Lamtto DC22 User Manual

The Camera Introduction

Warm Tips: App features may vary depending on the version. For the most up-to-date instructions, please refer to the in-app guide.

For any questions, please contact support@lamtto.com.

Device Components:

• 1. Speakers
• 2. TF card slot
• 3. SIM card slot
• 4. Reset button
• 5. Microprobe hole
• 6. Charging port
• 7. Hot pattern
• 8. Privacy Mode button
• 9. Power button

Indicator Status Description:

Button Description:

Download, Install APP and Connection

How to Create an Account and Log In:

1. Open the App and tap 'Register Now'.
2. Enter your phone number or email address, then tap 'Next'. If registering via phone number, a verification code will be required.
3. Set your password and tap 'Sign Up' to complete registration.
4. Enter your phone number or email address along with your password to log in.

How to Connect the Camera via Bluetooth:

1. Connect the power cable to the camera. Wait for the indicator light to turn blue, indicating it's ready to connect.
2. Turn on your phone's Bluetooth and tap 'Add Device' in the App.
3. Find the Recorder and click it.
4. Set the Recorder's name and location.
5. Wait for the connection.
6. Device added successfully.

Alternative Connection via QR Code:

1. After connecting the Recorder to the power cable, click "Add Device" in the app.
2. Click "Scan the QR code" in the app to scan the QR code on the Recorder.
3. Confirm the Recorder's status, then click "Next."
4. Set the Recorder's name and location.
5. Wait for the connection.
6. Device added successfully.

Device Components (Front View):

• 1. Fixed spindle
• 2. GPS module
• 3. Fixed bracket
• 4. Equipment Indicator Lights
• 5. Front radar position
• 6. Front camera lens
• 7. Rear radar position
• 8. Rear camera lens

Operating Modes of The Camera

(When the camera is connected to the vehicle's OBD port)

1. Parking Monitoring Mode

When the vehicle engine is turned off, the camera enters Parking Monitoring Mode. Both the radar sensor and G-sensor remain active. The radar sensor triggers for approaching objects, and the G-sensor triggers for vibrations or impacts. The camera will save the event video, upload it to the cloud (subscription required), and send an alert via the app.

Radar detection mode options (set via the app):

• All motion detection
• Human-only detection

2. Driving Mode

When the vehicle is in motion, the camera switches to Driving Mode. Continuous video is recorded. Only the G-sensor is active. If a collision or strong vibration is detected, the video segment is automatically locked and protected from overwriting. Locked footage is also uploaded to the cloud if enabled.

Radar Detection Range

If metal objects block the radar area, detection performance may be reduced. Typical detection distances:

• Front of the vehicle: 3 to 5 meters (standard), up to 1 meter near the windshield.
• Rear of the vehicle: Up to 0.5 meters outside the rear window.

Tips for Best Performance: Ensure the radar sensor is not obstructed. Position the camera according to the installation guide for optimal range.

App Interface Overview

1. Cloud Services: Offers a 30-day free trial. Subscription required for continued use. View recordings remotely under "Cloud Video." Videos are retained during the active subscription period.
2. GPS Positioning System: Open the Monitoring screen, tap the GPS icon to view the vehicle's real-time location.
3. Collision-Activated Recording: The G-sensor automatically locks footage upon detecting a collision.
4. Playback Screen Icon Guide: Includes icons for G-sensor sensitivity (driving and parking), device settings, location, camera switching, full-screen mode, screen capture, recording, microphone, speaker, and video viewing.
5. Add Device: Options to add devices via Bluetooth or QR code scanning.
6. Device list: Quick search, basic settings, monitoring screen access, adding new devices, viewing/editing recorded events, and customer service access.
7. Mine Page: Account management, cloud storage, commonly used features, help center, security & permissions, common settings, and logout.

Frequently Asked Questions (FAQ)

Still need help? Feel free to contact our support team - Email: support@lamtto.com

OBD Port Location Diagram for Common Vehicle Models

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.