Industrial Solutions Guide Download

Industrial Solutions Guide

Chris Christner

Download

PATTON/Fiberplex

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 60 Pages, 2.63MB

JavaScript is disabled. Open the PDF or Download.

IndComms Patton Industrial Solutions Guide

· Enables Ethernet to operate over existing standard phone-grade twisted-pair
· Extends Ethernet up to 5 miles (8 km)
· Line rates up to full-duplex 50 Mbps

· Extend RS-232 over twisted pair, coax or fiber
· Multi-Point and point-to-point
· Optical isolation and surge protection available

· Control, collect, and monitor information from any RS-232, RS-422, or RS-485 device
· Provide secure encrypted connection between your serial devices and IP network
· 1, 4, and 8-port options available
· Environmentally sealed and thermally controlled network equipment
· NEMA 4 rated enclosures with -40 to 85°C operating and starting temperatures
· Serial, T1/E1, and Ethernet models available

· Converters for RS-232, RS-422/RS-485, TTL, current loop, serial/parallel and Ethernet
· No power required · Surge protection available on
some models
· Data taps, line monitors, and gender changers
· Prewired or customized RJ-45, RJ-11, DB-25, DB-9, and more adapter kits available

· Surge protection for RS-232, 422/485, Ethernet, parallel, dial up, and leased line
· Optical isolation for RS232,422/485
· Eliminates the use of expensive coax and extends signal over twisted pair
· No power required · Completely passive
· Allows multiple low speed serial devices to share one communication link
· Configure and control multiple devices with web based management, SNMP or CLI

Ethernet & Audio/Video Extenders

Copper Ethernet Extenders

50 Mbps Multi-Rate Ethernet Extender . . . . . . . . . . .6 16.67 Mbps Multi-Rate Ethernet Extender . . . . . . . . .7 12.5 Mbps CopperLinkTM Ethernet Extender . . . . . . . . . .8 2.3 & 4.6 Mbps Ethernet Extenders with Auto-Rate Adaptation . . . . . . . . . . . . . . . . . . . .9 144 kbps LAN Extender . . . . . . . . . . . . . . . . . . . . .10

CopperLinkTM-T Extenders . . . . . . . . . . . . . . . . . . . .12

IP Network Camera Extender

Ruggedized 50-Mbps IP Network Camera Extender . . . . . . . . . . . . . . . . . . . . . . . . . .11

USB 1.1 Extender Kit

USB 1.1 Extender Kit . . . . . . . . . . . . . . . . . . . . . . .11

513

POTS Leased-Line Extender

Analog 4-Port Leased-Line Extender . . . . . . . . . . . .13

Industrial Networking

EnviroNET Solutions

Extended Temperature Ethernet Extender . . . . . . . .17 Extended Temperature Device Servers . . . . . . . . . .17 Extended Temperature T1/E1 Extenders & Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Extended Temperature xDSL Routers . . . . . . . . . . .17 Extended Temperature VoIP Gateways & Routers . .17

Extended Temperature Serial Extenders . . . . . . . . .17 Environmentally Hardened Ethernet Extenders . . . .17

Ruggedized 50-Mbps Ethernet Extender 18

Ruggedized 50-Mbps Ethernet Extender . . . . . . . . .18

Ruggedized G.703/G.704 NTU

Ruggedized G.703/G.704 NTU . . . . . . . . . . . . . . . .19

1424

Device Servers

Single-Port RS-232 Device Server . . . . . . . . . . . . . . .20 RS-485/422/232 Universal Device Server . . . . . . . .21 Wireless (802.11b) Device Server . . . . . . . . . . . . . . .22 Multi-Port Asynchronous RS-232 Device Servers . . .23 Async. over IP Multi-Port RS-232/422/485 Device Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Multiplexers & Sharing Devices

Multiplexers

26 Miniature 2-Port Statistical Multiplexers . . . . . . . . . .27

8-Port Managed High-Speed RS-232

Modem/Port Sharing Devices

Asynchronous Multiplexer . . . . . . . . . . . . . . . . . . .26 Low-Speed Time Division Multiplexer . . . . . . . . . . .27

Digital Sharing Device . . . . . . . . . . . . . . . . . . . . . .28

2529
Modem Sharing Device . . . . . . . . . . . . . . . . . . . . . .29 Micro Modem Splitter . . . . . . . . . . . . . . . . . . . . . . .29

Mini-Racks, ClusterBoxes, & Universal Mounting Panels

3033

Mini-Rack & Cluster Boxes

30 Universal Mounting Panels

32 16-Slot Universal Mounting Panel . . . . . . . . . . . . . .33

Mini-Rack System and ClusterBoxes . . . . . . . . . . . . .30 10 and 2-Slot Universal Mounting Panels . . . . . . . . .32

Line Drivers

Self-Powered Line Drivers

Basic Point-to-Point Async. SRMs . . . . . . . . . . . . . . .36 Transformer Isolated SRMs . . . . . . . . . . . . . . . . . . .36 High-Speed, Multipoint Short-Haul Modem . . . . . . . .37 Multidrop Transformer-Isolated Async. SRM . . . . . . .38 Sync./Async. SRM . . . . . . . . . . . . . . . . . . . . . . . . .38 High-Speed, SRM (RS-232 & RS-530) . . . . . . . . . . .39

Self-Powered Line Extenders . . . . . . . . . . . . . . . . . .39

Powered Line Drivers

AC Powered, Async. SRM (up to 38.4 kbps) . . . . . . .40 AC Powered, Async. SRM (up to 115.2 kbps) . . . . . .40 Universal SRM . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Industrial SRM for Outdoor Use . . . . . . . . . . . . . . . .42

Fiber Modems

3445 43

Miniature, Async./Sync. RS-232, Fiber Optic Modems . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Wireless Short-Range Modems

RS-232 Bluetooth Wireless Modem 2-Packs . . . . . . .44 EtherBITS Bluetooth IP Access Point . . . . . . . . . . . . .45

Interface & Media Converters

Async./Industial Converters

Interface Powered, RS-232 to RS-485 Interface Converters (Transmit & Receive Data Only) . . . . . . .47 Self-Powered RS-232 to TTL Converter . . . . . . . . . .47 Interface Powered, RS-232 to RS-485 Interface Converters (with Handshaking) . . . . . . . . . . . . . . .48

RS-232 to Current Loop Converters (20 or 60 mA) . .50 RS-232 to 20 mA Current Loop Converters (DB-25 to DB-25) . . . . . . . . . . . . . . . . . . . . . . . . . .50 Auto-Directional Serial to Parallel Converters . . . . . . .51 Compact Interface Serial to Parallel Converters . . . . .51

4653

Video Baluns

CCTV Passive Baluns . . . . . . . . . . . . . . . . . . . . . . . .52 CCTV Passive Pass-Thru Baluns . . . . . . . . . . . . . . . .53 CATV Passive Baluns . . . . . . . . . . . . . . . . . . . . . . . .53

Surge Protectors & Optical Isolators

Data Line Surge Protectors

Async DB-25 Surge Protectors . . . . . . . . . . . . . . . .55 Sync DB-25 Surge Protectors . . . . . . . . . . . . . . . . .55 Sync DB-9 Surge Protector . . . . . . . . . . . . . . . . . .55

Serial DB-25 Surge Protector (All 25 Leads) . . . . . .55 10/100Base-TX (Cat-5) Secondary Surge Protector .55 10/100Base-TX (Cat-5) Secondary Multiport Protectors, Hub and Panel (Rack Mount) Formats . .56

5457

Multiport RS-232 & RS-422 Surge Protectors . . . . .56

Optical Isolators

Asynchronous RS-232 Optical Isolator . . . . . . . . . . . .57 RS-422/485 Optical Isolators . . . . . . . . . . . . . . . . . .57

Adapters and Testers
DB-25 & DB-9 Data Taps . . . . . . . . . . . . . . . . . . . .58 DB-25 Cube Tap . . . . . . . . . . . . . . . . . . . . . . . . . . .58 DB-25 to Modular Adapters . . . . . . . . . . . . . . . . . .58

DB-9 & DB-15 Modular Adapters . . . . . . . . . . . . . .58 Async. Null Modem Adapters . . . . . . . . . . . . . . . . . .59 Loopback Adapter . . . . . . . . . . . . . . . . . . . . . . . . . .59

5859
DB-25 Micro Breakout Box . . . . . . . . . . . . . . . . . . .59 DB-25 PockeTester . . . . . . . . . . . . . . . . . . . . . . . . .59 DB-9 PockeTester . . . . . . . . . . . . . . . . . . . . . . . . . .59

CATALOG

Copper Ethernet Extenders

IP Network Camera Extender

Ruggedized 50-Mbps IP Network Camera Extender . . . . . . . . . . . . . . . . . . . . . . . . . .11

USB 1.1 Extender Kit

USB 1.1 Extender Kit . . . . . . . . . . . . . . . . . . . . . . .11

POTS Leased-Line Extender

Analog 4-Port Leased-Line Extender . . . . . . . . . . . .13

Model

Max. Distance

2172

1 mile (1.6 km)

Max. Speed
50 Mbps

Distance at Rack Max. Speed Card

800 feet (244 m)

2168

1.1 miles (1.8 km)

16.6 3,125 feet Mbps (953 m)

2158

0.75 miles (1.2 km)

12 Mbps

4,000 feet (1,219 m)

2157

5.7 miles (1.8 km)

4.6 Mbps

2 miles (3.2 km)

Photo

8 9

2156

5.7 miles (1.8 km)

2.3 Mbps

3.1 miles (5 km)

2155

5 miles (1.8 km)

144 kbps

5 miles (8 km)

OApptlhicaetiorn dEiatghramernet Extension Applications
Campus LAN Connectivity Secure IP Networks (Dark Fiber) Metropolitan IP Networks Mission-Critical IP Links City LANs Multi-Dwelling, Multi-Tenant
IP Services

Our Full Range of CopperLink Ethernet Extenders
Extend your Ethernet connectivity over existing copper infrastructures with Patton's CopperLink Ethernet Extenders. Whether your requirement is sending Ethernet data over long distances or at high speeds, there is a Patton CopperLink Ethernet Extender for you. Use the table above to select the best model for you. Revitalize your copper today!

Server

Up to 50 Mbps

Hub

2172

NETWORK ACCESS--ETHERNET EXTENDERS COPPER ETHERNET EXTENDERS

Industrial Solutions
PRODUCT GUIDE

See page 30

See Pg 17

50 Mbps Multi-Rate CopperLinkTM Ethernet Extender Model 2172
The CopperLink 2172 breaks both distance and speed barriers with up to 50-Mbps fullduplex and distances of up to 5,500 feet (1,700 meters). Now a single twisted-pair can go the distance without sacrificing speed or cost.
SPECIFICATIONS

FEATURES & BENEFITS
Operates Over Twisted Pair--Reduces the cost and hassles of new installations. Utilizes installed voice-grade twisted pairs to eliminate the expense of fiber or Cat5e cabling.
Full-duplex data-line rate of 100 Mbps--Provides near fiber performance for bandwidth intensive applications such as Triple Play services.

The CopperLinkTM Model 2172 Ultra-High-Speed Ethernet Extender leverages existing copper infrastructure to deliver high-speed Ethernet extension. Providing data rates up to 50 Mbps in each direction for an aggregated full-duplex

CopperLink line interface: RJ-45 (pin 4 = ring; pin 5 = tip)
Ethernet interface: 8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or full-duplex operation. DIP switch capable of disabling 100-Mbps full-duplex for equipment that does not support 802.3X (Pause Packets)
Protocol: Transparent to high layer protocol. Supports 802.1Q VLAN tagging
Modulation: Quadrature Amplitude Modulation (QAM) 4-band
Duplexing Method: FDD (Frequency Division Duplexing)
Frequency Range: CopperLink: 012 MHz
Transmission: CopperLink line rate: Up to 50 Mbps

Surge suppression: CopperLink line maximum current surge: 20kA (8/20µs) gas tube
Front Panel Indicators: Power, Link, Ethernet
Power Supply: External AC and DC options: 120VAC, and universal input (UI)--100240 VAC, or optional -48 VDC, -24 VDC, or -12 VDC
Compliance: FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, LowVoltage Directive 73/23/EEC
Environment: Temp.: 32122°F ( 050°C) Humidity: Up to 90% non-condensing
Dimensions: 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm)
Weight: 0.4 lbs (0.18 kg) without power supply

Plug and Play--No configuration or cable hassles during installation with auto-sensing 10/100, full or half duplex, and auto MDI-X.
Multiple Line Rates Supported--Switch-selectable lines rates ensure the best possible line rate for each application
ORDERING INFORMATION 2172/EUI: 50-Mbps Ethernet Extender, 100240 VAC* 2172/EUI-2PK**: 50-Mbps Ethernet Extender K, 100240 VAC*
Enviromentally Hardened Multi-Rate 50 Mbps CopperLink Ethernet Extender; 100240 VAC ET2172/R/UI: Extended Temp -40 to 85°C Remote Extender EC2172/R/UI: Enviromentally Controlled 0 to 85°C Remote Extender EHA2172/R/UI: Enviromentally Hardened 0 to 50°C Remote Extender
* -12, -24, and -48 VDC power options available. **You must specify a country specific power cord

speed of 100 Mbps, the Model 2172 is the perfect solu-

Model 2172 Extension Distances

tion for delivering triple-play communications services and other bandwidth-intensive applications. CopperLinkTM Ethernet Extenders easily inter-connect remote devices or remote networks to a central LAN for such applications as medical imaging, video-conferencing, Ethernet bridging, Triple Play, and VoIP.

DS/US* Line Settings
50/50 Mbps 25/25 Mbps 10/10 Mbps 4/1 Mbps 16/2 Mbps 50/2 Mbps

Throughput
48 Mbps 24.5 Mbps 10 Mbps 3.75/1 Mbps 15/2 Mbps 48/2 Mbps

26 AWG (0.4 mm)
600 feet (184 m) 1,500 feet (458 m) 3,000 feet (900 m) 4,500 feet (1,373 m) 3,000 feet (900 m) 1,500 feet (458 m)

24 AWG (0.5 mm)
800 (245 m) 2,000 (610 m) 4,000 (1,200 m) 6,000 (1,830 m) 4,000 (1,200 m) 2,000 (610 m)

22 AWG (0.6 mm)
1,000 (306 m) 2,500 (763 m) 5,000 (1,500 m) 7,500 (2,288 m) 5,000 (1,500 m) 2,500 (763 m)

19 AWG (0.9 mm)
1,500 (460 m) 2,750 (1,144 m) 7,500 (2,250 m) 11,250 (3,430 m) 7,500 (2,350 m) 3,750 (1,144 m)

Six user-selectable settings for symmetrical and asymmetrical rates provide the flexibility required to achieve the optimal speed-distance combination for each and every connection. Multi-rate symmetrical line rates allow each connection to be tuned for the length and gauge of the copper wire, in order to achieve the maximum possible data rate for the environment. Multi-rate asymmetrical line rates make the Model 2172 the ideal solution for service providers who want to differentiate their services or extend the reach of their customer base.
Get near-fiber performance without the expense with Patton's Ultra High-Speed CopperLinkTM Ethernet Extender!

Workgroup Ethernet extension application
Model 2172 Extenders provide Ethernet to remote buildings beyond the 328-foot (100-meter) distance limit of Ethernet. 100 Mbps throughput eliminates bandwidth concerns experienced

with other copper wired transmission technologies. By using existing voice grade copper pairs the expense and hassle of installing low capacitance or fiber cable is no longer required.

Extend 10/100Base-TX Ethernet to reach beyond its natural limitations

Remote Office

Up to 800 feet (243 meters) at 50 Mbps over voice-grade twisted-pair

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

NETWORK ACCESS--ETHERNET EXTENDERS COPPER ETHERNET EXTENDERS

16.67 Mbps Multi-Rate CopperLinkTM Ethernet Extender Model 2168

Multi-rate high speed Ethernet extension over voice-grade wire.

necting remote devices or remote networks to a central LAN. The multi-rate symmetrical line rates ensure the highest possible data rate is achieved over various lengths and types of copper wire and environments. Multi-rate asymmetrical line rates make the Model 2168 the ideal solution for service providers who want to differentiate their services or extend the reach of their customer base. The Model 2168 allows service providers to offer unparalleled performance for such applications as always on Internet access, real time bi-directional video streaming, and various multimedia applications.

The Patton Model 2168 Multi-Rate CopperLink Ethernet Extender enables the utilization of existing copper infrastructure for high speed Ethernet extensions at data rates up to 16.67 Mbps. The Model 2168 Ethernet Extender includes seven asymmetrical and symmetrical settings which provide the flexibility to increase the distance or speed of the Ethernet connections.

If you want to take your network and voice connections farther and faster over existing copper and eliminate the expense of fiber, Patton's CopperLink Ethernet Extenders are the products for you!
Just plug it in, power it on, and play!

CopperLink applications include Ethernet extension, medical imaging, video-conferencing, Ethernet Bridging, and inter-con-

See page 30

Workgroup Ethernet extension application 2168
2168
2168 1001R Rack with 2168RC Rack Cards

Ethernet Extender allows copper instead of fiber for vertical Ethernet spans!
These multi-rate Ethernet Extenders are ideal for bridging Ethernet spans inside buildings that are beyond the 328-foot (100-meter) distance limit of Ethernet.
For example, connecting workgroups located on different floors in a building no longer requires expensive switches or the installation of low capacitance cable.

