VIOFO VS1 USER MANUAL

1. Product Overview

Standard Items

• Dashcam
• Type-C Data Cable
• Spare Mount Sticky Pads

Optional Accessories

• Dual USB Car Charger
• Trim Removal Tool
• Windshield Static Stickers x2
• HK4 Hardwire Kit (Input: 12V/24V, ACC: Yellow, GND: Black, POWER: Red)
• Bluetooth Remote Control
• MicroSD Card

Product Diagram

The dashcam unit features the following components:

• 1: Power In / microSD Card Reader Mode (computer)
• 2: Video Protect indicator
• 3: Recording Status Indicator
• 4: GPS Module
• 5: microSD Card Slot
• 6: Microphone Status Indicator
• 7: Microphone ON/OFF button
• 8: Lens

2. Installation

Insert / Remove the Memory Card

To Insert: Ensure the camera is turned off. Hold the memory card in the correct orientation and slide it into the card slot until it clicks.

To Remove: Ensure the camera is turned off. Push the edge of the memory card with your fingernail; it will spring out for removal.

Note:

• MicroSD card sold separately. Requires Class-10 or UHS-I rating, up to 512GB capacity.
• VIOFO industrial grade microSD cards are recommended for endurance and performance.
• Memory card must be formatted before first use (exFAT or FAT32 file system, via computer or camera).
• Unplug the power cable before inserting or removing the microSD card.
• Inserting/removing the card during recording may corrupt files.

Format the Memory Card

Memory card must be formatted before first use.

In Camera: Use the VIOFO App or long-press the [format button].

Using Computer: Follow your computer's user manual. For deep formatting, download the GUIFormat tool from viofo.com/download/guiformat.exe.

Note: Periodic formatting ensures optimal performance. Formatting erases all data; back up important files first.

Install the Dashcam

1. Select a mounting location on the windshield behind the rear-view mirror, ensuring it does not obstruct the driver's view.

2. Wipe the windscreen surface clean with a dry cloth to ensure it is grease-free for the sticky pad.

3. Mount the dashcam directly to the windshield using the sticky pad, or attach the static sticker first (refer to page 9 for static sticker guide).

4. Peel the protection film off the sticky pad.

5. Fix the camera onto the selected location.

6. Adjust the Bracket Angle: Adjust the bracket up/down as needed for video recording.

Connect to Power: Insert the car charger USB cable's male port into the camera mount's USB Type-C port. Plug the USB power adapter into your vehicle's 12V / 24V female power socket.

Tips:

• Avoid locations that interfere with driver visibility or safety.
• Mount close to the rearview mirror for balanced coverage of the scene.
• Position the lens within the windshield wiper's sweeping range for clear views on rainy days.
• Do not install near or on airbag panels.
• Ensure the mounting location is not affected by sun control film (window tint) or other electronic equipment.

Note: Do not install near airbag panels or within their working range, as the manufacturer is not liable for injury or death caused by airbag deployment.

Install the Static Sticker (Optional)

1. Wipe the windscreen clean.

2. Peel the red protective film from the static sticker and attach it to the windscreen, pressing to remove bubbles.

3. Peel the green protective film from the static sticker.

4. Peel the protection film from the mount's sticky pad and attach it to the sticker. Press firmly.

3. Dash Cam Recording Operation

Loop Recording

1. Insert a microSD card. Automatic loop recording starts when the camera powers on.

2. Video file time frames: 1, 2, 3, 5, or 10 minutes.

3. When microSD card space is insufficient, the oldest files are overwritten.

4. Loop recording files are saved to: SD card:\DCIM\MOVIE folder.

Emergency Recording

1. Automatic Emergency Recording: When the G-sensor detects a collision, current footage is locked to prevent overwriting.

2. Manual Emergency Recording: Short-press the [record button] during recording to lock the current footage.

Note: G-sensor sensitivity can be adjusted via the VIOFO App ("G-sensor" option). Locked files are saved to: DCIM\Movie\RO.

Disable / Enable Audio Recording

Press the [mic button] once to turn audio recording off or on. The [mic button] LED will be off or solid Red.

Parking Mode

Three options are available:

1. Auto Event Detection: Records a video sequence when a moving object is detected during parking. Stops recording when no new movement is detected.
2. Time Lapse Recording: Records at low frames (1/2/3/5/10 fps), continuously without audio.
3. Low Bitrate Recording: Uses low bitrate for video and audio, with small file sizes for continuous recording.

