Zalman S3 ATX Mid Tower Computer Case

User's Manual

Important Precautions

Read this manual carefully before installing.
Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
Wear gloves to prevent accidents when installing the product.
Severe damage may occur when mounting the system, so do not apply excessive force.
Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
Be careful not to block the ventilation hole of the product when using the system.
Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
Do not wipe the surface of the product using chemicals (e.g., organic solvents such as alcohol or acetone).
Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
Store and use the product out of children's reach.
The company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.

Specifications

Model	S3	S3(KOR)
Case Form Factor	ATX Mid-Tower
Dimensions	412(D) x 189(W) x 451(H) mm
Weight	3.7kg	3.8kg
Case Materials	Steel, Plastic, Acrylic
Motherboard Support	ATX / MATX / Mini-ITX
Maximum VGA Length	330mm
Maximum CPU Cooler Height	156mm
Maximum PSU Length	180mm
PCI Expansion Slots	7
Case Drive Bays	2 x 3.5", 2 x 2.5"
Fan Support	Front: 3 x 120mm Top: 2 x 120mm Rear: 1 x 120mm Bottom: 2 x 120mm
Fans Included	Front: 2 x 120mm Rear: 1 x 120mm
Radiator Support	Front: 1 x 120mm Top: 1 x 120mm Rear: 1 x 120mm
I/O Ports	1 x Headphone, 1 x Mic, 2 x USB 2.0, 1 x USB 3.0

I/O Ports

The front panel features the following ports:

A: Power button
B: Microphone jack
C: Headphone jack
D: USB 2.0 port
E: USB 3.0 port
F: Reset button
G: Power LED indicator
H: HDD LED indicator

Included Accessories

Manual
PCI Slot cover (x2)
Cable tie (x5)
USB Rubber cover (x3)
Media Rubber cover (x2)
HDD Screw (x8)
SSD/MB Screw (x18)
PSU/VGA Screw (x8)
Motherboard Stand-off (x3)
FAN Screw (x8)

Installation Guide

1. Separating the Side Panel

To separate the side panel, follow the instructions shown in the diagram.

2. Mounting the Motherboard

The case comes with 6 stand-offs pre-installed. If necessary, install additional stand-offs according to your motherboard type and the mounting positions indicated in the diagram. Then, mount the motherboard onto the stand-offs.

Diagram shows ATX, mATX, and Mini-ITX motherboard layouts with corresponding stand-off positions.

3. Mounting 3.5" and 2.5" SSD/HDD

Separate the tool-free 2.5"/3.5" combo HDD cage. Assemble your HDD or SSD into the cage, then mount the assembled cage into the designated slot.

Diagram illustrates the process of assembling SSD/HDD into the cage and mounting it.

4. Mounting 2.5" SSD/HDD

2.5" SSD and HDDs can be installed on the right side of the case as shown in the diagram.

Diagram shows a 2.5" drive being mounted on the right side panel.

5. Mounting PCI-E(VGA) Card

Loosen the screw securing the PCI slot cover. Remove the PCI cover. Mount your graphics card into the appropriate PCI-E slot and secure it with the screw.

Diagram shows the process of removing the PCI slot cover and installing a graphics card.

6. Mounting the Top Fan

As shown in the picture, install the fan onto the top of the case using bolts.

Diagram illustrates mounting a fan on the top panel.

7. Mounting the Bottom Fan

Install the fan onto the bottom of the case using fan screws.

Diagram shows fan installation at the bottom of the case.

8. Mounting the Front Fan and Front Radiator

After removing the front cover, mount the fan or radiator onto the front mounting holes as shown in the figure. For liquid coolers, only products with a hose length of 240 mm or more can be installed.

Diagrams show mounting the front fan and front radiator, with an indication to "Install from inside".

9. Cable Connection

Connect the front panel I/O cables to the corresponding headers on the motherboard:

Power Switch (POWER SW): Connects to the motherboard's power switch header.
Power LED: Connects to the motherboard's power LED header (positive and negative terminals).
Reset Switch (RESET SW): Connects to the motherboard's reset switch header.
HDD LED: Connects to the motherboard's HDD LED header.
USB 3.0: Connects to the motherboard's USB 3.0 header.
HD Audio: Connects to the motherboard's HD Audio header.
USB 2.0: Connects to the motherboard's USB 2.0 header.