SPECIFICATIONS
Line Interface: RJ-45 or terminal block Ethernet Interface: Shielded RJ-45 POTS-ISDN Interface: RJ-45 (pin 4=ring, pin5=tip) Transmission: Switch selectable async. and sync. line rates up to 16.67 Mbps

Surge suppression: CopperLink 20kA (8/20s) gas tube Power Supply: External AC: UI (100240); DC: -48,-24, and -12; DC power supplies are optional
Dimensions: 1.5H x 4.13W x 3.75D in. 3.81H x 10.5W x 9.53D cm)
Weight: 0.4 lbs (0.18 kg) without power supply

FEATURES & BENEFITS Low cost/plug and play solution for campus wide net-
work extension and delivery of last-mile ISP services over Ethernet
Switch selectable asymmetrical or symmetrical line rates up to 16.67 Mbps!
Auto-sensing 10Base-T/100Base-TX port
Supports full or half-duplex Ethernet
Transparent LAN bridging (Passes 802.1Q (VLAN) packets)
Automatic learning, aging, & filtering source address table
Stand alone and rack mount versions

Symmetric or asymmetric variable-rate VDSL

Line rates can be set on the standalones and rack cards to differentiate services and increase the distance of the individual links.

Asymmetric

Line Rates

Distance

Upstream Downstream 26 AWG (0.4 mm)

1.56 Mbps

4.17 Mbps

6,000 feet (1,829 m)

1.56 Mbps

9.38 Mbps

5,500 feet (1,676 m)

2.34 Mbps

16.67 Mbps 5,000 feet (1,524 m)

Symmetric

Line Rates

Distance

Upstream Downstream 26 AWG (0.4 mm)

6.25 Mbps

4,500 feet (1,372 m)

9.38 Mbps

4,150 feet (1,265 m)

12.50 Mbps

12.50 Mbps 4,000 feet (1,220 m)

16.67 Mbps

16.67 Mbps 3,300 feet (1,006 m)

ORDERING INFORMATION 16.67 Mbps Ethernet Extender; 100240 VAC 2168/L/EUI: Local Extender; RJ45 Line 2168/R/EUI: Remote Extender; RJ45 Line 2168/L/TB45/EUI: Local Extender; RJ45 Line + Terminal Block 2168/R/TB45/EUI: Remote Extender; RJ45 Line + Terminal Block

16.67 Mbps Ethernet Extender Kit; 100240 VAC 2168/EUI-2PK: Local & Remote Extenders; RJ45 Line
2168/TB45/EUI-2PK: Local & Remote; RJ45 Line + Terminal Block

Environmentally Hardened 16.67 Mbps CopperLink Ethernet Extender; 100240 VAC ET2168/R/UI: Extended Temp -40 to 85°C Remote Extender
EC2168/R/UI: Environmentally Controlled 0 to 85°C Remote Extender
EHA2168/R/UI: Environmentally Hardened 0 to 50°C Remote Extender

16.67 Mbps Ethernet Extender Rack Card 2168RC/L: Local Extender; RJ45/TB line
2168RC/R: Remote Extender; RJ45/TB line

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

NETWORK ACCESS--ETHERNET EXTENDERS COPPER ETHERNET EXTENDERS

Industrial Solutions
PRODUCT GUIDE

See page 30

12.5 Mbps CopperLinkTM Ethernet Extender Model 2158

Efficient and cost-effective Ethernet extension over voice-grade wire. over your existing voice-grade telephone wire, eliminating the cost of installing new LAN-grade cable or expensive fiber.

CopperLinkTM Ethernet Extenders are compact, easy to install, and transparent to higher layer protocols. The CopperLink Ethernet Extenders will auto-sense and configure for 10Base-T or 100Base-TX as well as full or halfduplex Ethernet operation. No configuration is required!

The Patton CopperLinkTM Ethernet Extender offers the fastest, most efficient and reliable solution for connecting 10/100Base-TX Ethernet LANs. With a line rate of 12.5 Mbps, the Patton Model 2158 offers premium performance

Whether you are looking to make your network connections go farther and faster, increase the efficiency of your existing wiring infrastructure, or just simply extending your LAN, Patton's CopperLinkTM Ethernet Extender is one of the most simple and cost-effective solutions around!

FEATURES & BENEFITS Overcomes the 328-ft (100-m) limitations of Ethernet 12.5 Mbps line rate Auto-sensing 10/100Base-TX port Transparent LAN Bridging Supports 802.1 Q VLAN tagging Auto-sensing full or half duplex

Approximate Distances at 12.5 Mbps

Wire Gauge

Distance

26 AWG (0.4 mm)

3856 feet (1.18 km)

24 AWG (0.5 mm)

4656 feet (1.42 km)

22 AWG (0.6 mm)

5256 feet (1.60 km)

20 AWG (0.8 mm)

5556 feet (1.69 km)

18 AWG (1.00 mm)

5756 feet (1.75 km)

16 AWG (1.29 mm)

5856 feet (1.78 km)

Back-to-Back Extension Application

Ethernet

Model 2158/L

Twisted Pair (2 Wire)

Model 2158/R

12.5 Mbps at 4,500 ft (1.372 m), 24 AWG (0.5mm)

Crossover Ethernet cable (up to 328 ft or 100m)

Model 2158/L

Twisted Pair (2 Wire)

Model 2158/R

12.5 Mbps at 4,500 ft (1.372 m), 24 AWG (0.5mm)

Ethernet

SPECIFICATIONS

CopperLink Interface: RJ-45 (pin 4=TIP; pin 5=RING) and two-position terminal block (supports 1926 AWG)
Ethernet Interface: Shielded RJ45. Auto-sensing 10/100Base-TX with half or full-duplex operation
Protocol: Transparent to high layer protocols. Supports 802.1Q VLAN tagging
Transmission: CopperLink line rate: 12.5 Mbps; Data rate: 10 Mbps
Surge Suppression: CopperLink maximum current surge: 20kA (8/20s) gas tube
External Power Supply Options: · Universal Power Supply
(100240 VAC)
· DC: -48 VDC, -24 VDC, and -12 VDC (optional upon request)

Compliance: FCC Part 15 Class A; EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC; CE Mark Op. Temp.: 32122°F (050°C) Dimensions: · Standalone:
1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm) · Rack card: 3.0H x 0.83W x 7.84D in. (7.6H x 2.1W x 19.9D cm) Weight: · Standalone: 0.4 lbs (0.18 kg) without power supply · Rack card: 0.3 lbs (0.14 kg) with rear card

ORDERING INFORMATION
12.5 Mbps CopperLink Ethernet Extender 2158/L/EUI: Local Extender; RJ45 Line; 100240 VAC 2158/R/EUI: Remote Extender; RJ45 Line; 100240 VAC
12.5 Mbps CopperLink Ethernet Extender Kit 2158/EUI-2PK: Local & Remote Extenders; RJ45 Line; 100240 VAC
Environmentally Hardened 12.5 Mbps CopperLink Ethernet Extender EHA2158/UI: Enviromnetally Hardened (external connector), 0 to 50°C Remote Extender; 100240 VAC
Rack Card 12.5 Mbps CopperLink Ethernet Extender 2158RC/L: Local Extender; RJ45/TB line 2158RC/R: Remote Extender; RJ45/TB line

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

I'm John, one of Patton's Ethernet Extenders Product Group Managers. If you do not find what you need at www.patton.com or in this catalog please call me at +1 301.975.1000, x160. You can also send e-mail to jgrant@patton.com.

Industrial Solutions
PRODUCT GUIDE

NETWORK ACCESS--ETHERNET EXTENDERS COPPER ETHERNET EXTENDERS

See page 30

2.3 & 4.6 Mbps CopperLinkTM Ethernet Extenders with Auto-Rate Adaptation Models 2156 & 2157

High speed/long-distance LAN extension over copper wires.
LAN extension doesn't have to be expensive or difficult. The Auto-Rate Adaptive LAN Extenders are easy to use and take advantage of the existing copper twisted-pair infrastructure to connect LANs at rates up to 4.6 Mbps.

Whether it's connecting corporate LANs or remote offices, the CopperLink is the simple solution for ensuring the best combination of speed and distance in the industry. Many LAN extenders are set for a single rate, or require difficult configurations in order to connect LANs at different distances. With it's auto-rate adaptation feature, the Models 2157 and 2156 ensure that users get the highest speed possible for the distances they are trying to reach. To make it even simpler to use, the Models 2157 and 2156 come with a built in MDI-X switch to allow easy connection to

LANs or PCs with no need for worrying about whether you have a cross-over cable or not. Setup consists of connecting the Ethernet port, connecting the copper twisted pair, and powering up the units!

ORDERING INFORMATION
2156/L/EUI: CopperLink Ethernet Extender, (Local unit), 90260 VAC UI
2156/R/EUI: CopperLink Ethernet Extender, (Remote unit), 90260 VAC UI
2156/EUI-2PK: CopperLink Ethernet Extender, (Local and Remote units), 90260 VAC UI

2157/L/EUI: Auto-Rate CopperLink Ethernet Extender, Local unit), 90260 VAC UI
2157/R/EUI: Auto-Rate CopperLink Ethernet Extender, (Remote unit), 90260 VAC UI
2157/EUI-2PK: Auto-Rate CopperLink Ethernet Extender, (Local and Remote units), 90260 VAC UI

FEATURES & BENEFITS
Auto-rate adaptation gives the highest rate possible for for the extension distance of your network
Model 2156: 2.3 Mbps over just a single twisted pair of copper
Model 2157: 4.6 Mbps over just a single twisted pair of copper
Extension distances up to 32,000 feet (10 km) Auto-sensing 10/100 Ethernet port Integrated MDI-X switch to allow easy connection to any
computer or LAN Auto-sensing full or half-duplex operation Support for 802.1 Q VLAN tagged packet transmission

SPECIFICATIONS

Protocol: Transparent to higher layer protocols. Supports 802.1 Q VLAN tagged packet transmission
Transmission Line: Single twisted pair
Line Rates: 2156: Auto-Rate adaptive from 64 kbps to 2.3 Mbps · 2157: Auto-Rate adaptive from 64 kbps to 4.6 Mbps
DTE Rates: 2156: All 64k steps from 64 to 2304 kbps · 2157: All 64k steps from 64 to 4608 kbps
Line Coding: TC-PAM LED Status Indicators: WAN: Link, TD, RD, Ethernet: Link, 10/100, TD, RD, Power

Connectors: RJ-11 on copper line side, RJ-45 for Ethernet connection, shrouded male IEC320 power connector;
Power: External 90260 VAC, 5060 Hz (Universal Input), 10 W. external 4060 VDC, 10W (DC option)
Line Interface: Transformer coupled, 1500 VAC isolation.
Compliance: FCC Part 15, CE Mark per EMC directive 89/336/EEC and Low Voltage Directive 73/23/EEC, UL1950 UL and cUL listed (Rev A: Listing in process)
Op. Temp.: 32122°F (050°C) Humidity: 595%, non-condensing Altitude: 015,000 ft (04,600 m) Dimensions: 7.3 x 6.6 x 1.62 in. (185 x 168 x 41 mm)
Weight: 2.0 lbs (1.0 kg)

Corporate Campus application

The Auto-Rate

Model 2157

adaptive CopperLink
Twisted
Pair Ethernet Extenders

ensure that the best

speed/distance is

2.3 Mbps at 3.1 miles (5 km)

Model 2156
4.6 Mbps at 2 miles (3.2 km)

achieved for each LAN extension

Twisted Pair

Model 2157

Model 2156

Model 2157 Line Rates Model 2156 Line Rates

Models 2156 & 2157 Extension Distances

DSL line

No Noise

rate 26g (0.4 mm) 24g (0.5 mm) 22g (0.6 mm) 20g (0.8 mm) 19g (0.9 mm)

N kbps miles km miles km miles km miles km miles km 3 200 4.4 7.2 5.7 9.4 8.0 13.1 10.3 16.8 12.1 19.7 6 392 4.0 6.6 5.4 8.8 7.5 12.3 8.7 15.8 10.8 17.5 8 520 3.8 6.2 5.1 8.3 7.1 11.6 9.2 14.9 9.7 15.8 12 776 3.5 5.6 4.6 7.5 6.0 9.8 7.8 12.7 8.8 14.3 18 1160 3.0 4.9 4.0 6.4 5.2 8.4 6.7 11.0 7.5 12.3 24 1544 2.8 4.6 3.7 6.1 4.9 7.9 6.4 10.3 6.7 11.0 32 2056 2.5 4.0 3.3 5.3 4.2 6.9 5.6 9.0 5.9 9.6 36 2312 2.3 3.8 3.1 5.0 4.0 6.6 5.3 8.6 5.6 9.1 42 2696 2.3 3.7 3.0 5.0 4.0 6.4 5.2 8.4 5.5 8.9 48 3080 2.2 3.6 3.0 4.8 3.9 6.3 5.0 8.2 5.4 8.7 54 3464 2.1 3.4 2.7 4.5 3.6 5.8 4.7 7.6 4.9 8.8 60 3848 1.9 3.1 2.5 4.1 3.3 5.3 4.3 7.0 4.5 7.4 66 4232 1.7 2.8 2.3 3.7 2.9 4.8 3.9 6.3 4.1 6.6 72 4616 1.5 2.5 2.0 3.3 2.6 4.2 3.4 5.5 3.6 5.9

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

NETWORK ACCESS--ETHERNET EXTENDERS COPPER ETHERNET EXTENDERS

Industrial Solutions
PRODUCT GUIDE

144 kbps, LAN Extender Model 2155

The perfect LAN extender for those long haul applications.

There are many applications for long distance LAN extension that do not require ultra-high rates. The Model 2155 is perfect for just those applications. You can connect these modems up to 5 miles (8 km) apart on a single copper twisted-pair without changing the data rate. Just plug them in and power them up, and they take care of the rest. Lots of LAN extenders require you to set up the rate and vary the data rate based on the distance. Not these modems--connect them up and you get the maximum rate at any distance up to their maximum reach of 5 miles (8 km).
The 2155 LAN extenders are completely transparent to higher level protocols, like VLAN tagging, enabling these extenders to fit into almost any location where cost-effective LAN

extension is needed. If there is ever a problem, the easy-toread LEDs and built-in diagnostics make it a snap to verify operation. When you need the same connection to all your remote LANs, use the Patton 2155.

Typical applications

Model 2155

LAN Extension Using Existing Copper Twisted Pair

FEATURES & BENEFITS Extend your network up to 5 miles (8 km) 144 kbps using twisted pair of copper Plug-and-play--No configuration necessary! 10Base-T full or half-duplex Ethernet port Support for 802.1 Q VLAN tagged packet transmission LEDs provide quick status at a glance Test mode switch makes troubleshooting easy Convenient standalone desktop model

SPECIFICATIONS

Data Rate: 144 kbps Diagnostics: V52 compliant (511/511E) pattern generator and detector with error injection mode and Remote Loopback control by a single front panel switch.
LED Status: Copper Link, 10BT Link, Ethernet Status, No Signal, Error, Test Mode
Power: External desk top transformer, 90260 VAC, 5060 Hz (Universal Input), 10 W or -48 VDC; shrouded male IEC-320 power connector
Transmission Line: Single Twisted Pair of Copper
Line Coding: 2B1Q Line Interface: Transformer coupled, 1500 VAC isolation
Physical Connection: RJ-45, 2 wire, polarity insensitive pins 4 and 5
LAN Connection: RJ-45, 10BaseT 802.3 Ethernet
Protocol: Transparent to higher layer protocols. Supports 802.1 Q VLAN tagged packet transmission

Address Aging: Entries are deleted after 8 minutes of inactivity
LAN Address Table: 4096 MAC Addresses
Frame Latency: 1 Frame Frame Buffer: 512 Frames Physical Connection: RJ-45, pin 1 Tx Data +, pin 2 Tx Data -, pin 3 Rx Data +, pin 6 Rx Data +pins 4,5,7,8 no connection
Compliance: FCC Part 15, CE Mark per EMC directive 89/336/EEC and Low Voltage Directive 73/23/EEC, CTR 1, UL1950 UL and cUL listed (Rev A: Listing in process)
Op. Temp.: 32122°F (050°C) Dimensions: 4.1 x 5.5 x 1.6 in. (105 x 140 x 41 mm)
Weight: 1.6 lbs (0.7 kg)

1 mile (1.6 km) at 144 kbps

5 miles (8 km) at 144 kbps

2-Wire Distance Table in miles (km)

Data

AWG Wire Gauge (mm)

Rate 19 (0.9) 22 (0.6) 24 (0.5) 26 (0.4)

All rates 10.8 (17.2) 7.2 (11.5) 7.2 (11.5) 5.0 (8.0)

Model 2155

ORDERING INFORMATION
2155/L/UI: CopperLink 144 kbps Ethernet Extender, (local unit), 90260 VAC UI
2155/R/UI: CopperLink 144 kbps Ethernet Extender, (Remote unit), 90260 VAC UI
2155/UI-2PK: CopperLink 144 kbps Ethernet Extender, Local and Remote units), 90260 VAC UI

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

NETWORK ACCESS--ETHERNET EXTENDERS COPPER ETHERNET EXTENDERS

IP Network Camera Extender Model 1173

Patton's plug-and-play IP Network Camera Extender enables users to place IP cameras almost 20 times farther away than the standard distance of 328 ft (100 meters) over standard phone-grade twisted-pair.
line extension provides a secure and reliable connection without needing a clear line of sight. Dependable performance and streaming rates up to 50 Mbps, the Model 1173 is the perfect solution for transporting high resolution security video footage.