Note: Parking mode provides surveillance only when the engine is off and the USB Type-C Hardwire Kit is used for continuous power. The Hardwire Kit protects the car battery. VIOFO HK4 ACC hardwire kit cable is recommended for parking mode.

Parking Recording Timer: "Off" means continuous recording until hardwire kit cuts power. "1 hour" means the camera shuts down after 1 hour in parking mode.

Enter Parking Mode Timer: (For hardwire cable only) "OFF" enters parking mode immediately when the engine is off. "90s" enters parking mode 90 seconds after the engine is off.

Parking G-Sensor: Detects impacts or collisions, triggering event recording. High sensitivity is recommended for parking mode.

Parking Motion Detection: Adjusts sensitivity to prevent minor motion (wind/rain) from triggering recording.

Image Rotate: Allows changing the camera image orientation.

Image Mirror: Allows reversing the image.

Notification Sounds: Options for Off, Button beep only, Startup sound only, or All on. Controls button and startup sounds.

Voice Notification: Turn voice notifications on or off.

Note for Hot Weather: If parking outside in hot summer, time lapse recording is recommended. If the car interior exceeds 60°C, turn off the dashcam to prevent errors or damage.

4. Playback and Manage Videos

Playback Video on VIOFO APP

Long-press the [Wi-Fi button] to enable Wi-Fi. Connect your phone to the dashcam's Wi-Fi. Open the VIOFO app and select "Connect your camera" to control the dashcam, play, and manage files.

Playback Video on PC

1. Remove the memory card from the dashcam (ensure it's powered off first).

2. Insert the memory card into an SD card adapter or reader connected to your PC.

3. Open the DCIM folder and use a video player (like VLC) to playback videos.

Note: If your PC has a microSD slot, you can insert the card directly.

Video File Storage Location

5. Review and Control on Smartphone

Connect to Smartphone

The VIOFO app allows remote camera control via smartphone, including full camera control, live preview, playback, and video recording.

Android Device

Download the app from Google Play or the APK directly from the official website: https://viofo.com/en/content/13-app/

iOS Device

Download the app from the App Store.

Connect VIOFO APP

Long-press the [Wi-Fi button] to turn on Wi-Fi. The Wi-Fi name (SSID) is VIOFO_VS1_XXXX, with a default password of 12345678. The Wi-Fi Status LED will flash red & blue alternately when Wi-Fi is active.

• Step 1: Connect your phone to VS1 Wi-Fi. The camera's LED will show solid blue when connected.
• Step 2: Open the VIOFO app and select "Connect your camera" to control the dashcam.
• Step 3: View live feeds from both cameras, change settings, and check files within the app.

APP Layout Overview

The app interface, accessed by choosing "Connect your camera", includes:

• 1 - Menu
• 2 - Home Page
• 3 - Downloaded Video
• 4 - VIOFO Official Facebook Page
• 5 - Official Support
• 6 - Firmware Update
• 7 - VPN connection

Preview Video

The app interface displays:

• 1 - Live Video
• 2 - Audio Recording Status
• 3 - Switch Camera Video Source (Not Applicable)
• 4 - Take a Video Snapshot
• 5 - Go to Video File Lists
• 6 - Start / Stop Recording
• 7 - Go to System Settings
• 8 - Video File Lists
• 9 - Download Video Files
• 10 - Delete Video Files

6. Install Optional Accessories

Install Bluetooth Remote Control

Mount the optional Bluetooth Remote Control in a convenient dashboard location. Pressing the remote locks the current video file and takes a video snapshot, helping to protect important footage without taking your eyes off the road.

Pairing with Dash Camera

• Ensure the dashcam is powered on.
• Press and hold the button on the remote control for 3 seconds to pair with the camera.
• A successful pairing is indicated by the remote's LED turning blue.

7. System Settings

Camera settings can be accessed via the VIOFO App. Connect the app, stop recording, and navigate to the settings menu.

Video Setting

• Video Resolution: 2560 * 1440P 30fps or 1920 * 1080P 30fps.
• Time-lapse Recording: Options: Off, 1, 2, 3, 5, or 10 fps. Records at specified intervals to conserve memory and reduce review time. Default is Off.
• Loop Recording: Options: Off, 1, 2, 3, 5, or 10 minutes. Recording starts automatically upon power-on with a microSD card. Each file is one minute long by default; older files are replaced when storage is full.
• Recording Audio: Turn the microphone on/off by pressing the [mic button].
• Exposure Value: Adjusts EV from -2.0 to +2.0 for better footage under different lighting. Default is 0.0.
• HDR (High Dynamic Range): Options: Off, On, or HDR Timer. Balances lighting in bright and dark areas to avoid overexposure. Default is Off.
• G-Sensor: Measures shock forces and locks video. Sensitivity settings ("low" to "high") determine the force needed to lock a file. "Low" is recommended.
• Date Stamp: On/Off. Imprints the time and date on the video.
• Bitrate: Options: Low, Normal, High, Maximum. Higher bitrate improves video quality and smoothness, especially for fast motion or high contrast scenes, but may reduce recording time. Lower bitrate saves space and extends recording time.

