around Disk cleanup shortcut need to be removed from start menu if support is not there. No work-around All installed modules are not listing in the client informnation. No work-around Service Control Manager Error has occurred in Event Viewer with event ID 7023. No work-around Dell logo is missing in User contact path c:\Users\User\Contacts. No work-around Occasionally after downloading the image from USB, client displays a message Remove the USB and press enter to reboot after removing the USB Pen drive (While pushing the pulled image). No work-around SCCM2012 R2 Information: · SCCM Information is not present in Programs and features and client information because of Microsoft design. · Only Configuration Manager Control Panel Applet and SMS Agent Host Service are present. · SMSCFG.ini, clientstate.dat, wedmtrace.log, Ccmstore.sdf, InventoryStore.sdf, StateMessageStore.sdf files and Service Data folder will be included in FBWF Exclusion list. Tested peripherals Table 71. Tested peripherals Product Dell Pro Stereo Headset UC300 Dell USB Sound bar AC511 Dell 2.0 Speaker System AE215 Jabra Pro 935 MS Wireless headset (Mono) 60 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support Product Jabra Pro 930 MS Wireless headset Logitech B525HD webcam Dell Tray Load CD/DVD player(DW316) Dell USB Wired Keyboard - KB216 Dell USB Wired Optical Mouse - MS116 Dell USB Wired Keyboard with Smart Card reader - KB813 Dell Wireless Mouse - WM326 Dell 24 Monitor - E2417H Dell 23 Monitor- E2316H Dell 22 Monitor - E2216H Dell 20 Monitor - E2016H Dell 20 Monitor - E2016 Dell 19 Monitor - E1916H Dell 19 Monitor - E1916HV Dell 27 Monitor - P2717H Dell 24 Monitor - P2417H with stand Dell 24 Monitor - P2417H without stand Dell 23 Monitor - P2317H Dell 22 Monitor - P2217H with stand Dell 22 Monitor - P2217H without stand Dell 22 Monitor - P2217 Dell 22 Monitor - P2217 without stand Dell 20 Monitor - P2016 Dell 19 Monitor - P1917S Dell 24 Monitor - U2415 Dell 25 Monitor- U2515H Dell 27 Monitor - U2717D Dell 27 Monitor - U2717DA Dell 43 Monitor - P4317Q Dell 24 Monitor - MR2416 Dell 27 monitor - P2715Q 4K2K (UHD) monitor Dell 24 Monitor - P2415Q 4K2K (UHD) monitor Dell 30 Monitor UP3017 Power adapter + 3 foot power cord Dell Mono Unmanaged Printer - E515dn Dell Color Unmanaged Printer - E525w Dell Color Managed Printer - S5840cdn Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support 61 Product DP to HDMI converter DP to DVI converter DP to VGA converter Used and free space details Table 72. Used and free space details Platform Wyse 5060 thin client Flash size 64 GB OS Components Used Space (C: Drive) 14.2 GB Free space 44.6 GB Table 73. Driver details Component VGA Ethernet/ SFP Adapter Realtek HD Audio AMD Hi Def Audio Device USB xHCI driver Wyse RAM Disk Driver flash.sys Dell Open Print Drivers Bluetooth (as seen in add/remove programs) WiFi Version 15.201.2401.0 7.101.714.2016 6.0.1.7541 7.12.0.7723 1.1.0.185 5.0.2183.4 1.0.7.0 1.91.7882.0 19.0.1601.0594 18.11.0.8 Common application/Features/Files Table 74. Common application/Features/Files Applications/Features/Files RDC Citrix Receiver (Standard) Citrix Online Plug-in Citrix HDX Real Time Media Engine Windows Media Player Internet Explorer Power Term InterConnect Ericom PowerTerm WebConnect Version--If applicable 6.3.9600 (RDP 8.1 supported) 4.4.0.8014 (In Citrix About) 14.4.0.8014 (In Client Information, Programs and Features) 2.0.0.417 12.0.7601.18741 11.0.9600.18376 10.2.0.0.20140813.1 5.8.0.0 62 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support Applications/Features/Files VMware Horizon View Client vWorkspace Connector for windows Configuration Manager Client Adobe Flash player - ActiveX Adobe Flash player Plug-in Tight VNC Microsoft Lync VDI 2013 .NET Framework WSUS Microsoft Management Console Microsoft Silverlight Bit locker with TPM Windows Multi-touch Background Intelligent Transfer Service (BITS) Windows Defender Definition MSXML XML Paper Specification (XPS) Network Access Protection Credential Roaming WPA2 CredSSP ConfigMgr 2012 SP1 Client Wyse Wallpaper on All Users Registry Filter Windows Time Service DirectX File-Based Write Filter Manager fbwfmgr.exe Ntoskrnl.exe ArchiveInfo.exe ClientInformation.exe Disk_Size.exe C-A-D Map Tool DWKbFilter.sys DWKbFilterMon.exe Version--If applicable 4.1.0.1487 8.6.309.4062 5.00.7958.1000 20.0.0.270 20.0.0.267 2.6.4.0 15.0.4420.1017 4.6.01055 Supported Management Console 3.0 Version 6.1 (Build 7601: SP1) 5.1.30514.0 Supported Supported Supported 