The Patton Model 1173 IP Network Camera Extender enables streaming video rates of up to 50 Mbps over ordinary phone grade twisted pair. Unlike wireless, wire-

While the device is plug-and-play, the Model 1173 features three user-selectable settings for line rates providing flexibility in achieving the optimal video resolutiondistance combination. The Model 1173 is completely transparent to protocols, codecs, and applications ensuring compatibility with any IP camera and its management software.

SPECIFICATIONS
CopperLink line interface: RJ-45 (pin 4 = ring; pin 5 = tip) Ethernet interface: 8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or full-duplex operation. DIP switch capable of disabling 100-Mbps full-duplex for equipment that does not support 802.3X (Pause Packets) Protocol: Transparent to high layer protocol. Supports 802.1Q VLAN tagging

Modulation: Quadrature Amplitude Modulation (QAM) 4-band
Duplexing Method: FDD (Frequency Division Duplexing)
Frequency Range: CopperLink: 012 MHz
Transmission: CopperLink line rate: Up to 50 Mbps
Surge suppression: CopperLink line maximum current surge: 20 kA (8/20 µs) gas tube

Front Panel Indicators: Power, Link, Ethernet
Power Supply: External AC and DC options: 120 VAC, and universal input (UI)--100240 VAC, or optional 48 VDC, -24 VDC, or -12 VDC
Compliance: FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC
Environment: Temp: -10 to 70°C

Humidity Standard: Up to 90% non-condensing
Conformal Coated: 85% condensing humidity from -10 to 35°C
Dimensions: 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm)
Weight: 0.4 lbs (0.18 kg) without power supply

FEATURES & BENEFITS Extend high resolution IP video up to 6,000 feet
(1,829 meters) over telephone-grade twisted-pair cabling
Fully compatible with any IP camera and its managing software
Fully transparent to compression schemes such as WMV, MPEG-4 and MJPEG
Fully transparent to your camera's application software
Wall or DIN mountable
Plug and Play
Operating temperature of -10 to 70°C

Line Rates (AWG 24/0.5 mm)

Mbps

Distance in feet (meters)

6,000 (1,830)

4,000 (1,200)

2,000 (610)

ORDERING INFORMATION
Model 1173R/EUI-2PK: IP Network Camera Extender Kit -10 to 70°C ; UI
Model 1173R/C/EUI-2PK: IP Network Camera Extender Kit; -10 to 70°C , conformal coated (humidity 85% condensing from -10 to +35°C); UI

USB 1.1 Extender Kit Model 110
Extends the distance of a USB device to a host computer up to 196 feet (60 m) over Cat5e cable
Patton's Model 110 overcomes USB length limitations of 16 feet so that you have the flexibility to locate your USB printer, camera, web cam or any other USB device where you want them. The Model 110 extends the distance of a USB device to a host computer up to 196ft (60m) over Cat5e. The 110 is plug-and-play with absolutely no special software or drivers to install.
ORDERING INFORMATION 110-KIT: USB Extender Kit 0805XXX: USB Power Supply

FEATURES & BENEFITS Fully compliant with USB 1.1 specifications Provides support for any full speed (12 Mbps) or low
speed (1.5 Mbps) USB devices No software required USB LED indicator for quick glance status checks

SPECIFICATIONS

USB: Fully compliant to USB 1.1 Rates: Full speed (12 Mbps)/Low speed (1.5 Mbps) Connector: · Local Unit: USB Type A Male; RJ-45 · Remote Unit: USB Type A
Female; RJ-45 Active Pins: Power 1 & 4; Data 2 & 3 Distances: · Cat 5: non-powered 98 ft (30m)

· Cat 5: powered 165ft (50m) · Cat 5e/6: non-powered 196 feet
(60 m) · Cat 5e/6: powered 263 feet (80 m)
Operating temp.: 32 to 104°F (0 to 40°C)
Storage temp.: -40 to 185°F (40 to 85°C)

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

NETWORK ACCESS--ETHERNET EXTENDERS COPPER ETHERNET EXTENDERS

Industrial Solutions
PRODUCT GUIDE

See page 30

CopperLinkTM-T T1/E1 Extender Models 2113 & 2115

This transparent, plug-and-play T1/E1 Extender solves the distance and wire limitations of TDM technology by tripling the reach and halving the number of required wire pairs.
them on either side of the dry copper pair, connect your T1 or E1 device and the circuit will light up immediately!

Model 2113
Model 2113 & 2115 T1/E1 Extenders are the perfect choice for enterprises, integrators, and service providers needing to extend T1 and E1 circuits beyond their typical reach while conserving the number of wire pairs used.

The Model 2113 extends E1 circuits to 16,100 feet (4,900 meters, nearly 5 km) while the Model 2115 extends T1 circuits to more than 3.5 miles (18,500 feet or 5,600 meters). Both models require only two wires (one pair) to extend the TDM circuits, thereby conserving and minimizing the copper plant resources used.
For these reasons, the CopperLinkTM-T extenders are the ideal solution for most popular applications such as T1/E1 backhaul from a remote site, T1/E1 relocation, T1/E1 extension across a campus or between buildings, and last-mile TDM delivery.

With the CopperLinkTM-T extenders, zero configuration is required. They operate in clear-channel mode, thereby facilitating the transparent extension of data and voice bearing circuits--including the F-bit on T1 circuits. The two active pins on the RJ connector are polarity insensitive, so you don't even need to worry about which wire you connect on the line interface. Simply take them out of the box, put

Model 2115

Typical applications

Main Office

Cell tower facility

Up to 16,100 ft/4,900 m (E1) over voice-grade twisted-pair

FEATURES & BENEFITS
Triple the Distance--Extend T1s to over 3 miles and E1s to almost 5 km over one pair of wires.
Half the Wires--The T1/E1 extenders only require one pair of wires to operate.
Voice and Data Extension--The T1/E1 Extenders operate in clear channel mode allowing the transparent passing of both voice and data.
Plug and Play--Plug them in and the link comes up in seconds. The line interface is even polarity insensitive, making it easier to get running.
Line Tests--V.52 511/511E Pattern generator with remote digital loopback (RDL); local analog loopback (LAL).
Front Panel Status Indicators--Front panel LEDs provide users with quick feedback on unit operation.

SPECIFICATIONS

Circuit Connector: Model 2113 E1 Extender: Dual 75-Ohm female BNC and single 120-Ohm female RJ-48C · Model 2115 T1 Extender: Single female RJ-48C Supported Line Tests: V.52 511/511E Pattern Generator with RDL; LAL
Clocking: CO unit preset for Network Clock, CPE unit preset for Receive Recover
Line Coding: 16-constellation TC-PAM
Line Interface: Female RJ-11 using pins 2 & 3; Two wires (single twisted-pair)
Front Panel Indicators: Power--Solid green indicates unit is powered up. Slow blinking indicates unit is in POST. Fast blinking indicates unit failed POST. Dark indicates unit does not have power.

Link--Solid green indicates end-toend link. Flashing indicates unit is training. Dark indicates link is down.
Frame--Solid green indicates valid framing. Flashing indicates signal being received, but no link established.
Power Supply: External power supply options: Universal 90260 VAC operating from 5060 Hz; 120 VAC/60 Hz; 240 VAC/60Hz; -48 VDC
Compliance: FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, LowVoltage Directive 73/23/EEC
Operating Temp.: 32122°F (050°C) Humidity: 590% non-condensing Dimensions: 4.7 x 1.52 x 5.0 in. (10.6 x 3.9 x 12.7 cm)

I'm Antoine, Patton's MEA Regional Manager. If you have any questions about products or applications using Ethernet Extenders, please call me at +1 301.975.1000, x251, or send e-mail to antoine@patton.com.

Model 2113

Up to 18,500 ft/5,600 m (T1)

over voice-grade twisted-pair

Large PBX

PBX

ORDERING INFORMATION 2113/EUI-2PK: CopperLink-T, E1 Extender, 2 pack 2113/L/EUI: CopperLink-T E1 Extender, Local unit 2113/R/EUI: CopperLink-T E1 Extender, Remote Unit 2115/EUI-2PK: CopperLink-T T1 Extender, 2 pack 2115/L/EUI: CopperLink-T T1 Extender, Local unit 2115/R/EUI: CopperLink-T T1 Extender, Remote unit

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

NETWORK ACCESS--ETHERNET EXTENDERS POTS LEASED-LINE EXTENDER

Analog Leased-Line Extender Models 2292 & 2294

Save leased-line costs extending up to four audio lines between two locations over any IP network. Patton's leased-line extenders provide PSTN grade voice quality and integrated QoS mechanisms enable it to work reliably even over the public Internet.
The Extenders ship as a matched pair--and after installation, the connection between the two establishes immediately. It also re-establishes after any kind of problem, should it be needed. The connection is secured with hardware-accelerated 3DES or AES encryption end-to-end between the Extenders, preventing wiretapping and making Patton the right choice for security conscious enterprises.

The Leased-Line Extender product family gives you the ability to save big on Leased-Line costs. Using only one Extender on each side, audio information on up to four Leased-Lines can be transported over a packet-based network. This means: Internet access in two different locations around the world is sufficient to establish up to four Leased-Lines between these two locations!

For advanced users, the Extenders can be bought separately, and multiple Extenders can be arranged in a multi-location formation. This allows e.g. always-on direct intercom between different locations or posts. The integrated SIP and H.323 voice-over-IP (VoIP) protocols enable any VoIP phone system to talk to the Extenders--finally offering real audio interfaces. An intelligent agent inside the Patton 2292 and 2294 can assure the VoIP calls are always up.

The 2292 and 2294 extend leased lines over any IP network

Leased-Line Interface

Model 2294

IP Network

Model 2294

Leased-Line Interface

The 2292 and 2294 provide audio interfaces to any VoIP system

FEATURES & BENEFITS
Security--Connections are always-on and securely encrypted with IPsec and IKE. Choose DES/3DES or AES.
Quality--Advanced traffic management and shaping, combined with Patton's patent-pending DownStream QoSTM enforce uninterrupted toll-quality voice over besteffort networks.
Integrated access router with NAT, Firewall, ACL, PPPoE, DHCP, DynDNS and VLAN
Connects analog 2-wire 600-ohm voice-grade interfaces via a G.711 RTP stream.
Narrow-band FXS style 2-wire hybrid T/R.
Talks SIP and H.323--adds real audio interfaces to SIP and H.323 signaling systems.

SPECIFICATIONS

Capacity: 2 audio lines (2292) 4 audio lines (2294)
Audio connectivity: 2-wire RJ11, Bandwidth 4kHz, Impedance 600ohm, Narrow Band FXS style hybrid transmit/receive
Data Services: Two 10/100 Ethernet ports · Complete IP access router · DHCP Client & server · Packet fragmentation · Static firewall, NAT, NAPT RFC 1631 access control lists · DMZ port · IPsec, IKE, AES/DES/3DES Encryption
Quality of Service: Audio priority · DownStreamQoSTM · Traffic management, shaping and policing · IEEE 802.1p, TOS, DiffServ labeling · IEEE 802.1Q, VLAN tag insertion/deletion (simultaneous support of multiple VLANs)
Voice Signaling: H.323v4, SIPv2 (B2BUA capable, multi-instance, simultaneous
support of multiple registrars and direct IP dialing) · SIP call transfer, redirect · DTMF in-band & out-of-band

Voice Processing: CODEC G.711 a-law/mu-law, G.723, G.729ab, · G.726, G.727. T.38 fax relay (9.6 k, 14.4k) · G.711 transparent fax and bypass
Management: Web/HTTP, CLI with local console and remote Telnet access · TFTP configuration & firmware loading · SNMP MIB II and product MIB · Secure Mass provisioning for both firmware and unit configuration · Built-in diagnostic tools (trace, debug, call generator)
System: CPU Motorola MPC875 @66MHz · Memory 32MB SDRAM/8MB Flash · Power 100240 VAC (50/60Hz) · Power dissipation 48W, model dependent
Temperature: 32104°F (040°C)
Humidity: 580%, non-condensing
Compliance: EMC compliance: EN55022 and EN55024 · Safety compliance: EN 60950 · CE compliance · FCC Part 15 Class A · RoHS

M-ATA

POTS Phone SIP Phones

Ethernet

IP PBX

Model 2294

ORDERING INFORMATION
2292/EUI-2PK: Dual port 2-wire Leased-Line audio over IP Extender, dual 10/100 Ethernet, UI power. Package contains two matched units.
2294/EUI-2PK: Quad port 2-wire Leased-Line audio over IP Extender, dual 10/100 Ethernet, UI power. Package contains two matched units
2292/EUI: Dual port 2-wire Leased-Line audio over IP Extender, dual 10/100 Ethernet, UI power. Single unit for integration in existing SIP or H.323 networks
2294/EUI: Quad port 2-wire Leased-Line audio over IP Extender, dual 10/100 Ethernet, UI power. Single unit for integration in existing SIP or H.323 networks.

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

Ethernet is no longer a stranger to the Industrial Community. Ethernet's low cost, reliability, flexibility, and ease to migrate to more bandwidth intensive applications makes it a clear choice over traditional serial communications. Patton offers a wide variety of products to meet these industrial Ethernet requirements. Patton's product line includes device servers, Ethernet LAN drivers, wireless networking, Ethernet/PoE Ethernet surge protectors, and a full range of NEMA 4 and extended temperature products.

Wireless Management System

EtherBITSTM Device Servers--Control, monitor, and collect RS-232/422/485 over an Ethernet LAN

CopperLinkTM Ethernet LAN Drivers--Extends Ethernet over standard grade twisted pair over its 328 feet (100 meters) limitation at lines rates as high as 50 Mbps.

Wireless Networking--Extend RS-232 serial devices over Bluetooth, or control, monitor, and collect RS-232 data over 802.11b WiFi.

Model 2211 RS-232 to 802.11b
Device Servers

LAN Protectors--Protects valuable Ethernet and PoE Ethernet device from surges RS-232

See page 22

RS-232

EnviroNETTM--Ethernet extenders, device servers, multiplexers, T1/E1 exten-

PLC

ders, VoIP gateways and routers all meeting NEMA 4 (IP65) and -40 to 185°F

PLC

(-40 to 85°C) specifications.

Router Switch PBX

Console Ports

Model 2172

See page 6

50-Mbps Ethernet Extension

Model ET2172

See page 17

See page 23
Model 2234
4-Port RS-232 Device Server
Outdoor Security IP Camera

8-Port RS-232/422/485 Device Server

See page 24

Model 2288

Model 570 Surge Protector

RS-485

· · ·

RS-485

See page 55

Bench Scale

Label/Printer System

Management System

See page 44

Remote Management Station

Model 1013

Model 1013 RS-232 to Bluetooth Modem

1:1

Model 1013

PLC

See page 44

1: Many

See page 45

PLC
Model 2188 Bluetooth Access Point

EnviroNET Solutions

Ruggedized 50-Mbps Ethernet Extender 18

Ruggedized 50-Mbps Ethernet Extender . . . . . . . . .18

Ruggedized G.703/G.704 NTU

Ruggedized G.703/G.704 NTU . . . . . . . . . . . . . . . .19

Device Servers

RS-232

Async over IpStatmux Model 3038

CPU

See page 25

See page 19

Model 2701R

WWW

Terminals
See page 19

Terminals Model 2701R

Model 3038

Async over IpStatmux
See page 27

EnviroNETTM EH Series
Environmentally Hardened
Built to NEMA 4 specs, the durable EH Series protects against rain, sleet, snow, dirt, dust, ice build-up, high humidity (moisture) and physical tampering. Able to operate in temperatures ranging from 32 to 122°F (0 to 50°C), it is ideal for use in environments with controlled temperatures.

NEMA 4 case protects against elements such as dirt, rain, sleet, snow, dust, and the external formation of ice on the enclosure.

NEMA 4 self-sealing brass cable glands for network connections
and power feeds
Coupling ring, screw thread provides
secure cable coupling

Shroud for RJ-45 provides protection against damage through misuse and positive alignment for mating of connectors

Sealing gland and cage optimized to maintain IP68 seal and provide secure cable restraint without disrupting signal

EnviroNETTM EC Series
Environmentally Controlled
The EC Series offers the same protection from environmental elements as the EH Series, plus it has a temperature control system enabling it to operate in temperatures ranging from 32 to 185°F (0 to 85°C).

EnviroNETTM ET Series
Extended Temperature
In addition to providing the same protection from environmental elements as the EH Series, the advanced ET Series temperature control system enables it to operate in temperature extremes of -40 to 185°F (-40 to 85°C). Potential installation locations and applications for the ET Series are virtually limitless!

