ZyXEL NSA320S Media Server Quick Start Guide
Brand: ZyXEL
Introduction
This guide provides essential steps to quickly set up your ZyXEL NSA320S Media Server. It covers hardware installation, network connection, and initial software configuration.
Hardware Installation
Follow these steps to install your hard drive and assemble the device:
Remove the cover: Slide the cover to the left (A) and pull it forward (B) to remove it.
Diagram: Illustrates removing the front cover by sliding it left and then pulling it forward.
Release and remove the tray: Release the tray latch (A) and pull out the tray (B).
Diagram: Shows the internal tray latch being released and the hard drive tray being pulled out.
Install the hard drive: Attach your hard drive to the tray using the provided screws. Then, install the tray back into the device (B).
Diagram: Depicts a hard drive being secured to the tray with screws, followed by the tray being inserted into the main unit.
Close the cover: Place the cover on the front (A) and slide it to close (B).
Diagram: Shows the front cover being positioned and slid into place to secure the device.
Network Connection and Software Setup
Connect your NSA320S to your network and computer to begin configuration:
Connect to network and power: Use the included Ethernet cable to connect your network storage to a router or switch LAN port on the same network as your computer. Plug in the power adapter. Press the power button. Ensure the network activity LED stays green after startup. The HDD LEDs should light green for detected hard drives.
Diagram: Illustrates the NSA320S connected via an Ethernet cable to a network router/switch and connected to a power source.
Run the setup utility: On a computer on the same network, insert the provided disc. Open the disc and double-click "setup.exe". Follow the on-screen installation instructions. Once installation is complete, run the installed utility and double-click "NSA320S". Follow the initialization wizard.
Diagram: Shows a computer screen displaying the contents of the setup CD, highlighting "setup.exe", and another screen showing the ZyXEL NSA320S utility interface with an option to launch the Initialization Wizard.
Default Login Credentials
Username: admin
Password: 1234
Further Information
For detailed configuration of all features, please refer to the User's Guide on the included CD.
Compliance and Declarations
This product complies with various regulatory standards, including RoHS (Restriction of Hazardous Substances) and CE (Conformity European). Specific declarations and certifications for different regions are provided, including FCC (Federal Communications Commission) compliance for the US market. Detailed information regarding safety, EMC, and environmental compliance is available.
External links provided include ZyXEL's official websites for the EU and US markets.