1.227.441.0 dated 8/23/2016 Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported 11 1.0.299.0 6.1.7601.18741 1.0.0.4 10.0.0.9 3.0.0.5 2.2.0.0 2.2.0.4 2.2.0.4 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support 63 Applications/Features/Files DWKbFilterWatchdog.exe Version--If applicable FBWF Service FBWFSvc.exe FBWF System Tray UI - FBWFTray.exe HAgent.exe HAgent_UI.exe Wyse Device Agent (WDA) NetXClean.exe NumLock_Toggle.exe NumLockTrigger.exe TimeZonePreservation.exe Wfacss.exe WindowsEmbeddedTest.exe (equivalent to WES7Test.exe) Winlog.exe WinPing.exe Winterm.dll Xwfile.exe Sysprep4man scripts 1.0.2.2 1.0.2.2 12.1.1.25 12.1.1.25 2.1.1 3.0.0.7 1.0.0.4 1.0.0.5 1.0.0.4 1.0.1.3 Not applicable Part of Client Info Not applicable 2.0.0.9 1.0.0.5 Build_Master.cmd QFEs added in the release Table 75. QFEs added in the release QFEs added in the release KB2841134 KB2841134 KB2841134 KB2841134 KB2841134 KB2841134 KB2841134 KB2841134 KB2841134 KB2841134 KB2670838 KB2840631 KB2843630 KB2847927 KB2852386 KB2853952 KB2857650 KB2859502 KB2861698 KB2862152 KB2862335 KB2862973 KB3092601 KB3092627 KB3093513 KB3097989 KB3101722 KB3102429 KB3102810 KB3107998 KB3108371 KB3108381 KB3108664 64 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support QFEs added in the release KB2830477 KB2592687 KB2819745 KB2479943 KB2487305 KB2492386 KB2496898 KB2502664 KB2506212 KB2509553 KB2511455 KB2515325 KB2526967 KB2534366 KB2544893 KB2545698 KB2547666 KB2552343 KB2556532 KB2560656 KB2563227 KB2564958 KB2570814 KB2574819 KB2579686 KB2585542 KB2598845 KB2864202 KB2868038 KB2868116 KB2871997 KB2872035 KB2882822 KB2884256 KB2891804 KB2892074 KB2893294 KB2893519 KB2894844 KB2898785 KB2900986 KB2908783 KB2911501 KB2913431 KB2913751 KB2918077 KB2919469 KB2929733 KB2931356 KB2937610 KB2943357 KB2957189 KB2965788 KB2968294 KB3108670 KB3109094 KB3109103 KB3109560 KB3110329 KB3112343 KB3118401 KB3121255 KB3121461 KB3122648 KB3123479 KB3124275 KB3124280 KB3126587 KB3127220 KB3133977 KB3134814 KB3135445 KB3135983 KB3137061 KB3138378 KB3138612 KB3138901 KB3138910 KB3138962 KB3139914 KB3139923 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support 65 QFEs added in the release KB2604115 KB2620704 KB2621440 KB2631813 KB2639308 KB2640148 KB2644615 KB2647753 KB2654428 KB2660075 KB2661254 KB2667402 KB2676562 KB2679255 KB2685747 KB2685811 KB2685813 KB2690533 KB2698365 KB2705219 KB2706045 KB2709715 KB2716513 KB2718704 KB2719033 KB2719857 KB2724197 KB2970228 KB2972100 KB2972211 KB2973112 KB2973201 KB2973351 KB2977292 KB2978120 KB2978742 KB2980245 KB2984972 KB2985461 KB2992611 KB2999226 KB3000483 KB3003743 KB3004361 KB3006121 KB3006137 KB3010788 KB3011780 KB3021674 KB3021917 KB3022777 KB3023215 KB3030377 KB3033889 KB3139929 KB3139940 KB3141092 KB3142024 KB3142042 KB3145739 KB3146706 KB3146963 KB3147071 KB3148198 KB3148851 KB3149090 KB3150220 KB3153171 KB3153199 KB3153731 KB3154070 KB3155178 KB3156013 KB3156016 KB3156017 KB3156019 KB3156417 KB3159398 KB3160005 KB3161561 KB3161664 66 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support QFEs added in the release KB2726535 KB2727528 KB2729094 KB2732487 KB2736422 KB2742599 KB2750841 KB2761217 KB2763523 KB2770660 KB2786081 KB2791765 KB2799494 KB2799926 KB2800095 KB2807986 KB2808679 KB2813170 KB2813347 KB2813430 KB2818604 KB2834140 KB3033929 KB3035126 KB3037574 KB3040272 KB3042553 KB3045685 KB3046017 KB3046269 KB3054476 KB3055642 KB3059317 KB3067903 KB3072305 KB3074543 KB3075851 KB3076949 KB3078601 KB3078667 KB3083324 KB3083710 KB3084135 KB3086255 KB3161949 KB3161958 KB3162835 KB3163245 KB3164033 KB3164035 KB3168965 KB3170106 KB3170455 KB3170735 KB4012204 KB4012212 KB4012864 KB4014661 KB4015193 KB4015546 KB4016446 KB947821 KB976902 KB976932 KB4015549 KB3139398 Dell Wyse 5060 Thin Client with WES7P for Tier 3 Language support 67 18 Installing the add-on Download the add-on package This section describes the steps to download the add-on from Dell support site. 1 Go to www.dell.com/support. 2 In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword field, type the Service Tag or the model number of your device, and press Enter or click the search icon. 3 On the product support page, click Drivers & downloads. 4 Select the appropriate operating system. 5 From the list, locate the add-on entry and click the download icon. Install the add-on using Wyse Management Suite This section describes the steps to install the add-on using Wyse Management Suite. 1 Register the device to the Wyse Management Suite server, and add the device to the respective groups. 