Alarm and Power LEDs

-40 to 85°C operation allows virtually any Patton device to operate in environments that
do not have heating or cooling options

Mating connectors install kit included

Panel gasket maintains

IP68 seal to panel

`O' ring maintains IP68 seal at connector interface

Shielded CAT5e coupler maintains screening

NEMA 4 case protects against elements such as dirt, rain, sleet, snow, dust, and the external formation of ice on
the enclosure

NEMA 4 self-sealing brass cable glands for network connections
and power feeds

Provisioning for a padlock

Environmentally hardened and extended temperature solutions for extending Ethernet connections at distances up to 5 miles (8 km) over phone-grade twisted-pair!

The Patton EnviroNETTM Ethernet Extender offers a reliable and robust solutions for connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment; or delivering last-mile ISP services-- at line rates up to 50 Mbps! Patton's EnviroNET allows the Ethernet Extenders to operate under harsh temperatures of -40 to 185°F (-40

to 85°C) and resist various environmental elements such as dust, rain, snow, sleet, etc. Just co-locate an EnviroNET Ethernet Extender at any outdoor data acquisition location and pair it up with an equivalent Patton Ethernet Extender inside the building.

Security gate, IP keycode entry system

See page 9

IP camera on light post

1.3 miles (2.1 km) at 4/1 asymmetrical
2-wire-twisted pair

ET2172/R

2172/L

2173R

2000 feet (610 m) at 50 Mbps
2-wire-twisted pair

ET1173

EnviroNETTM Extended Temperature T1/E1 Transport Extenders make it easy to terminate a T1/E1 in a remote, environmentally exposed location.

Overcome line of sight T1/E1 distance limitations and add flexibility to your wireless T1/E1 network topology with the EnviroNET T1/E1 Transport Extenders. Just co-locate an EnviroNET T1/E1 Transport Extender at the

Outdoor Cabinet (ODC) and a Patton Model 3088/K or T unit at the Customer Demarc to extend the reach of the T1/E1 wireless circuit at distances up to 5.3 miles (8.5 km).

ODC EnviroNET

2115/T/EUI Distances up to 5.2 miles (8.5 km)
2-wire twisted pair

EnviroNETTM VoIP gateways provide reliable, robust, and secure solutions for converting analog FXS/FXO or digital ISDN circuits to VoIP in harsh environments.

Extending Patton's EnviroNET Voice-over-IP Gateway routers into exposed environments for seamless access between remote packet-voice and local PSTN telephony. Using ToIP call switching, distinctive ring, and Caller-ID a single handset can now access the right service at any time. With Patton's ClearConnectTM fail-over protection, a phone call will be completed. Network health monitoring and ToIP switching ensures a clear call even if the IP network is down. Patton's EnviroNET protective enclosures give service providers unlimited installation locations.

4 x FXS
2x FXO 1 x 10/100

ET4526/4JS2JO/UI
PSTN Local Calling

Packet Voice

Internet Voice Service Provider

PC monitoring

GENERAL PRODUCT SPECIFICATIONS
ET Extended Temperature Product Operating Temperature: -40 to 85°C Dimensions: 8.0L x 4.5W x 11.5H in. (203L x 114W x 292H mm) Weight: 8.5 lbs (3.86 kg)

EC Environmentally Controlled Product Operating Temperature: 0 to 85°C Dimensions: 8.0L x 4.5W x 11.5H in. (203L x 114W x 292H mm) Weight: 8.5 lbs (3.86 kg)

EH & EHA Environmentally Enhanced Products Operating Temperature: 0 to 50°C Dimensions: 8.0L x 4.5W x 11.5H in. (203L x 114W x 292H mm) Weight: 8.5 lbs (3.86 kg)

ORDERING INFORMATION
Extended Temperature Ethernet Extender ET2172/EUI: Multi Rate 50 Mbps ET2168/EUI: Multi Rate 16 Mbps ET2157/EUI: Rate Adaptive 4.6 Mbps ET2156/EUI: Rate Adaptive 2.3 Mbps ET2155/EUI: Long Range 144 kbps
Extended Temperature Device Servers ET2232/EUI: RS-232 Device Server 10Base-T ET2211/EUI: RS-232 Device Server 802.11b ET2285/EUI: RS232/422/485 Device Server 10/100Base-TX

Extended Temperature T1/E1 Extenders & Converters ET2115/T/EUI: T1 Extender ET2113/K/EUI: E1 Extender ET2720/C/EUI: T1 to V.35 Converter/NTU ET2720/I/EUI: Ethernet Extender over T1 ET2701/C/EUI: E1 to V.35 Converter/NTU ET2701/D/EUI: E1 to X.21 Converter/NTU
Extended Temperature xDSL Routers ET3087/RIC/UI: 4.6 Mbps G.SHDSL V.35 Router ET3087/RID/UI: 4.6 Mbps G.SHDSL X.21 Router ET3087/RIK/UI: 4.6 Mbps G.SHDSL E1/T1 Router ET3201/R/UI: 2.3 Mbps G.SHDSL Router ET3241/R/UI: 4.6 Mbps G.SHDSL Router

Extended Temperature VoIP Gateways & Routers ET4524/JS/UI: 4 port FXS VoIP Router ET4524/JO/UI: 4 port FXO VoIP Router ET4528/4JS4JO/UI: 4 port FXS plus 4 port FXO VoIP Router ET4528/8JS/UI: 8 port FXS VoIP Router ET4552/2BIS/UI: 2 port BRI VoIP Router
Extended Temperature Serial Extenders ET1080A/UI: RS-232 Long Range Extender ET3088/D/UI: X.21 Serial Extender ET3088/C/UI : V.35 Serial Extender ET1052/UI: RS-232 High Speed Sync Extender ET1053/UI: RS-232 High Speed Async Extender

Environmentally Hardened Ethernet Extenders EHA2172/UI: 50 Mbps Multi-Rate Ethernet Extender; UI
EHA2172/48: 50Mbps Multi-Rate Ethernet Extender; 48 VDC
EHA2172/12: 50 Mbps Multi-Rate Ethernet Extender; 12 VDC EHA2168/R/UI: 16 Mbps Multi-Rate Ethernet Extender; UI EHA2168/R/48: 16 Mbps Multi-Rate Ethernet Extender; 48 VDC EHA2168/R/12: 16 Mbps Multi-Rate Ethernet Extender; 12 VD

CONNECTIVITY--INDUSTRIAL ETHERNET RUGGEDIZED ETHERNET EXTENDER

Industrial Solutions
PRODUCT GUIDE

Ruggedized 50-Mbps Ethernet Extender Model 2172R

Patton's 2172R extends Ethernet connections at distances up to 5,500 feet (1,676 meters) over already existing infrastructure cabling

The Patton Model 2172R utilizes pre-existing twisted pair infrastructure enabling twisted pair previously used for legacy systems such as DDS, RS232/422/485 to be used for extending or connect Ethernet devices together. With a pair of 2172Rs or combined with a 2172, twisted-pair can carry an extraordinary full-duplex 50 Mbps of bandwidth.

Reusing the already existing infrastructure for Ethernet networking eliminates the cost of purchasing expensive fiber and CAT5e or greater cabling. Most importantly, it completely eliminates the hassle and sometimes overwhelming expense and down time of the cable installations.
The 2172R operates in rugged environments where temperatures range from -10 to 70°C, and it offers optional conformal coating for protecting the device from condensing humidity. The 2172R's aluminum case design enables users to conveniently mount it on a wall or DIN rail.

FEATURES & BENEFITS Operates over twisted-pair--Reduces the cost and has-
sles of new installations.
Plug and Play--No configuration or cables hassles during installation with auto-sensing 10/100, full or half duplex, and auto MDI-X
Full duplex data-line rate of 100 Mbps--Provides near fiber performance for bandwidth intensive applications
Wall or DIN rail mountable
Operating temperature of -10 to 70°C

SPECIFICATIONS

Front Panel Indicators: Power, Link, Ethernet
Power Supply: External AC and DC options: 120VAC, and universal input (UI)--100240 VAC, or optional -48 VDC, -24 VDC, or -12 VDC
Compliance: FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, LowVoltage Directive 73/23/EEC
Environment: Temp: -10 to 70°C Humidity Standard: Up to 90% non-condensing
Conformal Coated: 85% condensing humidity from -10 to 35°C
Dimensions: 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm)
Weight: 0.4 lbs (0.18 kg) without power supply

ORDERING INFORMATION
2172/EUI: 50-Mbps Ethernet Extender; 0 to 50°C; UI
2172R/EUI: Ruggedized 50-Mbps Ethernet Extender; -10 to 70°C; UI
2172R/C/EUI: Ruggedized 50-Mbps Ethernet Extender; -10 to 70°C; conformal coated (humidity 85% condensing from -10 to +35°C); UI
2172R/EUI-2PK: Ruggedized 50-Mbps Ethernet Extender Kit; -10 to 70°C; UI
2172R/C/EUI-2PK: Ruggedized 50-Mbps Ethernet Extender Kit; -10 to 70°C , conformal coated (humidity 85% condensing from -10 to +35°C); UI

DS/US* Line Settings
50/50 Mbps 25/25 Mbps 10/10 Mbps 4/1 Mbps 16/2 Mbps 50/2 Mbps

Throughput
48 Mbps 24.5 Mbps 10 Mbps 3.75/1 Mbps 15/2 Mbps 48/2 Mbps

Model 2172R Extension Distances

26 AWG (0.4 mm)
600 feet (184 m) 1,500 feet (458 m) 3,000 feet (900 m) 4,500 feet (1,373 m) 3,000 feet (900 m) 1,500 feet (458 m)

24 AWG (0.5 mm)
800 (245 m) 2,000 (610 m) 4,000 (1,200 m) 6,000 (1,830 m) 4,000 (1,200 m) 2,000 (610 m)

22 AWG (0.6 mm)
1,000 (306 m) 2,500 (763 m) 5,000 (1,500 m) 7,500 (2,288 m) 5,000 (1,500 m) 2,500 (763 m)

19 AWG (0.9 mm)
1,500 (460 m) 2,750 (1,144 m) 7,500 (2,250 m) 11,250 (3,430 m) 7,500 (2,350 m) 3,750 (1,144 m)

Application diagram

The Patton EnviroNET Ethernet Extender offers a reliable and robust solutions for connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment

Extend 10/100Base-TX Ethernet to reach

Office

beyond its natural limitations

Model 2172R

Model 2172

Pick & place machine

Up to 800 feet (243 meters) at 50 Mbps over voice-grade twisted-pair

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--INDUSTRIAL ETHERNET RUGGEDIZED G.703/G.704 NTU

Ruggedized G.703/G.704 NTU Model 2701R
The Patton Model 2701R NTU terminates E1 and Fractional E1 services and provides conversion to V.35, X.21, EIA-530 and 10Base-T Ethernet

One of the smallest and most economical NTUs available, the Model 2701R is designed with features usually found in more expensive units: flexible clocking modes, AMI/HDB3 coding, V.52/V.54 diagnostics, and user-selectable nx64 kbps data rates.
The Model 2701R series terminates E1/FE1 services for all nx64 kbps to 2.048 Mbps rates and connects to a

router, FRAD, CODEC, or LAN with V.35, X.21, EIA-530, or 10Base-T interfaces. Front facing LEDs and easily accessible switches allow for instant diagnostics and service monitoring. Convenient DIP switches support quick and concise configuration of your E1 termination. AC or DC power options make installing the Model 2701R into your network infrastructure a snap.
The wide variety of features, compact size, and low price make Patton's Ruggedized E1 NTUs the right solution for your next network challenge.

FEATURES & BENEFITS
Wall or DIN rail mount--Easily installs into any environment
Connect to any terminal interface--Smooth clock V.35, X.21, EIA-530, and 10Base-T Ethernet interfaces
Connect at any speed--Select nx64 data channels, or 2-Mbps Clear Channel
Eliminate routers--Bridge Ethernet across the WAN using industry standard PPP/BCP
Standalone or rack solutions--Available in desktop and high density SNMP managed racks
Power it anywhere--Universal input AC (100240V) and -48 VDC power supply options

2172R/EUI-2PK: Ruggedized 50-Mbps Ethernet Extender Kit; -10 to 70°C; UI
2172R/C/EUI-2PK: Ruggedized 50-Mbps Ethernet Extender Kit; -10 to 70°C , conformal coated (humidity 85% condensing from -10 to +35°C); UI

2701 standalone and 2701R 2Uhigh rack card versions are available with the same features as
the ruggedized 2701R.

2701R/C 2701R/B 2701R/D 2701R/I

2701/C 2701/B 2701/D 2701/I 2701RC/A/I 2701RC/B/B 2701RC/D/V 2701RC/D/D

DCE Interface

V.35 EIA-530 X.21 10Base-T

V.35

EIA-530

X.21

Network Interface Power Supplies Dimensions

RJ-48C

RJ-48C & Dual BNC

UI (100240 VAC) or -48 VDC

1.50 H x 4.17 W x 5.84 D inch

(3.84 H x 10.6 W x 14.84 D cm)

RJ-48C

Dual BNC AC or DC rack power supplies 3.0 H x 0.83 W x 7.84 D inch (7.6 H x 2.1 W x 19.0 D cm)

Weight

1.0 lbs (0.45 kg)

0.31 lbs (0.14 kg)

Line Rate

2.048 Mbps (E1 and Fractional E1)

Line Coding

AMI or HDB3

Line Framing

G.703 (unframed) or G.704/G.732 (framed)

DTE Rates

nx64 kbps (V.35, EIA-530, X.21/V.11); nx64 kbps to 10Base-T (10 Mbps)

Clocking

Smooth clocking--Internal, External or Receive Recover

Diagnostics

Local/Remote Loop, 511 and 511E BERT

Range

1.6 km

Compliance

CE Mark, G.703, G.704, G.723, G.832, CTR-12 and CTR-13; 1500 VRMS transformer isolation

Temperature/Humidity 32 to 122°F (0 to 50°C)/5 to 90% relative humidity, non-condensing

2701RC/C/I 10Base-T RJ-48C

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--INDUSTRIAL ETHERNET DEVICE SERVERS

Industrial Solutions
PRODUCT GUIDE

Single Port RS-232 Device Server EtherBITSTM 2232

Low-cost single-port device server lets you monitor, control, and collect data from any async RS-232 device over any IP network.

The Patton EtherBITS Model 2232 lets you leverage the power and flexibility of Ethernet for low-cost, hasslefree device networking.
Ethernet has far outgrown the confines of the office network. From factories and farms to railways and retail shops, credit bureaus, banks--even medical and dental offices--anywhere serial devices are found--the EtherBITS Model 2232 offers network managers the lowest-cost solution for making the transition from legacy serial infrastructure to the age of IP.
The EtherBITS Model 2232 provides both a serial RS-232 port (male or female/DB-9 or DB25) and a 10Base-T Ethernet port to link any RS-232 serial device to the Ethernet LAN at user-selectable data rates from 1200 bps to 115.2 kbps.

The Model 2232 encapsulates asynchronous serial data into IP packets for transport through the network via TCP or TELNET. The Model 2232 delivers a transparent end-toend connection to your PC or network management host using any user-defined IP address and TCP port number. For greater flexibility, a built-in DHCP client can dynamically obtain an IP address from a master server anywhere on the network. With the included COM Port Redirector software you can use the existing COM/TTY on your PC, thus avoiding the hassle and expense obtaining an additional software license.
Connect serial devices and terminals to Ethernet quickly and easily with Patton's low-cost EtherBITS Model 2232 SinglePort Terminal Server. The Patton EtherBITS Model 2232 lets you leverage the power and flexibility of Ethernet for lowcost, hassle-free device networking.

FEATURES & BENEFITS Control and Monitor Serial Device--Link asynchronous
serial devices and terminals to your IP network
Supports a Wide Range of Data Rates--User-selectable async data rates up to 115.2 kbps
Connects Directly to the LAN--10Base-T LAN connection via shielded RJ-45 connector
Standard TCP/IP Protocols Supported--ARP, ICMP, TCP, DHCP client, Telnet
COM Port Redirector Software Included--WindowsTactical COM Port Redirector Linux-vtty drivers
ORDERING INFORMATION RS-232 to 10Base-T Device Server 2232-25F/E: 10Base-T; DB25F RS-232 2232-25M/E: 10Base-T; DB25M RS-232 2232-9F/E: 10Base-T; DB9F RS-232 2232-9M/E: 10Base-T; DB9M RS-232 Accessories 08057R5DC-700M-EU: EU Desktop Power Supply 08057R5DC-700M-NA: NA Desktop Power Supply INS/A-DIN-35: Set of DIN rail clips

SPECIFICATIONS
Physical Interface: Serial: Serial: DB-9M/F; DB-25M/F Ethernet: Shielded RJ-45
Serial Transmission: RS-232 rates from 1200 bps to 115.2 kbps
Ethernet Transmission: 10Base-T
Management: Monitoring, control, and diagnostics via serial port, TELNET session, or HTTP
LED Indicators: Power, Ethernet Link and Activity, Serial Receive and Transmit
Power: External AC: 9~30 VDC, 300 mA at 9 VDC
Compliance: EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC; CE Mark
Environment: Temperature: 40122°F (550°C) Humidity: Up to 90% non-condensing
Dimensions: 4.5L x 3.2W x 1.0H in. (9.0L x 5.3W x 1.9H cm)
Weight: Packaged: 0.66 lbs (300 g) Unit only: 0.55 lbs (250 g)

Application diagrams
The Model 2232 Single-Port Device Server is used to connect various RS-232 serial devices to the local area network through their serial control ports. The 2232 enables monitoring, control, and data collection from this equipment by remote computers located anywhere on the local or wide area network.
COM Port redirector is provided for users who choose to use their existing serial communication application programs. Using the Redirector software provided on the Patton Model 2232 allows existing COM/TTY-based software to be preserved, thus no additional investment is required on additional software.
The Patton Model 2232 can be used for serial data tunneling when used in pairs. When operating in pairs, the 2232s will simulate a direct serial link between two serial devices over an Ethernet connection. Using IP allows the user to extend serial connections from across the building to across the world using the World Wide Web.

