Litemons C30Bi Bi-Color LED Photography Panel Light

Important Safety Instructions and Attentions

This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety precautions must always be followed during use:

1. Read and understand the instruction manual before use.
2. Professional lighting equipment; prohibited for children. Close supervision is required when children are near.
3. Not for general lighting. Avoid use by individuals with eye damage or sensitivity.
4. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns when the lamp is on.
5. Never look directly at the lamp beads when the lamp is on. Use strong light under professional guidance and avoid prolonged exposure. If eye discomfort occurs, turn off the lamp, suspend use, and seek medical attention.
6. If lamp beads are damaged or deformed by heat, stop using the equipment and contact the manufacturer or qualified personnel for replacement.
7. Suitable for operating environments between -10℃ to +40℃ and normal humidity.
8. Do not use damaged equipment or accessories. Ensure professional inspection and repair before use.
9. If the casing is broken due to dropping, squeezing, or strong impact, do not use to avoid electric shock.
10. Use extension cords with a current rating greater than or equal to the equipment's rating to prevent overheating.
11. Properly place power cords to avoid contact with hot surfaces, damage from pulling, or tripping hazards. Use original manufacturer power cords.
12. Unplug the equipment before cleaning and repairing. Do not pull the power cord to unplug. Grasp the plug firmly. Connect to a grounded outlet.
13. This equipment is not waterproof. Keep it dry and do not immerse it in liquids. Install in a dry, ventilated place, avoiding rainy, humid, dusty, or overheated environments. Do not place objects on the lamp or allow liquids to enter.
14. Do not disassemble the product. If it fails, it must be checked and repaired by authorized personnel.
15. Ensure the equipment has completely cooled down before storing. Unplug the power cord. Store in the carrying case or a ventilated, dry place.
16. Do not place near flammable or volatile solvents like alcohol or gasoline.
17. Do not use non-recommended accessories to avoid fire, electric shock, or personal injury.
18. Frequently clean lamp bead glass. Stains may cause glass to burst. Clean with a dry, soft cloth.
19. This product complies with ROHS, CE, and FCC certifications.
20. Safety instructions are based on strict factory testing. Design and specifications are subject to change without notice. Check the official website for the latest information.
21. One-year warranty period. Consumable accessories like batteries, adapters, and power cords are not covered.
22. Unauthorized repairs will void the warranty.
23. Failures caused by non-standard operation are not covered by the warranty.

Foreword

Thank you for purchasing! The Litemons C30Bi is a delicate pocket-size LED light with dual dials for brightness and CCT adjustment, suitable for various shooting scenarios like comic exhibitions, camera fill light, food vlogging, and general vlogging.

Do not stare at the light source.

Name of Parts

1. Light Beads

2. 1/4” Screw Hole

3. USB-C Port

4. Brightness Adjust Dial

5. CCT Adjust Dial

6. Battery Level Indicator ①

7. Battery Level Indicator ②

8. Battery Level Indicator ③

9. Battery Level Indicator ④

What’s Inside

• Light Body × 1
• Charging Cord × 1
• Diffuser × 1
• Instruction Manual × 1

Note: Diagrams are for reference only. Actual products may vary due to continuous updates.

Mount onto the Bracket

The 1/4" screw hole allows for quick mounting to an optional bracket. Align the screw and rotate clockwise to lock.

Charging

Connect the light body's USB-C port to a power source using the provided charging cord.

Battery Level Indicators

Four indicators show the remaining battery level:

• Indicator ①: 0%-25%
• Indicator ②: 26%-50%
• Indicator ③: 51%-75%
• Indicator ④: 76%-100%

Brightness Adjust Dial

Brightness Range: 0%-100%

Rotate clockwise to turn on and increase brightness; rotate counterclockwise to decrease brightness and turn off.

CCT Adjust Dial

CCT Range: 2800K-6500K

Rotate clockwise to increase CCT; rotate counterclockwise to decrease CCT.

Note: The red dot on the dial indicates the current brightness and CCT range.

Technical Data

Specifications

Note: Specifications and data are subject to change without notice. All data are average values tested at 100% brightness.

Illuminance Data

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity

GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive GPSR(EU)2023/988, 2014/30/EU. They are allowed to be used in all EU member states. For more information of DoC, please visit: https://www.godox.com/eu-declaration-of-conformity/

Warranty

Please fill in and keep this warranty card for service. This document applies to products listed in the Product Maintenance Information. Other products or accessories are not included.

The warranty period is calculated from the first purchase date, as registered on the warranty card.

To obtain warranty service, contact the product distributor, authorized service institution, or the Godox after-sale service. A valid warranty card is required.

Inapplicable Cases

Warranty and service are not applicable in the following cases:

• Product or accessory has expired its warranty period.
• Damage due to inappropriate usage, maintenance, or preservation (e.g., improper handling, non-standard use, improper plugging/unplugging, drops, squeezing, exposure to extreme temperatures, solvents, acids, bases, water, or humidity).
• Damage caused by unauthorized installation, maintenance, alteration, addition, or detachment.
• Original identification information is modified or removed.
• No valid warranty card.
• Damage caused by unauthorized software.
• Damage due to force majeure or accidents.
• Damage not attributable to product quality issues.

In such cases, seek solutions from the responsible parties; Godox assumes no responsibility. Issues caused by parts, accessories, or software beyond the warranty scope are not covered. Normal wear and tear, discoloration, and consumption are not considered warranty failures.

Maintenance and Service Support Information

Product Information:

Godox After-sale Service Call: +86-755-29609320(8062)

Shenzhen Godox Photo Equipment Co., Ltd.

Address: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China

Tel: +86-755-29609320(8062) | Fax: +86-755-25723423

E-mail: godox@godox.com | Website: www.godox.com

Made in China | 705-C30BY0-03

Certifications: CE, FCC