2 Copy the .exe file to the Wyse Management Suite server repository. 3 Log in to Wyse Management Suite. 4 Click Portal Administration, and then click File Repository under Console Settings. 5 Select the Local Repository check box. 6 Click Sync Files. Wait for the synchronization process to complete. The synchronization process copies the package from the repository to Apps and Data. 7 Click Apps and Data. The Apps and Data page is displayed. 8 Verify the copied package in the applications list. 9 To create a group in the Wyse Management Suite server, click Groups & Configs. The Groups & Configs page is displayed. 10 Click the Plus sign (+) button and enter the required details to register your client in the same group. 11 Click Apps and Data. The Apps and Data page is displayed. 12 Click Thin Clients under App Policies. 13 Click Add Policy to add the policy to the required group. 14 Update the required fields and click Save. NOTE: For the .exe file installation, the silent installation parameter is --silent. For repair, the silent parameter is -silent --repair, and for uninstallation, the silent parameter is --silent --uninstall 15 Click Yes to schedule the job immediately. 16 Go to the App Policy job, and enter the description. 17 From the Run drop-down menu, select Immediately. 18 Click Preview and then click Schedule. The package deployment takes a few minutes to complete. 68 Installing the add-on NOTE: · The lock screen is displayed during the package installation process on all the thin clients. · System reboots two times during the package deployment. Install the add-on using Wyse Device Manager This section describes the steps to install the add-on using Wyse Device Manager. 1 Copy the respective .exe file to the WDM server. 2 Launch Wyse Device Manager and login using valid credentials. 3 Click Applications in the Dell Wyse Device Manager dashboard page. The options Images, Other Packages, Agent Update, Device Configuration, and PCoIP Device Configuration are displayed. 4 Select Other Packages. 5 Click Create Package Plus (+). The application prompts to download the Package Register utility. 6 Click Allow. The Create Package window is displayed. 7 Download the .exe file on your local repository. 8 Navigate to the folder, and run the Package Register utility file. The WDM Package Registration Utility window is displayed. 9 Enter WDM server address and user credentials in the respective fields. 10 Select EXE to register, and click Browse. The WDM Package Uploader window is displayed with the progress status bar. 11 Click Open. The list of selected packages is displayed. 12 Select the appropriate operating system package and provide the command line parameter as --silent for installation. For repair, provide the command line parameter as --silent --repair, and for uninstallation provide the command line parameter as -silent --uninstall. 13 Click Upload. The status is displayed as Success, and the package is displayed under Other Packages. 14 Go to Devices and select the target client. 15 Click Update. 16 Go to Select Package > Other Package, and select the add-on package. 17 Click Save. A pop-up is displayed on the target device. 18 Click Update Now on the target device. C:\Temp folder is created. You must edit the .rsp script manually to delete the temp folder using the command DT C:\Temp. NOTE: · The lock screen is not displayed during the package installation process on all the thin clients. · System reboots two times during the package deployment. Install the add-on using System Center Configuration Manager 2016--SCCM Prerequisites: 1 Disable the write filter. 2 Add the thin client to the SCCM server domain and restart. 3 Log in to the thin client with valid SCCM domain credentials. Installing the add-on 69 4 Change the time zone and time (HH:MM:SS) according to the SCCM server. 5 Go to Control Panel > Configuration Manager > Site > Configuration Settings. 6 In the Configuration Manager service location section, enter the site code. 7 In the Actions tab, select each action, and click Run Now. A system tray message is displayed, and the new software is available for installation. Add a device to the new device collection This section describes the steps to add a thin client to the new device collection list. 1 Go to Assets and Compliance > Device Collections. 2 In the Devices list, right-click a device, and go to Add Selected Items > Add Selected Items to New Device collection. 