Time clock/Data collection terminal

Cash register or Sales terminal

Price scanner

Card reader

PBX

Ethernet

Monitor and Control over the network

Remote control port operation

Data collection over the
network

Serial

Model 2232

Ethernet WWW Ethernet IP Network

Model 2232

Unix Server RS-232
Console port

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--INDUSTRIAL ETHERNET DEVICE SERVERS

Universal Device Server EtherBITSTM 2285 RS-485/422/232 Device Server

Control, monitor, and collect data from all your serial devices over the local network or Internet. Patton's Model 2285 universal single-port device server is cost-effective and feature-rich, linking virtually any serial RS-485/422/232 device to any IP network over a secure connection.

Use Patton's Model 2285 universal single-port device server to control, access, interconnect, and manage RS485/422/232 devices from any remote location as if you were there. Patton's device servers provide a new level of efficiency and affordability to a variety of application environments including industrial automation, health care, security, transportation, retail, and many others.
With built-in DHCP the Model 2285 automatically obtains an IP address and a subnet mask from the master server. With the IP address identified and the serial port attached, the Model 2285 can tranparently pass data end-to-end using Telnet over TCP. Users can access management features over

telnet, serial console, or the web. Security features include static key based RC4 data encryption, SSL to provide a secure connection between client and server, HTTPS for secure data transfer over the network, and IP filter, which limits and controls access to the serial device. COM Port Redirector is included with Patton's 2285 enabling users to use their existing COM/TTY-based software, preventing the hassle and expense of investing in additional software.
The Patton Model 2285 provides physical-layer connectivity by a user selectable RS-485/422/232 serial port and 10/100Base-TX Ethernet port. Configure the serial port's data rate, ranging from 75 bps to 230 kbps, and choose from a variety of connector types including DB9 or DB25 male or female.
Easily and cost effectively bring serial devices onto one global or local area network!

FEATURES & BENEFITS User Selectable RS-485/422/232--Control, access, and
monitor your asynchronous serial terminals and devices over the LAN
Secure Communication--Security features include static key based RC4 data encryption, SSL, HTTPS, and IP filtering
COM Port Redirector Software Included--Windows®-- Tactical COM Port Redirector Linux-vtty drivers
Standard TCP/IP Protocols Supported--ARP, ICMP, TCP, Raw TCP, UDP, DHCP, Telnet/SSH, HTTPS, DNS, Dynamic DNS, SNMP v1, & v2, SSL
Connects Directly to the LAN--10/100Base-TX LAN connection via RJ-45 connects to any hub/switch
ORDERING INFORMATION RS-232/422/485 to 10/100Base-T Device Server 2285-9F/E: 10/100; DB-9F RS-232/422/485 2285-9M/E: 10/100; DB-9M RS-232/422/485
Call for DB-25 versions
Accessories 08059DC-700M-EU: EU Desktop Power Supply 08059DC-700M-NA: NA Desktop Power Supply INS/A-DIN-35: Set of DIN rail clips

SPECIFICATIONS
Physical Interface: Serial: DB-9M/F; DB-25M/F Ethernet: Shielded RJ-45
Serial Transmission: RS-485, 422, and 232 rates from 75 bps to 230 kbps (user selectable)
Ethernet Transmission: 10/100Base-TX
Management: Monitoring, control, and diagnostics via serial port, TELNET session, or HTTP
LED Indicators: Power, Ethernet Status, and Activity
Power: External AC: 9~30 VDC, 300 mA at 9 VDC
Compliance: EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC; CE Mark
Environment: Temperature: 40122°F (550°C) Humidity: Up to 90% non-condensing
Dimensions: 4.5L x 3.2W x 1.0H in. (9.0L x 5.3W x 1.9H cm)
Weight: Packaged: 1.05 lbs (0.46 kg) Unit only: 0.15 lbs (0.06 kg)

Application diagram
The Patton Model 2285 connects various RS485/422/232 serial devices to a central location over an Ethernet Local Area Network. The device server enables monitoring, controlling, management, and data collection.
The Model 2285 enhances COM Port Redirection with the addition of encryption. Secure connections between the 2285 and the controller's COM port are implemented with the Serial/IP COM port Redirector or OpenSSL Toolkit with an SSL security option.
The Model 2285 performs Serial Data Tunneling when used in pairs. The 2285s will simulate a direct serial link between two serial devices over an Ethernet connection. Using IP allows the user to extend serial connections across the building or acros the world.

Time clock/Data collection terminal
PBX

Model

2285

Remote control Port Operation
Monitor and Control over the Network

Data collection over the Network
Ethernet

Model 2285
Model 2285

Card reader

Cash register or Sales terminal

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--INDUSTRIAL ETHERNET DEVICE SERVERS

Industrial Solutions
PRODUCT GUIDE

Wireless (802.11b) Single-Port Device Server EtherBITSTM 2211

Best, most cost-effective method to control, monitor, and collect data from your RS-232 serial devices over a wireless local area network.

Ethernet continues to be the predominant office networking infrastructure. Now, Ethernet has made its way from the office to the shop floor. Traditional serial environments require the use of multi-port serial cards, expensive cables, and the personnel to manage multiple systems. Patton's Model 2211 Single-Port Device Server provides a quick, inexpensive, and hassle-free solution for connecting legacy serial terminals and devices to a local area network (LAN).
The Model 2211 links legacy serial RS-232 devices to the network by encapsulating serial data into IP packets for transport over the wireless LAN. Using TCP or TELNET, the Model 2211 can connect to any user-defined IP address and port. Once connected to the remote host, data is passed transparently endto-end. The built-in DHCP Client allows the Model 2211 to dynamically obtain an IP address and a subnet mask from a

master server. COM Port Redirector is included with Patton's 2211 enabling companies to use their existing COM/TTYbased software, preventing the hassle and expense of investing in additional software.
Physical layer-connectivity is provided via an RS-232 serial port and a 10Base-T Ethernet port. Configure the serial port's data rate, ranging from 1200bps to 115.2 kbps, and choose from a variety of connector types including DB9 or DB25 male or female.
Patton's Model 2211 offers the lowest transition cost in turning your serial infrastructure to IP.

SPECIFICATIONS
Mechanical Interface: Serial: DB-9M/F; DB-25M/F; Ethernet: WiFi 802.11b
Serial Transmission: RS-232 Rates from 1200 bps to 115 kbps
Ethernet Transmission: 802.11b Wireless Ad Hoc/Infrastructure Modes; 10Base-T Ethernet
Management: Monitoring, control, and diagnostics via serial port or TELNET session
LED Indicators: Power, Ethernet Link and Activity
Power: External AC: 930 VDC, 300mA at 9 VDC
Compliance: EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC; CE Mark
Environment: Temperature: 40122°F (550°C) Humidity: Up to 90% non-condensing
Dimensions: 4.5L x 3.2W x 1.0H in. (9.0L x 5.3W x 1.9H cm)
Weight: Packaged: 0.66 lbs (300 g) Unit Only: 0.55 lbs (250 g)

Application diagram The Model 2211 Single-Port Device Server is used to connect various RS-232 serial devices to the Local Area Network through their serial control ports. The 2211 enables monitoring, control, and data collection from this equipment by remote computers located anywhere on the local or wide area network. Both Ad hoc and Infrastructure mode is supported on the 2211. COM Port Redirector is provided for users who choose to use their existing serial communication application programs. Utilizing the COM Port redirector software provided on the Patton Model 2211 allows existing COM/TTY-based software to be preserved, thus no additional investment is required on additional software.
Infrastructure Mode
Model 2211

FEATURES & BENEFITS Control and Monitor Serial Device--Control and monitor
your serial asynchronous terminals and devices over the local area network Connects Directly to the Wireless LAN--802.11b WiiFi 10Base-T LAN connection via built-in WiFi module; 64-bit WEP security Standard TCP/IP Protocols Supported--ARP, ICMP, TCP, DHCP client, Telnet COM Port Redirector Software Included--WindowsTactical COM Port Redirector Linux-vtty drivers
ORDERING INFORMATION RS-232 to Wireless 802.11b Device Server 2211-25F/E: 802.11b; DB25F RS-232 2211-25M/E: 802.11b; DB25M RS-232 2211-9F/E: 802.11b; DB9F RS-232 2211-9M/E: 802.11b; DB9M RS-232 Accessories 08059DC-700M-EU: EU Desktop Power Supply 08059DC-700M-NA: NA Desktop Power Supply INS/A-DIN-35: Set of DIN rail clips
Ad Hoc Mode
Model 2211
Model 2211
PBX console port
PC serial port

Model 2211
Price scanner
POS

Wireless access points

Host computer Router

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--INDUSTRIAL ETHERNET DEVICE SERVERS

Multi-Port Asynchronous RS-232 Device Server EtherBITSTM 2234 & 2238 (RS-232)

The 2230 series is a cost effective Mulit-Port Device Server enabling user to configure, control, and monitor up to eight RS-232 devices over a Local Area Network.

LAN connectivity of your serial devices gives you the ability to remotely manage serial devices from anywhere in the world.

The EtherBITS family of device servers provide easy, feature rich, secure and reliable serial to LAN, WAN or Internet connectivity. Placing serial devices on to the LAN eliminates the hassle of serial cables, dedicated PCs, and local management. Providing Ethernet connectivity to your serial devices not only protects your current hardware investments, but simplifies future expansions and the management of that hardware.

The EtherBITS 2230 series encapsulates the asynchronous serial data of up to 8+1 ports into IP packets for transport through the network via TCP or TELNET. Patton's COM port redirector software makes it possible to establish a connection between the host and a networked serial device by creating a local COM or TTY port on the host computer, allowing existing software applications to work without modification.
The EtherBITS 2230 support a host of applications including industrial automation, credit bureaus, banks, point-of-sale, utilities, and any other applications that require asynchronous RS-232 serial to IP connectivity.

Application diagram

FEATURES & BENEFITS
High-density desk top box allows up to 8+1 Async RS232 to connect to the LAN or WAN.
Individually configurable serial channel with speeds of 1200bps to 230 kbps
Hardware (RTS/CTS) and software flow control (XON/XOFF)
User configurable IP services ensure reliable connectivity to any LAN or WAN. NAT, DHCP and Firewall permits advanced networking and flexibility.
Ensure data is secure end to end using IPsec with DES/3DES.
Configure and control up to 8 serial devices with Webbased management, SNMP, or command line all with password protection.

SPECIFICATIONS

Terminal/Channel Ports: Serial Asynchronous start-stop · # of Ports: 8 ports (3038); 4 ports (3034) · Max Aggregate Speed: 2Mbps · Interface: CCITT V.24 (EIA-561) on 8-pin RJ-45F · Data Communication Speed: Selectable 50bps-115.2kbps; auto-speed detection up to 115.2kbps · Data Format: Selectable 5,6,7, or 8 bits; 1, 1.5 or 2 stop bits, odd, even, or no parity · Flow Control: Software selectable (XON/XOFF) or hardware (RTS/CTS) in both directions · Break Propagation: Transparent · EIA signal propagation: Status of local DTR signal can be propagated to the remote end · Echo: Character echo can be selectively enabled for each terminal port
Ethernet Port(s): Auto-sensing 10/100BaseTX MDI-X Ethernet · Clock: Receive clock: external; Transmit clock: selectable as internal or external
Supervisory Port(s): Interface Auto-sensing 10/100BaseTX MDI-X on RJ-45 or Serial RS-232 (EIA-561) on RJ-45 · Serial Communication protocol: Asynchronous start-stop · Serial Speed: 300,1200,4800, or 9600 bps · Serial Data format: 7/8 bits, 2 stop bits, odd/even/no parity · Echo: Optional
Commands: Set/modify/view parameters · View status · Store

parameters in non-volatile memory · Copy parameters between ports · Provide local/remote loop backs on port · Establish connection between supervisory and terminal ports · Obtain statistic reports · Unit reset; individual port reset · Remote supervisory access · Enable/Disable remote access
IP Services Supported: IPv4 · RIPv1 and v2 (RFC 1058 and 2453) · ICMP redirect (RFC 792); packet fragmentation · DiffServ/ToS set or queue per header bits · Packet policing discards excess traffic · 802.1p/Q VLAN support with 4096 IDs · IPSEC AH & ESP Modes · Manual/IKE keying · AES/DES/3DES Encryption
IP Connectivity Supported: TCPRAW · UDP · Telnet · DHCP · NAT
Operating Environment: Temp.: 040°C · Humidity: 580% (non condensing)
System: CPU Motorola MPC859 @ 50 MHz · Memory 16MB SDRAM/4MB Flash · Power: 100240 VAC (50/60 Hz) · Power dissipation: 4W
Compliance: EMC compliance: EN55022 and EN55024 · Safety compliance: EN 50950 · CE compliance FCC Part 15 Class A

I'm John, one of Patton's Product Group Managers. If you do not find what you need at www.patton.com or in this catalog, or if you have technical questions or comments concerning Device Servers, please call me at +1 301.975.1000, x160. You can also send e-mail to jgrant@patton.com.

ORDERING INFORMATION 2234/EUI: 4 port RS-232 2234/E48: 4 port RS-232 2238/EUI: 8 port RS-232 2238/E48: 8 port RS-232

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--INDUSTRIAL ETHERNET DEVICE SERVERS

Industrial Solutions
PRODUCT GUIDE

Multi-Port Async. RS-232/422/485 Device Server Models 2284 & 2288 (MEI)

The 2280 series is a versatile Mulit-Port Device Server enabling users to configure, control, and monitor up to eight RS-232/422/485 DCE or DTE devices over a Local Area Network.

hardware. LAN connectivity of your serial devices gives you the ability to remotely manage serial devices from anywhere in the world.

The EtherBITS 2280 series encapsulates the asynchronous serial data of up to 8+1 ports into IP packets for transport through the network via TCP or TELNET. Patton's COM port redirector software makes it possible to establish a connection between the host and a networked serial device by creating a local COM or TTY port on the host computer, allowing existing software applications to work without modification.
The EtherBITS 2280 support a host of applications including industrial automation, credit bureaus, banks, point-of-sale, utilities, and any other applications that require asynchronous RS-232/422/485 serial to IP connectivity.

FEATURES & BENEFITS
High-density desk top box allows up to 8+1 Async DCE or DTE RS232/422/485 to connect to the LAN or WAN.
Individually configurable serial channel with speeds of 1200 bps to 230 kbps
Per port DCE or DTE configurable
Hardware (RTS/CTS) and software flow control (XON/XOFF)
User configurable IP services ensure reliable connectivity to any LAN or WAN. NAT, DHCP and Firewall permits advanced networking and flexibility.
IPsec with DES/3DES ensures data is secure end-to-end.
Configure and control up to 8 serial devices with Webbased management, SNMP, or command line all with password protection.

Application diagram

SPECIFICATIONS

visit us online
www.patton.com

I'm Emily, one of Patton's Electrical Engineers designing serial device servers. To buy one of these state-ofthe-art devices, call +1 301.975.1000 or send email to sales@patton.com.