Diagram illustrates the I/O connectors and their typical motherboard headers.

Warranty Information

Warranty Period

The warranty period is 1 year from the product's manufacturing date (or purchase date if proof of purchase is provided).

Free A/S (After-Sales Service)

Free A/S is provided for defects in product performance within the warranty period.

Paid A/S

Paid A/S is provided for issues arising from product usage after the warranty period.

Product Exchange Conditions

Even within the warranty period, free A/S may not be provided, and charges may apply under the following conditions:

Failure to adhere to the precautions and warnings specified in this user manual before installation.
Modification, damage, or destruction caused by user's intent, negligence, or carelessness.
Modification or malfunction caused by unauthorized modification by the user.
Removal or damage to the warranty sticker.
Malfunction caused by natural disasters.

Product Exchange and Repair: For defects in product performance within the warranty period:

Within 14 days of purchase: 1:1 exchange for a new product (requires proof of components and purchase details).
Within the warranty period: Free exchange and free repair.
After the warranty period: Paid exchange and paid repair.

Parts Retention Period

Parts are retained for 2 years from the product's discontinuation date (or the final shipment date of the discontinued product).

A/S Guidance

1) Operating Hours:

Service Center Operating Hours: 10:00 - 17:00 (Closed on weekends and public holidays)
Consultation Operating Hours: 10:00 - 16:00

2) Submission Methods:

Visit Submission: Apply for A/S after registering as a member on www.zalmansvc.com. Please bring the product you applied for when visiting.
Parcel Submission: Apply for A/S after registering as a member on www.zalmansvc.com. Please send the product via parcel with the address, name, contact number, and symptoms accurately filled out. (Check www.zalmansvc.com for the service center address.)

Shipping Costs

1) Initial Defect: Round-trip shipping costs for initial defects are covered by the company.

2) Free A/S: For free A/S within the warranty period, the customer covers the one-way shipping cost (prepaid).

3) Paid A/S and After Warranty Period: Both round-trip shipping costs are the customer's responsibility.

	ZALMAN S3 / S3 KOR / S3 TG ATX Mid Tower Computer Case User Manual This user manual provides detailed instructions and precautions for installing and using the ZALMAN S3, S3 KOR, and S3 TG ATX Mid Tower computer cases. It covers component specifications, I/O port connections, and step-by-step assembly guides.
	Zalman S3 ATX Mid Tower Computer Case User Manual This user manual provides detailed instructions and safety precautions for installing and using the Zalman S3 ATX Mid Tower Computer Case. It covers component mounting, specifications, and warranty information.
	ZALMAN S2, S2 KOR, S2 TG ATX Mid Tower Computer Case User Manual Official user manual for ZALMAN S2, S2 KOR, and S2 TG ATX Mid Tower computer cases. Features detailed installation guides, component compatibility, specifications, and warranty information.
	Zalman Z9 Neo Plus ATX Mid Tower Computer Case User Manual This manual provides detailed instructions for installing and using the Zalman Z9 Neo Plus ATX Mid Tower Computer Case. It covers component identification, step-by-step installation procedures, I/O port descriptions, and warranty information.
	ZALMAN CHRONIX ATX Mid Tower Computer Case User Manual This user manual provides detailed instructions and safety precautions for installing and using the ZALMAN CHRONIX ATX Mid Tower Computer Case. It includes specifications, accessory lists, and step-by-step installation guides.
	ZALMAN T8 ATX Mid Tower Computer Case User Manual User manual providing installation instructions, safety precautions, specifications, and warranty information for the ZALMAN T8 ATX Mid Tower Computer Case.
	Zalman N5 OF ATX Mid-Tower Computer Case User Manual and Installation Guide Comprehensive user manual and installation guide for the Zalman N5 OF ATX Mid-Tower computer case, detailing features, specifications, and step-by-step assembly instructions.
	ZALMAN T8 ATX Mid-Tower Computer Case User's Manual Comprehensive user's manual for the ZALMAN T8 ATX Mid-Tower computer case, covering installation instructions, safety precautions, specifications, and warranty information.