System Setting

• Wi-Fi Channel: Options: Off, 2.4GHz, or 5GHz. The 5GHz mode is recommended for higher speed.
• Time Zone: Set the current time zone for GPS time and date calibration. Manual adjustment is needed for daylight savings.
• Time Synchronization: Synchronizes time with your mobile phone.
• Date Format: Choose the desired date format.
• Boot delay: Set a delay (Off, 5s, or 10s) before the camera boots up.
• Parking Mode: (See dedicated section above for details on Auto Event Detection, Time Lapse, and Low Bitrate Recording).
• Parking Recording Timer: Controls how long the camera stays in parking mode after the engine is off.
• Enter Parking Mode Timer: Sets a delay before entering parking mode after the engine is off (for hardwire cable use).
• Parking G-Sensor: Adjusts sensitivity for detecting impacts in parking mode.
• Parking Motion Detection: Adjusts motion detection sensitivity to avoid false triggers.
• Image Rotate: Allows changing the camera image orientation.
• Image Mirror: Allows reversing the image.
• Notification Sounds: Configure sounds for buttons and startup.
• Voice Notification: Turn voice notifications on or off.
• Voice Control: Turn voice control on/off. When active, allows control via spoken commands (e.g., take photos, toggle Wi-Fi, start recording).
• Note on Voice Control Language: Voice commands work best when the dashcam system language matches the command language (English, Chinese, Russian, Japanese). English is the default for triggering voice control in other systems.
• Voice Command: Specific commands include: Take Photo, Video Start, Lock the Video, Turn On Audio, Turn Off Audio, Turn On WiFi, Turn Off WiFi.
• GPS: Turn the GPS logger on/off. GPS data includes location and speed. Disabling GPS prevents speed/position measurement and time/date synchronization. Use "Dashcam Viewer" to visualize GPS data on a computer.
• Speed Unit: Select between Kilometers per hour (KMH) and miles per hour (MPH).
• GPS Info Stamp: Imprints GPS information on the recorded video.
• Camera Model Stamp: Imprints the camera model on the recorded video.
• Frequency: Adjust to minimize video flickering and banding.
• Format SD Card: Deletes all data on the MicroSD card. This operation is irreversible; back up files beforehand.
• Reset Camera Settings: Resets all settings to their default values.
• Wi-Fi Name (SSID): Change the Wi-Fi network name.
• Wi-Fi Password: Change the Wi-Fi password (default is 12345678).
• Custom Text Stamp: Imprints custom text onto the recorded video.
• Car License Number: Imprints the car's license number onto the recorded video.
• Free Space on Card: Displays the remaining storage space on the microSD card.

8. Firmware Upgrade

Follow instructions on the website to upgrade firmware: https://viofo.com/content/42-help-and-support/

Note:

• Format the microSD card in the camera before upgrading for stable read/write operations.
• Do not unplug or power off the camera during a firmware upgrade, as it may prevent the camera from booting subsequently.

9. Notice

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Caution:

Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Shenzhen VIOFO Technology Co., Ltd, declares that this Radio Frequency peripheral is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC Warning

English:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

French:

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.

10. Customer Service

Thanks for choosing VIOFO! All products are warranted for 12 months and accessories for 3 months from the date of purchase. VIOFO offers lifetime technical support. We are committed to ensuring your satisfaction with our products and services.

Product Registration Program

VIOFO offers a Product Registration Program to help customers extend their warranty by 6 months. Visit www.viofo.com and register your new product to extend the warranty from 12 months to 18 months.

[QR code for 6-month extended warranty]

Video Sharing

Share videos caught on VIOFO cameras with us at share@viofo.com for a chance to win a gift.

How to Contact Us?

• Submit a ticket at support.viofo.com
• Live chat box at www.viofo.com
• Email: support@viofo.com
• Facebook: www.facebook.com/viofo.world
• Phone: +86 755 8526 8909 (CN)
• Hours: Mon-Fri 9am-6pm

[QR code for submitting a ticket]