ORDERING INFORMATION 2284/EUI: 4 port 232/422/485 2284/E48: 4 port 232/422/485 2288/EUI: 8 port 232/422/485 2288/E48: 8 port 232/422/485

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

LOW SPEED TDM
Full Duplex, 2-Channel

MINI STAT MUX
Full Duplex, Async

Connect two sync terminals, or one async and one sync terminal, to a sync modem
Data rates up to 19.2 kbps at the sub-channels and 38.4 kbps at the composite channel
RS-232 composite port interface and subchannel interface
Model 3042 Page 27

Our MicroStatsTM statistical multiplexers double the usefulness of your existing modems!
Data rates up to 115.2 kbps and sub-channel data rates to 57.6 kbps
Power drawn from main and sub-channel devicesno AC power or batteries required
Model 3032 Page 27

MULTIPORT ASYNC MUX
Up to 8 Ports on a Single Link

Multiplexers

8-Port Managed High-Speed RS-232 Asynchronous Multiplexer . . . . . . . . . . . . . . . . . . .26 Low-Speed Time Division Multiplexer . . . . . . . . . . .27 Miniature 2-Port Statistical Multiplexers . . . . . . . . . .27

Modem/Port Sharing Devices

Digital Sharing Device . . . . . . . . . . . . . . . . . . . . . .28 Modem Sharing Device . . . . . . . . . . . . . . . . . . . . . .29 Micro Modem Splitter . . . . . . . . . . . . . . . . . . . . . . .29

Mini-Rack & Cluster Boxes

Mini-Rack System and ClusterBoxes . . . . . . . . . . . . .30

Universal Mounting Panels

10 and 2-Slot Universal Mounting Panels . . . . . . . . .32 16-Slot Universal Mounting Panel . . . . . . . . . . . . . .33

Consolidate up to 8 async. data sources onto a single sync. WAN link or IP/Ethernet LAN connection
V.35/X.21/T1/E1 Ethernet Composite--Connect to any sync dedicated WAN or use standard PPP or Frame Relay networks
Up to 8 Ports on a Single Link--Multiplex up to 8 EIA-232/V.24 ports at 115.2kbps
Models 3034, 3038 Page 26

DIGITAL SHARING DEVICE
V.24, X.21, or RS-232/423

MODEM SHARING DEVICE
RS-232

DB-25 MODEM SPLITTER
Sync or Async

Share up to 8 ports (DCE or DTE) to 1 master DTE or DCE
Models 3060 Page 28

Three RS-232 DTEs can contend for access to one RS-232 modem
Model 3010 Page 29

Lets three devices share a single modem
Models 305 Page 29

CONNECTIVITY--MULTIPLEXERS & SHARING DEVICES MULTIPLEXERS

Industrial Solutions
PRODUCT GUIDE

Multiport Asynchronous Multiplexers Models 3034 & 3038

The Model 3038 IpStatmux Managed Multiport Asynchronous Multiplexer combines up to eight EIA-232/V.24 interfaces over any composite V.35, X.21, T1/E1, or Ethernet/IP port and offers the lowest-cost, most flexible solution for multiport asynchronous terminal connectivity.

uplink, the Model 3038 also "future proofs" your legacy equipment. Now multiplexed data can use existing LAN, WAN and Internet connections...simultaneously. Data security and service quality is ensured with IPSec encryption as well as packet labeling and integrated data QoS with flow-control.

Now it is easier than ever to link up multiple asynchronous terminals, hosts, and devices. Patton's Model 3038 IpStatmux Managed Multiport Asynchronous Multiplexer consolidates up to eight asynchronous data sources onto a single synchronous WAN link or IP/Ethernet LAN connection for secure, reliable, and transparent multiplexing.
The Model 3038 offers advanced network and transmission options. The integrated composite port provides a standard synchronous link connection to NTUs, DSUs or traditional WAN services. By including an Ethernet port as a composite

Reliable data is ensured via multiple CRC-16 checks, transparent data checksums and in-order data delivery. In the event of an error, the Model 3038 automatically retransmits the data to ensure transparent and error free delivery. With user configurable flow control including software XON/XOFF, hardware RTS/CTS and combination provides optimal data transfer.
Integrated management offers both local and remote configuration, control and troubleshooting. Use the supervisory port for out-of-band access or use LAN based services such as Telnet, WEB/HTTP and SNMP. Per-port options allow for diagnostics loops, traffic statistics, review channel status and monitor ports and events. Link down, data loss and errors can be signal.

ORDERING INFORMATION

Managed High-Speed RS-232 Async. 8-port Stat Mux 3038/C/EUI: Composite V.35 Sync
3038/D/EUI: Composite X.21 Sync
3038/K/EUI: Composite E1 Sync

Managed High-Speed RS-232 Async. 8-port Stat Mux, 2-Pack 3038/C/EUI-2PK: Composite V.35 Sync
3038/D/EUI-2PK: Composite X.21 Sync
3038/K/EUI-2PK: Composite E1 Sync

Managed High-Speed RS-232 Async. 4-port Stat Mux 3034/C/EUI: Composite V.35 Sync
3034/D/EUI: Composite X.21 Sync
3034/K/EUI: Composite E1 Sync

Managed High-Speed RS-232 Async. 4-port Stat Mux, 2-Pack 3034/C/EUI-2PK: Composite V.35 Sync
3034/D/EUI-2PK: Composite X.21 Sync
3034/K/EUI-2PK: Composite E1 Sync

FEATURES & BENEFITS
Up to 8 Ports on a Single Link--Multiplex up to 8 EIA232/V.24 ports at 115.2kbps with individually configurable speed, flow control, echo and testing.
V.35/X.21/T1/E1 Ethernet Composite--Connect to any synchronous dedicated WAN or lower costs using standard PPP or Frame Relay networks. Ethernet/IP can be used over any network or Internet without the expense of dedicated lines.
Local & Remote Management--Configure and control with Web-based management, SNMP or command line supervisory port all with password protection.

SPECIFICATIONS

Terminal/Channel Ports: Serial Asynchronous start-stop · # of Ports: 8 ports (3038); 4 ports (3034) · Max Aggregate Speed: 2Mbps · Interface: CCITT V.24 (EIA-561) on 8-pin RJ-45F · Data Communication Speed: Selectable 50bps-115.2kbps; auto-speed detection up to 115.2kbps · Data Format: selectable 5,6,7, or 8 bits; 1, 1.5 or 2 stop bits, odd, even, or no parity · Flow Control: Software selectable (XON/XOFF) or hardware (RTS/CTS) in both directions · Break propagation:Transparent · EIA signal propagation: Status of local DTR signal can be propagated to the remote end · Echo: Character echo can be selectively enabled for each terminal port
Composite Port(s):Auto-sensing 10/100BaseTX MDI-X Ethernet & V.35 or X.21 · Error detection & correction: 16-bit CRC-CCITT with ARQ (automatic re-transmission on error) · Speed: selectable, serial up to 1.2bps2Mbps, Ethernet auto detect-10/100 · Interface: DB25,V.35; DB15, X.21 · Data Encoding: NRZ or NRZI · Clock: receive clock: external; transmit clock: selectable as internal or external
Supervisory Port(s): Interface auto-sensing 10/100BaseTX MDI-X on RJ-45 or Serial RS-232 (EIA-561) on RJ-45 · Serial Comm. protocol: asynchronous start-stop · Serial Speed: 300, 1200, 4800, or 9600 bps · Serial Data format: 7/8 bits, 2 stop bits, odd/even/no parity · Echo: Optional

Commands: Set/modify/view parameters · View status · Store parameters in non-volatile memory · Copy parameters between ports · Provide local/remote loop backs on port · Establish connection between supervisory and terminal ports · Obtain statistic reports · Unit reset; individual port reset · Remote supervisory access · Enable/Disable remote access
IP Services Supported: IPv4 · RIPv1 and v2 (RFC 1058 and 2453) · ICMP redirect (RFC 792); packet fragmentation · DiffServ/ToS set or queue per header bits · Packet policing discards excess traffic · 802.1p/Q VLAN support with 4096 IDs · IPSEC AH & ESP Modes · Manual/IKE keying · AES/DES/3DES Encryption
IP Connectivity Supported: X.21/V.35 (Frame Relay (8PVCs); RFC1490,FRF.12 fragmentation; LMI, Q993D,ANSI 617D, Gang of Four; PPP,PAP,CHAP,LCP,IPCP; T1/E1 (ITU-T G.703,ANSI T1.403; AMI, B8ZS, HDB3) · TCPRAW · UDP · Telnet · DHCP · NAT
Operating Environment: Temp.: 040°C · Humidity: 580% (non condensing)
System: CPU Motorola MPC859 @ 50 MHz · Memory 16MB SDRAM/4MB Flash · Power: 100240 VAC (50/60 Hz) · Power dissipation: 4W
Compliance: EMC compliance: EN55022 and EN55024 · Safety compliance: EN 50950 · CE compliance FCC Part 15 Class A

Application--Remote Office/Branch Office Voice Extension and Access

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--MULTIPLEXERS & SHARING DEVICES MULTIPLEXERS

Low-Speed Time-Division Multiplexer Model 3042

Connect two sync terminals, or one async and one sync terminal, to a high speed sync modem

The Model 3042 is a full-duplex, RS232, two-channel, time-division multiplexer (TDM) with an independent switch-selectable V.14/V.22-compliant async-to-sync interface adapter on sub-channel 1. It provides two channels that can operate as two sync channels or as one sync and one async channel. TDM techniques are used to interleave data from the two channels into a composite channel that operates at twice the rate of the sub-

channels. The composite channel is interfaced with a high speed synchronous modem via a straight-through cable.

RS-232 Two-Channel Multiplexer Application

Model 3042

High Speed Sync Modem

Model 3042

FEATURES & BENEFITS RS-232 composite port interface and sub-channel interface Provides data rates up to 19.2 kbps at the sub-channels
and 38.4 kbps at the composite channel Sturdy aluminum enclosure External wall-mounted power supply UL, CSA, and FCC Class A approvals

SPECIFICATIONS
Capacity: Two sync RS-232 terminals or one sync and one async RS-232 terminal multiplexed on one sync RS-232 modem Data coding: Sync or async Data interface: EIA RS-232-C Data rates: Async600 to 19,200 bps; Syncup to 19,200 bps; Composite38,400 bps

Power source: 110 or 220 VAC, 47 to 63Hz, 5 Watts, external wallmounted transformer
Op. temp.: 32 to 122°F (0 to 50°C) Rel. humidity: 5 to 90% non-condensing
Dimensions: 2.0H x 8.30W x 6.10D in. (5.08H x 21.08W x 15.49D cm)
Weight: 2.25 lbs (1.02 kg)

PSTN Mixed Sync and Async Terminals

Host Processor

ORDERING INFORMATION 3042: Powered V.24 Micro TDM (TDM-V24) 3042-220 Same as 3042 except pre-configured for 220VAC

Miniature 2-Port Statistical Multiplexers Models 3022 & 3032

Our MicroStatsTM double the usefulness of your existing modems!

These devices enable two asynchronous RS-232 devices to communicate over a single modem link, effectively doubling the capacity of two analog (V.32, V.34, etc.) modems or two shortrange modems. They also allow four async RS-232 devices to be connected together over short distances (100 ft/30 m) using just a crossover cable. The devices are configured using

extended AT commands (the local and remote mux can be configured from local port 1 or 2) and can perform auto-baud sensing. Hardware (RTS/CTS) and software (X-ON/X-OFF) flow control are supported.

FEATURES & BENEFITS Power drawn from main and sub-channel devicesno AC
power or batteries required
Model 3022 main and sub-channel data rates to 38.4 kbps
Model 3032 main channel data rates to 115.2 kbps and sub-channel data rates to 57.6 kbps

SPECIFICATIONS
Sub-Channels Interface: RJ45, V.24/RS-232C Configuration: DCE Transmission: Async, full duplex Parity: Odd, even, mark, space, or none Flow Control: Hardware (RTS/CTS), software (XON/XOFF)

Stop Bits: 1 or 2
Baud Rate: Model 3022--110, 300, 1200, 2400, 4800, 9600, 19200, 38400 bps, selectable or auto detected; Model 3032--110, 300, 1200, 2400, 4800, 9600, 19200, 38400 and 57600 bps selectable (auto detected up to 38.4 kbps)

Main Channel Interface: DB-25 male, DTE, V.24/RS-232-C
Transmission: Async, full duplex Baud Rate: Model 3022--1.2, 2.4, 4.8, 9.6, 19.2, 38.4 kbps, selectable; Model 3032--2.4, 4.8, 9.6, 19.2, 38.4, 57.6 and 115.2 kbps, selectable

Word Size: 7 or 8 data bits Flow Control: RTS/CTS or no flow control
Temp Range: 32158°F (070°C) Humidity: up to 95%, non-condensing Dimensions: 2.7 x 2.1 x 7.4 in. (6.9 x 5.3 x 1.9 cm)

ORDERING INFORMATION 3022: 2-Channel Statistical Mux 3032: MicroStat 2-Channel Statistical Mux

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--MULTIPLEXERS & SHARING DEVICES MODEM/PORT SHARING DEVICES

Industrial Solutions
PRODUCT GUIDE

Digital Sharing Device Model 3060
Expand your systems without acquiring additional data lines or modems.

Model 3060/V24 Digital Sharing Device (DSD) act as combined modem and port sharing device. With this high-speed bi-directional unit, up to eight DCE or DTE devices can share one DCE or DTE device in a polled or contention environment. Sub-channels contend for the main channel by activating RTS, DCD, or by detecting data transitions.
Clock signals are provided either by an external modem connected on the master port, or by the internal baud rate generator (which provides rates up to 2,048 kbps). In addition, any sub-channel port can be configured to provide clocking

so that if the clock signal provided by the master source fails--or if DCD on sub-channel 1 becomes inactive--the DSD will use the internal clock or a sub-channel clock.
To prevent network lockups, DSDs have anti-streaming features that automatically remove a defective sub-channel from service. Each DSD sub-channel can be configured for DTE or DCE operation. Each channel can be set for Data or Interface Lead contention.
Each DSD comes with an internal power supply that can be set by a switch for 110- or 220-VAC operation.

FEATURES & BENEFITS Contention via RTS, DCD or data transitions,
individually selectable in each sub-channel 64-bit tail circuit buffer (TCBs) included Internal or external clock Dial-up modem support Operation is transparent to data Sturdy rack-mountable enclosure (rack mount
kit included) Individual sub-channel enable/disable switches Internal power supply; switch selectable for 110 or 220-VAC UL, CSA, TÜV, and FCC Class A
I'm Glen, one of Patton's Product Marketing Managers. If you do not find what you need at www.patton.com or in this catalog, please call me at +1 301.975.1000, x356. You can also send e-mail to gflowers@patton.com.

SPECIFICATIONS
Capacity: 6 sync/async DTE or DCE devices Tail circuit buffering: Uni-directional 8-bit ring buffer Anti-streaming: Automaticselectable time-out intervals or disable Sub-channel and modem interface: RS-232 using DB-25s

Data rates: Up to 76.8 kbps
Weight: 4.5 lbs (2.1 kg)
Timing: InternalDIP switch selectable; Normal from modem; Externalclock provided on any sub-channel, with fallback to internal clock or sub-channel

Power source: 100120/200240 VAC, 50/60 Hz, 0.16/0.08A, switch selectable
Humidity: 590% non-condensing
Terminal service modes: Scanning channels are continuously scanned for RTS/DCD or DATA on a sequential basis; Priority channels are

continuously scanned for RTS/DCD or DATA, channel 1 has highest access priority
Op. temp.: 32 to 122 °F (0 to 50 °C) Dimensions: 1.75H x 17.00W x 11.0D in. (4.44H x 43.18W x 18.93D cm)

ORDERING INFORMATION
3060/V24: RS-232/423 DSD, 8 ports DTE or DCE to 1 master DTE or DCE; 120 VAC version
3060/V24-220: RS-232/423 DSD, 8 ports DTE or DCE to 1 master DTE or DCE; 220 VAC version

Typical application Leased or dial-up line

Modem

Terminals

Modem Leased or dial-up line Terminals

visit us online
www.patton.com

Model 3060/V24

Modem

Leased or dial-up line

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--MULTIPLEXERS & SHARING DEVICES MODEM/PORT SHARING DEVICES

Modem Sharing Device Model 3010
Lets three RS-232 DTEs contend for access to one RS-232 modem
The Model 3010 modem sharing device lets three RS-232 DTEs contend to transmit data to one DCE such as a modem or mux. Supporting asynchronous or synchronous data rates to 38.4 kbps, the Model 3010 passes data and control signals in parallel from the modem to all three DTEs. Each DTE may also raise RTS to contend for the right to transmit exclusively to the modem. If two DTEs raise RTS simultaneously, the Model 3010 prioritizes access by port (1-2-3). The Model 3010 requires no AC power or batteries, no configuration, and plugs directly into the modem or multiplexer's DB-25 port.
Typical application

FEATURES & BENEFITS Async or sync operation (transparent to protocol) No AC power or batteries required Prioritized monitoring scheme uses RTS contention Modem transmits in parallel to each connected DTE device Miniature size plugs into modem port

DTE Port #2

DTE Port #3

DTE Port #1

Modem Port

Modem

Leased or dial-up line

SPECIFICATIONS
Data Rates: 300 bps to 38.4 kbps Transmission Format: Async or Sync (transparent to protocol) Transmission Mode: Full or half duplex

Model 3010

Contention Method: Controlled by RTS
Interface: EIA RS-232/CCITT V.24 Dimensions: 3.13 x 2.11 x 1.20 in. (8 x 5.4 x 3 cm)

Connectors: DB-25 male on modem (DCE) interface, DB-25 female on DTE interfaces
Op. Temp.: 32122°F (050°)

Power: Derived from RS-232 data and control signals, no AC power or batteries required
Humidity: Up to 95% non-condensing

ORDERING INFORMATION 3010: Modem Sharing Device

Micro Modem Splitter Model 305
Lets three devices share a single modem The Model 305 Micro Modem Splitter is a passive device that connects up to three computers to a single modem. The splitter is transparent to data format. The DTE pins 2, 4, and 20 are isolated to the modem port; all other pins are passed straight through. The Model 305 supports sync or async operation.
FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

FEATURES & BENEFITS Completely passive device DTE pins 2, 4, and 20 are isolated to the modem port; all
other pins are passed straight through Transparent to data format Sync or async operation
ORDERING INFORMATION 305: Modem Splitter
visit us online
www.patton.com

CONNECTIVITY--MINI-RACK PRODUCTS MINI-RACK & CLUSTER-BOXES

Industrial Solutions
PRODUCT GUIDE

Mini-Rack System and ClusterBoxesTM Models 1000R16, 1000CU2, 1000CU4, & 1000CU8
Multiple datacom devices fit side-by-side in our mini-rack and ultra-compact ClusterBoxes!