3 In the Device Collections window, enter the new device collection details, such as name and limiting collection, and click OK. 4 In the Assets and Compliance section, click Device Collections, and verify whether the device is added. Add a device to the existing device collection This section describes the steps to add a thin client to the existing device collection list. 1 Go to Assets and Compliance > Device Collections. 2 In the Devices list, right-click a device, and go to Add Selected Items > Add Selected Items to Existing Device collection. 3 In the Device Collections window, select the device collection group to which you need to add the device, and click OK. 4 In the Assets and Compliance section, click Device Collections, and verify whether the device is added. Package deployment After the thin client is added to the device collection list, use any of the following methods to deploy the add-on: · Create and distribute a package. · Create and deploy a task sequence. Create and distribute a package This section describes the steps to create and distribute a package. 1 Copy the .exe file to a shared folder. 2 Expand Software Library > Overview > Application management > Packages. 3 Right-click Packages, and click Create Package. 4 Enter the package name, description, manufacturer name, language, and version. 5 Click Next. 6 Browse to the source folder where you have copied the add-on files. 7 Click Next. The newly created packages are listed in the Application Management under Package. 8 Select the Standard Program option as the program type. The Standard Program page is displayed. 9 Enter the required details, and click Browse to go to the file location. 10 Select the .exe or .msi file, and enter --silent for silent installation, -silent -repair for repair, and-silent -- uninstall for uninstallation. 70 Installing the add-on 11 Click Next. 12 Click Next until the window with the Close button is displayed. 13 Click Close. 14 Select the package, right-click, and click Distribute Content . 15 From the Add drop-down list, select Distribution Point. 16 Select an option to schedule job at a specified time, and click Next. 17 Verify the information that you have provided on the summary page, and click Next. 18 Click Close. 19 Right-click on the created package, and click Deploy. 20 Click Collection, and browse to the device collection list. 21 Select the device, and click Next. 22 From the Add drop-down list, select Distribution Point. 23 Select the available distribution points, and click OK. 24 Click Next to complete the deployment process. 25 Click Close. The content status is displayed in green. It may take a few minutes to complete the distribution process. Create and deploy a task sequence This section describes the steps to create and deploy a task sequence. 1 Copy the .exe file to a shared folder. 2 Expand Software Library > Overview > Operating System. 3 Right-click Task Sequence, and click Create Task Sequence. 4 In the New Task Sequence wizard, select Create Custom Task Sequence, and click Next. 5 Click Close. 6 Right-click the created task sequence, and click Edit. 7 From the Add drop-down list, go to Software > Install Package. 8 Select the created package, and click Apply. 9 Click OK. 10 Go to Start > All Programs > Microsoft System Center > Configuration Manager Console. The System Center Configuration Manger window is displayed. 11 Click Software Library. 12 Right-click the created the task sequence and deploy it to the required device collection. Installing the add-on 71 19 Resources and support Accessing documents using the product search 1 Go to www.dell.com/support. 2 In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example, Wyse 3040 thin client or Wyse ThinOS. A list of matching products is displayed. 3 Select your product and click the search icon or press Enter. 4 Click Manuals & documents. Accessing documents using product selector You can also access documents by selecting your product. 1 Go to www.dell.com/support. 2 Click Browse all products. 3 Click Thin Clients. 4 Click the desired category, either Wyse Hardware or Wyse Software. 5 Click the desired product. 6 Click Manuals & documents. 72 Resources and support 20 Contacting Dell Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for technical support or customer service issues, see www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog. Contacting Dell 73AH XSL Formatter V6.3 MR3 for Windows (x64) : 6.3.4.25128 (2016/07/01 17:39JST) Antenna House PDF Output Library 6.3.815 (Windows (x64))