Our miniature rack cards have a unique design: front function cards and rear interface cards that connect together on a midplane power bus. This configuration allows interface cables to remain connected while function cards are hotswapped (and vice versa). Each mini-rack and ClusterBox has a power supply that services all cards in the chassis. You can configure the mini-rack and ClusterBoxes

with a variety of function cards (shortrange modems or SRMs, fiber modems, converters, etc.) and you can mix-and-match function cards with different interface cards.

16 ports fit a wide variety of Patton products--from CSU/DSUs to short-range modems to converters.

Choose from a variety of rear interfaces: DB-25, RJ-11, RJ-45, UD-26, etc.

FEATURES & BENEFITS
Multi-function--Supports interface converters, CSUs, fiber modems and virtually all Patton mini-modems.
Hot-swappable--Replace function cards without turning off the power.
Reliable--Our distributed power system gives each rack card its own power supply circuit
Flexible--Convenient rack mount and ClusterBox versions are available to meet your needs

SPECIFICATIONS
Environmental Op. Temp.: 32122°F (050°C) Humidity: 590%, non-condensing
24 VDC Power Input Voltage: 1836 VDC Input Current: 2A Max at 18 VDC Surge Protection: Triggered at 39 VDC Output Voltage: 12 VAC at 2A Output Power: 24 W LED indicators: Power, DC Input
48 VDC Power Input Voltage: 4060 VDC Input Current: 1A Max at 40 VDC Surge Protection: Triggered at 75 VDC Output Voltage: 12 VAC at 2A Output Power: 24 W

LED indicators: Power, DC Input
120 VAC Power Input Voltage: 100230 VAC Input Current: 400 mA Output Voltage: 10 VAC at 2.4 A Output Power: 24 W LED indicator: Power
220 VAC Power Input Voltage: 200240 VAC Input Current: 200 mA Output Voltage: 10 VAC at 2.4 A Output Power: 24 W LED indicator: Power

Device type
Plug-in Short-Range Modems (SRM)

Standalone Compatible Model Rack Card
1000 Series 1000RC 1004A Series 1004ARC 1005 Series 1000RC 1008 Series 1004ARC 1009 Series 1000RC 1010B Series 1010RC 1010R Series 1010RC 1012A Series 1012ARC 1015 Series 1000RC 1016 Series 1010RC 1017 Series 1010RC 1019 Series 1010RC 1020 Series 1080ARC 1025 Series 1080ARC 1030 Series 1080ARC 1040 Series 1080ARC

Rack Card (RC) Description (Configuration)
Async SRM dual RC High speed multipoint dual RC Async SRM dual RC High speed multipoint dual RC Async SRM dual RC Trans Isolated SRM dual RC Trans Isolated SRM dual RC Async., multipoint SRM dual RC Async SRM dual RC Trans Isolated SRM dual RC Trans Isolated SRM dual RC Trans Isolated SRM dual RC 57.6 Async./Sync. SRM RC 57.6 Async./Sync. SRM RC 57.6 Async./Sync. SRM RC 57.6 Async./Sync. SRM RC

Device Standalone Compatible

Rack Card (RC) Description

Page

type

Model Rack Card

(Configuration)

Page

36 Powered 1050 Series 1060RC 115.2 Async. SRM RC

Short-Range Modems

1060 Series

1060RC 115.2 Async. SRM RC

36 (SRM)

1080A Series 1080ARC 57.6 Async./Sync. SRM RC

37 Fiber

1110A Series 1110ARC Fiber SRM RC

Modems 1140A Series 1140ARC Fiber Optic Modem w/V.54 Diagnostics 43

2085 Series 2085RC RS-232 to RS-485 Converter dual RC 48

Converters & Modem

2089 Series 2085RC RS-232 to RS-485 Converter dual RC

38 Eliminators 222N Series 222NRC RS-232 to RS-422 Converter dual RC 47

222N9 Series 222NRC RS-232 to RS-422 Converter dual RC 47

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--MINI-RACK PRODUCTS MINI-RACK & CLUSTER-BOXES

1000CU2--Our 2-Slot ClusterBoxTM has about the same footprint as a standalone box, but gives you the flexibility of a rack.

1000CU4--Our 4-slot ClusterBoxTM is perfect for an office or workgroup connection. It services four to eight devices

1000CU8--When you don't need a full rack, our 8-slot ClusterBoxTM gives you the power of up to 16 short hauls or converters in a single enclosure.

ORDERING INFORMATION
Factory part number encoding
1000XXX Z/ XXX X Power Cord Code (see power cord description, AZ at right) Factory Power Configuration (120 = 120 VAC, 230 = 230 VAC 48V = 48 VDC) Approvals Designation (P = Standard, E = European CE Marked Configuration) Chassis Type (R16 = 16-Slot 19-in. Rack, CU2 = 2-Slot Cluster, CU4 = 4-Slot Cluster, CU8 = 8-Slot Cluster)
Pre-Configured Rack Assemblies
Example 19-in. 2U rack chassis 1000R16P/120K: 120 VAC power module (includes power cord for U.S.A.)
1000R16E/230D: CE compliant, 230 VAC power module (includes power cord for U.K.)
1000R16P/230G: 230 VAC power module (includes power cord for India)
1000R16P/48V: 48 VDC Power Supply
1000R16P/24V: 24 VDC Power Supply
Example Desktop ClusterBoxesTM 1000CU2P/120K: 2-Slot Cluster Unit with 120 VAC power module (includes power cord for U.S.A.)
1000CU2E/230D: 2-Slot Cluster Unit with CE compliant, 230 VAC power module (includes power cord for U.K.)
1000CU2P/48V: 2-Slot Cluster Unit with 48 VDC Power Supply

Rack System Parts
Empty Rack 1000R16P: 19-in. 16-Slot Rack Chassis Sub-Assembly
Empty Cluster Chassis 1000CU2: ClusterBox-II 2-Slot Desktop Cluster Sub-Assembly 1000CU4: ClusterBox-IV 4-Slot Desktop Cluster Sub-Assembly 1000CU8: ClusterBox-VIII 8-Slot Desktop Cluster Sub-Assembly
Rear Power Entry Modules 1000RPEM-DC: DC Rear Power Entry Module 1000RPEM-RDC: DC Redundant Rear Power Entry Module 1000RPEM: Standard 120/230 VAC Rear Power Entry Module
1000RPEM-V: CE Compliant 120/240 VAC Rear Power
Entry Module
Front Power Supply Modules 1000RPSM-2: 120/230 VAC Front Power Supply Module 1000RPSM-V: CE Compliant Front Power Supply Module 1000RPSM-48A: 48 VDC Front Power Supply Module 1000RPSM-R48A: 48 VDC Redundant Front Power Supply Module (2 Required) 1000RPSM-24A: 24 VDC Front Power Supply Module 1000RPSM-12A: 12 VDC Front Power Supply Module
Power cord sets 0805US: "K" American Power Cord 0805EUR: "A" European Power Cord CEE 7 0805UK: "D" United Kingdom Power Cord 0805AUS: "C" Australia Power Cord

0805DEN: "E" Denmark Power Cord 0805FR: "F" France/Belgium Power Cord 0805IN: "G" India Power Cord 0805IS: "H" Israel Power Cord 0805JAP: "J" Japan Power Cord 0805SW: "L" Switzerland Power Cord
Spare parts, hardware, fuses, panels 05R16FPB1: Single-width Blank Front Panel 05R16FPB4: 4-Slot-Wide Blank Front Panel 05R16RPB1: Single-Width Blank Rear Panel 05R16RPB4: 4-Slot-Wide Blank Rear Panel 0821R4: Fuse, 0.4A (5x20mm) 0821R2: Fuse, 0.2A (5x20mm) 056S1: 16 #4 pan head screws & washers
I'm Brian, one of Patton's Product Validation Engineers who makes sure your mini-rack product works reliably. To buy one of these state-of-the-art devices, call +1 301.975.1000 or send email to sales@patton.com.

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--MINI-RACK PRODUCTS UNIVERSAL MOUNTING PANELS

Industrial Solutions
PRODUCT GUIDE

10 and 2-Slot Universal Mounting Panels Models 1001MP10 & 1001MP2
Rack, stack, and organize up to 10 Patton devices with these multi-functional mounting panels.
The Model 1001MP10's sturdy 4U design easily installs into any standard 19-inch rack. A combination of a unique groove system and an easily installed back panel enables the 1001MP10 to securely lock the individual Patton modems and their power supplies. For lower density applications, the Model 1001MP2 offers a 1.5U-high, 2-slot panel.
Model 1001MP10

FEATURES & BENEFITS
Multi-Functionality--Supports NTUs, xDSL Modems, Short Range Modems, and Ethernet Extenders.
Independent Slots--Up to 10 independently operating slots to completely do away with any single point of failures.
Rackmount--Both Universal Mounting Panels fit into any 19-in. rack. The 10-slot panel is only 4U (7 in./17.78 cm) high. The 2-slot is 1.5U (2.63 in./6.68 cm) high.
Cost-Effective--Rack-mount products you have already purchased.

The Model 1001MP10 Universal Mounting Panel offers the ability to rack up to 10 Patton products side by side. Products that are compatible with the 1001MP10 and 1001MP2 include Ethernet Extenders, xDSL modems, short range modems, NTUs, and much more!

1001MP10 rear view

10 rear slots for device power supplies

Model 1001MP2

The Model 1001MP series offers a convenient method for converting your favorite Patton standalone product into a rack-mounted solution.

I'm John, one of Patton's Product Group Managers. If you do not find what you need at www.patton.com or in this catalog please call me at +1 301.975.1000, x160. You can also send e-mail to jgrant@patton.com.

Patton Product Compatibility Table

xDSL Modems

E1/T1 Network Extenders

E1/T1 NTU

Ethernet Extenders

Serial Short-Range Modems

1082: iDSL Modem

2113: T-Link E1 Extender 2701 Series: G.703/G.704 FE1/E1 NTU

2155: 144 kbps CopperLink Extender 1060: RS-232 115.2 kbps Asynchronous SRM

3088: G.SHDSL Modem

2115: T-Link T1 Extender

3201: 2.3 Mbps G.SHDSL Router

2707 Series: G.703 Clear Channel E1 NTU 2720 Series: T1/FT1 NTU

2156: 2.3 Mbps CopperLink Extender 1070: RS-232 19.2 kbps Synchronous SRM 2157: 4.6 Mbps CopperLink Extender 1080A: RS-232 57.6 kbps Async/Sync SRM

3241: 4.6 Mbps G.SHDSL Router

2158: 10 Mbps CopperLink Extender 1080A-64: RS-232 64 kbps Async/Sync SRM

1068: VDSL Modem

2168: 16 Mbps CopperLink Extender 1226: Parallel 115.2 kbps SRM

2172: 50 Mbps CopperLink Extender 1075: X.21 64 kbps Sync SRM

1226: RS-232 38.4 kbps Async SRM

visit us online
www.patton.com

SPECIFICATIONS

1001MP10
Front Panel: 10 independently operating slots Dimensions: 19 L x 6.75 W x 7 H in. (48.3 L x 17.15 W x17.78 H cm) Weight: 4.15 lbs (1.90 kg)

1001MP2
Front Panel: 2 independently operating slots Dimensions: 19.0 W x 2.63 H x 1.9 D in. (48.3 W x 6.68 H x 4.8 D cm) Weight: 2 lbs (0.95 kg)

ORDERING INFORMATION 1001MP2: 19-in. Horizontal 2-Slot Rack 1001MP10: 19-in. Vertical 10-Slot Rack

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--MINI-RACK PRODUCTS UNIVERSAL MOUNTING PANELS

16-Slot Universal Mounting Panel Model 1001MP16
Rack, stack, and organize with Patton's Multi-Functional Universal Mounting Panel. Rack up to 16 Patton MicroPak Devices into a dense 2U solution.

460 3/11 Data Tap
2120

2135

Rack-Mount any of Patton's MicroPak Products

1206

FEATURES & BENEFITS
Mount any MicroPak--Supports media converters, terminal servers, Ethernet bridges, fiber modems, CSU/DSUs, interface converters, short haul modems, and surge protectors
Low Profile-2U High--Universal Mounting Panel is only 2U (3.5 in. or 8.9 cm) high and holds up to 16 MicroPaks; Installs quickly into any standard 19 inch rack
Dry-erase label blocks and port identification numbers for easy circuit identification
Cost Effective--Adapt Patton MicroPak products you already own for use in a standard 19 inch rack, thereby eliminating the expense of upgrading to rackmounted equipment

The Model 1001MP16 Universal Mounting Panel offers the ability to rack-mount any of Patton's MicroPak products sideby-side. Products that are compatible with the 1001MP16 include Device servers, Media converters, Ethernet bridges, Fiber modems, Interface converters, and many more!

VoIP Micro-ATAs & AFAs

M-ATA

M-AFA

The sturdy 2U design of the 1001MP16 enables quick and hassle-free installation into any standard 19-inch rack. The 1001MP16's unique bracket-and-groove mounting system enables Patton MicroPak cases to be mounted securely into the panel. Dry-erase labels and individually numbered ports are provided for easy circuit/port identification. The Model 1001MP16 provides an economical method for converting your favorite Patton standalone MicroPak products into a customized rack-mounted solution.
Back View

Serial/Parallel Converters

2026P

2036P

Baluns
460 Series 462 Series 463 Series 465 Series

470 Series 471 Series 472 Series

Patton Product Compatibility Table

Device Servers 2120 Series 2120/A9

Serial Modems

1000R Series
1007 Series
1010R Series

1012AR Series 1017 Series 1052 Series

Ethernet Bridges

2121 Series 2135C Series

2124 Series 2135 Series

2130 Series

Data Taps

3/11

3/45

CSU/DSUs
2710 Series 2715 Series 2711 Series 2400 Series

Modem Eliminators 1205 Series 1206

Surge Protectors

503PC 534 Series 547 Series

570 Series 580 Series 552 Series

Interface Converters

1104 Series 2016 Series 2021 Series 2040 Series 2041 Series 2042 Series

2086 Series 2070 Series 2702 Series 2090 Series 2094 Series

and many more...

Unique bracket-and-groove system fastens the MicroPak securely into the panel

SPECIFICATIONS
Front panel: 16 Operationally independent slots Dimensions: 19L x 1.5W x 3.8H in. (48.3L x 3.8W x 8.9H cm) Weight: 1.1 lbs (0.5 kg)

Latching: 16 individual steel clips with hardware (Included with unit)
Power: None required. Some units may require individual power supplies

ORDERING INFORMATION 1001MP16: 19-inch, 16-Slot Mounting Panel 1001MP-PS8: 8-Barrel 5V, 4A Power Supply

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

ASYNC
DB-25, DB-9, DB-15
to 19.2 kbps 17 miles (27 km)

ASYNC/MULTIDROP
DB-25, DB-9
to 115.2 kbps 9 miles
(14.5 km)

Model 1000, 1009, 1015 Page 36

Model 1004A/1008 Page 37

SYNC & ASYNC
Low Speed
to 38.4 kbps 12 miles (19.3 km) Multi-Drop
Model 1040 Page 38

Basic

to 38.4 kbps 14 miles (22.5 km)

Model 1050 Page 40

LOW SPEED UNITS
Multipoint
to 115.2 kbps 14 miles (22.5 km)
Model 1060 Page 40

Long Range & Multipoint
to 64 kbps 17 miles (27 km)
Model 1080A Page 41

ASYNC RS-232
to 19.2 kbps 5 miles (8 km)
Model 1110A Page 43

ASYNC RS-485 ASYNC/SYNC RS-232

to 115.2 kbps 1.25 miles (2.01 km)

to 38.4 kbps 4 miles (6.4 km)

Model 1104 Page 43

Model 1140A Page 43

ASYNC
Null Modem Adapters
Model 6 Page 59

Typical Line-Driver Application See page 37

Server Model 1004A

Up to 9 miles (14.5 kilometers)

Model 1004A

SYNC & ASYNC
High Speed
to 64 kbps 6 miles (9.7 km)
Model 1045 Page 39

PARALLEL
Wire Speed 2,000 feet (610 m)
Model 1225 Page 39

INDUSTRIAL MODEMS FOR OUTDOOR USE

Temp: 32 to 158°F (0 to +70°C)

Temp: 14 to 158°F (-10 to +70°C)

Environmentally ruggedized sync./async.
baseband modems

Model 1065A (Standard Temp/Humidity) Page 42

Model 1065E (Extended Temp/Humidity) Page 42

Self-Powered Line Drivers

Powered Line Drivers

Fiber Modems

Miniature, Async./Sync. RS-232, Fiber Optic Modems . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Wireless Short-Range Modems

RS-232 Bluetooth Wireless Modem 2-Packs . . . . . . .44 EtherBITS Bluetooth IP Access Point . . . . . . . . . . . . .45

USB

WIRELESS

to 196 feet (60 m) over Cat5e cable
Model 110 Page 13

to 380 kbps 3,900 feet (1,188 meters)
Model 1013 Page 44

USB Extension Application

USB Device Cable (Keyboard, Mouse, Printer, Camera, etc.)
USB Type A female port

Connect USB plug to USB port on computer
USB Type A male port
See page 13 Built-in cable
(1 foot/0.3 m)

See page 13

Model 110 Remote Extender

RJ-45 jack

Standard category 5/5e/6
network cable

RJ-45 jack

Model 110 Local Extender

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS SELF-POWERED LINE DRIVERS

Industrial Solutions
PRODUCT GUIDE

Basic Point-to-Point Async SRMs Models 1000 & 1009

The Model 1000 async short range modem plugs directly into a DB-25 RS-232 port. A pair of Model 1000s supports distances up to 17 mi (27.4 km) at 1200 bps over two 19 AWG (0.9 mm) unconditioned twisted pairs. Operating at data rates up to 19.2 kbps, this cost saving device does not require AC power or batteries to operate. The Model 1000 is DCE/DTE switchable, and is compatible with the Patton Model 1009 (DB-9) and 1015 (DB-15).

The Model 1000S incorporates 600 watts per wire of built-in Silicon Avalanche Diode surge protection.
Rack card, DB-9 (EIA-574), & DB-15 versions are also available! The dual-port Model 1000RC rack card incorporates two Model 1000 short range modems. You can fit up to 32 SRMs in each 19-in. rack. The Model 1000RC card is available with RJ-11 or RJ-45 rear interface cards.

FEATURES & BENEFITS Range to 17 miles (27.4 km) on 19 AWG at 1,200 bps Data rates to 19,200 bps External DCE/DTE switch FCC Approved--Part 15 Class A

SPECIFICATIONS

Transmission Format: Async Data Rate: 0 to 19,200 bps (no strapping)
Control Signal: CTS (Pin 5) turns ON immediately after the terminal raises RTS (Pin 4); DSR (Pin 6) and DCD (Pin 8) turn ON immediately after the terminal raises DTR (Pin 20)
Transmit Line: 4 wire, unconditioned line (2 twisted pair)
Transmit Mode: Full duplex, 4-wire

Transmit Level: 0 dBm Line Connection: RJ-11 or RJ-45 jack or 5 screw terminal posts and a strain relief
Surge Protection: 600W power dissipation at up to 1 msec
Power: None required, uses ultra low power from EIA data and control signals
Dimensions: 2.20 x 1.75 x 0.75 in. (5.59 x 4.45 x 1.91 cm)

ORDERING INFORMATION 1000M: Male DB-25/terminal block 1000F: Female DB-25/terminal block 1000SM: DB-25, surge protected 1000F RJ11: DB-25/RJ-11 jack 1000M RJ45: DB-25/RJ-45 jack

1009M: Male DB-9/terminal block 1009F: Female DB-9/terminal block 1009SM: DB-9, surge protected 1009F RJ11: DB-9/RJ-11 jack 1009M RJ45: DB-9/RJ-45 jack)

Rack card supports two modems per card. 1000RC11: Dual Rack Card, RJ-45 DTE, RJ-11 line
1000RC45: Dual Rack Card, RJ-45 DTE, RJ-45 line

Transformer Isolated SRMs Guard Against Ground Loops Models 1010B, 1016 & 1019

Note: Other models (including DB-15) are available, call for details.
FEATURES & BENEFITS Immune to ground loops

The Patton Model 1010B async, 4-wire, transformer isolated short range modem is the best choice for data-only RS-232 connections between buildings. Capable of distances up to 9.5 miles, the Model 1010B's transformer isolation provides immunity from ground loops. 600 watts of built-in surge protection is standard. No AC power or batteries are required for operation.
SPECIFICATIONS

Rack card, DB-9, DB-15, & RJ-11 versions are also available! Patton has DB-9, DB15, RJ11 and rack-card versions! And they're all compatible with the Model 1010B up to 19.2 kbps!

Range to 8 miles (12.9 km) over 2 twisted pairs Asynchronous data rates to 115.2 kbps (Model 1010B only) Surge protection is standard (on Model 1010B only) External DTE/DCE switch Support async, point-to-point, RS-232, communication
over two twisted pairs Connects to DB-9 and DB-15 interfaces Compatible with Patton Model 1000 Transformer isolated Models 1016 and 1019 for
between-building applications

Transmission Format: Asynchronous, full duplex
Transmission Line: Two unconditioned twisted pair 1926 AWG

Interfaces: EIA RS-232, CCITT V.24
Data Rates: Low speed mode: 300 bps57.6 kbps; High speed mode: 2400 bps115.2 kbps

Isolation: Minimum 1500V RMS using custom transformers
Control Signals: DSR and DCD follow DTR from the terminal (DTE); CTS follows RTS from the terminal (DTE)

Surge Protection: 600W power dissipation
Connectors: DB-25 male or female on RS-232 side; RJ-11, RJ-45 or terminal block with strain relief on line side

Dimensions: 2.66 x 2.10 x 0.73 in. (6.7 x 5.3 x 1.9 cm)
Power Supply: None required; uses power from EIA data and control signals

Op. Temp: 32122°F (050°C) Altitude: 015,000 ft (04,572 m) Humidity: 5 to 95% non-condensing Weight: 2 oz. (56.8 grams)

ORDERING INFORMATION 1010BM: Male DB-25/terminal block 1010BF: Female DB-25/terminal block

1010BF RJ11: with RJ-11 jack 1010BM RJ45: with RJ-45 jack

Rack card supports two modems per card 1010RC11: Dual Rack Card, RJ-45 DTE, RJ-11 Line
1010RC45: Dual Rack Card, RJ-45 DTE, RJ-45 Line

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS SELF-POWERED LINE DRIVERS

High-Speed, Multipoint Short-haul Modem Models 1004A, 1004A Rack Card, & 1008

Still the best choice for high speed multidrop applications

The Model 1004A 2/4 wire short range modem (shown at right) gives you up to 50 terminal drops over one (half duplex) twisted pair, and supports async data rates up to 115.2 kbps. Great for same-building applications, the Model 1004A has high/low impedance settings, selectable RTS/CTS delay and a DTE/DCE switch. Plus, 600 watts of surge protection is standard.

The Model 1008 modem supports all the features of the popular Model 1004A, but with a DB9 (EIA-574) connector. Plug them directly into closely-spaced serial ports. They are even compatible with standalone and rackmount versions of the 1004A!

1004A rack card houses two SRMS! Plug 16 Model 1004A rack cards into a 2U Patton 1001 or 1000 rack system and get 32 short-range modems!

Typical application

FEATURES & BENEFITS Point-to-point full-duplex operation over 4 wires Multipoint (half-duplex) operation over 2 or 4 wires Multidrop up to 50 terminals Async. data rates to 115.2 kbps Range to 9 mi (14.5 km) on 19 AWG (0.9mm) at 1.2 kbps No AC power or batteries required
See Pg 30

SPECIFICATIONS

Transmission Format: Asynchronous
Data Rate: Up to 115,200 bps Transmit Line: 2, 4 wire unconditioned twisted pair
Transmit Mode: Full or half duplex Transmit Level: 0 dbm Range: Over 9 miles (14.5 km) Dimensions: 2.66 X 2.10 X 0.73 in. (6.8 X 5.3 X 1.9 cm)
Surge Protection: 600W power dissipation for up to 1 msec
Control Signals: DSR turns "ON" immediately after the terminal raised

DTR; DCD turns on after recognizing the receive signal from the line; CTS turns on 8 mSec after the terminal raises RTS
Power: None required, uses ultra low power from EIA data and control signals
Carrier: The carrier is a strap selected for either continuous operation or controlled by RTS

Host Typical application

Up to 50 Daisy Chained Terminal Devices

Server

Model 1004A

Up to 9 miles (14.5 kilometers)

Model 1004A

Data Rate (kbps)
115.2 38.4 9.6 1.2

Model 1004 & 1008 distance table, in miles (kilometers)

19 (0.9mm)
3.5 (5.6) 5.0 (8.0) 7.1 (11.4) 9.0 (14.5)

Wire Gauge

22 (0.6mm)
2.6 (4.2) 2.9 (4.7) 4.6 (7.4) 6.5 (10.5)

24 (0.4mm)
1.4 (2.3) 2.2 (3.5) 3.5 (5.6) 5.0 (8.0)

26 (0.2mm)
0.9 (1.4) 1.5 (2.4) 2.8 (4.5) 3.9 (6.3)

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

ORDERING INFORMATION 1004AM: Male DB-25/terminal block 1004AF: Female DB-25/terminal block 1004AFRJ11: with RJ-11 jack 1004AMRJ45: with RJ-45 jack 1004AMDR11: with dual RJ-11 1004AMDR45: with dual RJ-45 1004ARC11: Dual Rack Card, RJ-45 DTE, RJ-11 line: 1004ARC45: Dual Rack Card, RJ-45 DTE, RJ-45 line 1008M: Male DB-9/terminal block 1008F: Female DB-9/terminal block 1008FRJ11: with RJ-11 jack 1008MRJ45: with RJ-45 jack 1008MDR11: with dual RJ-11 1008MDR45: with dual RJ-45
Note: More models are available, check online at www.patton.com or call for details.
visit us online
www.patton.com

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS SELF-POWERED LINE DRIVERS

Industrial Solutions
PRODUCT GUIDE

Multidrop Transformer-Isolated Asynchronous Short-Range Modem Models 1012B & 1012ARC

Perfect for multidrop environments, transformer isolated for between-building applications.

The Model 1012B asyn- requires no AC power for operation. 600 watts

chronous short range per wire of silicon avalanche diode surge protec-

modem is ideal for mul- tion on the line side is standard.

tidrop environments or for applications requiring hardware control signals. Attaining DC isolation through custom-designed ferrite core transformers, the Model 1012B operates effectively between buildings. In a point-to-point application, the Model 1012B will operate full or half duplex up to 5.2 mi (8.4 km). Supporting data rates to 38.4 kbps, the Model 1012B

The Model 1012ARC is a rack-mountable version of the Model 1012A. Model 1012ARC plugs into Patton's 2U high 19 inch chassis and provides you with two short haul modems per card. And, they are available with RJ-11 or RJ-45 line connectors.
Model 1012 distance table, in miles (kilometers) Wire Gauge
Data Rate 19 (0.9mm) 22 (0.6mm) 24 (0.4mm)

SPECIFICATIONS

1,200 to 38,400 5.2 (8.4) 2.8 (4.5) 2.0 (3.2)

Trans. Format: Asynchronous Transmit Line: 4 wire unconditioned twisted pair Transmit Mode: Full or half duplex Transmit Level: -6 dBm

Control Signals: DSR turns "ON" immediately after the terminal raises DTR; DCD turns "ON" after recognizing the receive signal from the line; carrier is continuously "ON" or controlled by RTS; CTS turns "ON" 40 mSec after the terminal raises RTS

Surge Protection: 600W power dissipation at 1 mS
Data Rate: 0 to 38.4 kbps (no strapping)
Range: Up to 6 miles (9.7km), depending on wire gauge

Power: None required
Dimensions: 2.66" x 2.10" x 0.73" (6.8 x 5.3 x 1.9 cm)

FEATURES & BENEFITS Data rates to 38.4 kbps Supports 15 drops in a multipoint polling environment Transmits and receives one control signal each way Transformer isolated and surge protected External DCE/DTE switch
ORDERING INFORMATION 1012BFR11TB: Female DB-25; RJ-11 & terminal block 1012BMR11TB: Male DB-25; RJ-11 & terminal block 1012BFR45TB: Female DB-25; RJ-45 & terminal block 1012BMR45TB: Male DB-25; RJ-45 & terminal block 1012ARC11: Dual Rack Card, RJ-45 DTE, RJ-11 Line 1012ARC45: Dual Rack Card, RJ-45 DTE, RJ-45 Line
Note: More models are available, call for details.

Synchronous/Asynchronous Short-Range Modem Model 1040

Sync/async in a compact SRM.
The Model 1040 self-powered miniature short range modem packs the features of Patton's Model 1080 into a package that requires no AC power. Operating asynchronously or synchronously, the Model 1040 supports data rates to 38.4 Kbps and distances to 12 miles (19.3 km). The Model 1040 will operate over 2 or 4 wires, in point-to-point or multipoint environments. In synchronous mode, the Model 1040 supports internal, external or receive loopback clocking.
The Model 1040 incorporates two V.54 and two V.52 BER test modes, which can be activated via the RS-232 interface. Built-in LEDs let you monitor test mode operation.

Additional peace of mind comes from knowing that the Model 1040 has both transformer isolation and surge protection to guard against data loss. The Model 1040 is designed to plug directly into the RS-232 interface. Twisted pair wire is connected using RJ-11, RJ-45 or terminal blocks.

FEATURES & BENEFITS Async or sync operation RS-232 data rates to 38.4 kbps Distances to 12 mi (19.3 km) Point-to-point or multipoint 2-wire half duplex, 4-wire full duplex V.54 and V.52 test modes Internal, external or receive recover clocking (sync. mode) Transformer isolation and surge protection

SPECIFICATIONS
Range: 10 miles (16.1Km) @ 1200 bps on 22 AWG 2-pair wire Data Rates: Sync & Async: 1.2, 1.8, 2.4, 3.6, 4.8, 7.2, 9.6, 14.4, 19.2, 28.8, 38.4, externally switch selection Operation: Point-to-point or multipoint Transmit Mode: 2-wire/half duplex, 4-wire/full duplex

Connectors: DB-25 M, F (RS-232), RJ-11 jack and terminal block
Diagnostics: 100% V.54 compliant and 100% V.52 compliant BER tests
LED Indicators: BERT indicator, Loop/Test indicator
Interface: EIA RS-232, CCITT V.2

Carrier: Constantly ON or controlled by RTS
RTS/CTS Delay: Externally strap selected to 0.7, or 50 mS
Receive Clock: Derived from receive signal
Isolation: Transformer, 1500V RMS

Transmit Clock: Internal, external or looped back from recovered signal
Surge Protection: 600 watts power dissipation for up to 1 msec
Dimensions: 2.6 x .73 x 2.1 in. (6.6 x 1.9 x 5.3 cm)

ORDERING INFORMATION 1040M: Male DB-25/terminal block 1040F: Female DB-25/terminal block 1040SM: with surge protection 1040F RJ11: with RJ-11 jack 1040M RJ45: with RJ-45 jack
Note: More models are available, call for details.

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS SELF-POWERED LINE DRIVERS

See Pg 30

High Speed, Short-Range Modem (RS-232 & RS-530) Model 1045

Great for LAN-to-LAN or Tail Circuit Applications in Sync or Async Environments

The Model 1045 KiloModem is Patton's most capable plugin short haul modem to date. The Model 1045 supports both async and sync communication at switch selectable data rates of 32, 56 and 64 kbps. Deriving power from an external AC transformer, the Model 1045 supports distances

up to 6 miles/9.7 km (19 AWG at 32 kbps) over two unconditioned twisted pair. Synchronous transmit clock options are internal, external and receive recover clock. The Model 1045 includes V.54 loopback diagnostics and a built-in V.52 BERT pattern generator/detector. Transformer Isolation and surge protection guard against ground loops and transients. A rack mount version, the Model 1045RC, fits in Patton's 16 slot rack chassis and 2/4/8-slot ClusterBoxesTM.

SPECIFICATIONS

Transmission line: 1926 AWG (0.90.4mm) private unloaded twisted pair or unconditioned telephone company local area data (LAD) channels; (see AT&T specification 41028)
Data Rates: Async. 32, 56 and 64 kbps. Sync. 32, 56 and 64 kbps.
Carrier: Always on or controlled by RTS (point-to-point or multipoint operation)

Interface: EIA RS-232 or CCITT V.35 RTS/CTS delay: Switch-selected to 0, 7, or 53 mS
Diagnostics: 100% compliance with V.54 test modes (switch-selectable)
BERT: 100% compliance with V.52 including 511 & 511E bit pattern generation (switch-selectable)

Receive clock: Derived from receive signal
Transmit clock: Internal, external (from pin 24) or receive recover
Indicators: Status LEDs for TD, DCD,PWR and Test
Isolation: 1500V RMS via isolation transformers

Power supply: External wallmount transformer available with 120 or 230V
Surge suppression: 600W power dissipation
Dimensions: 3.55 x .2.1 x 78 in. (9.0 x 5.3 x 2 cm)

Data Rate
64,000 56,000 32,000

Model 1045 distance table, in miles (kilometers)

Wire Gauge

19 (0.9mm)

24 (0.5mm)

5.3 (8.5)

4.2 (6.7)

6.8 (10.9)

4.2 (6.7)

9.1 (14.6)

4.7 (7.5)

24 (0.4mm) 2.5 (4.0) 2.6 (4.2) 3.0 (4.8)

FEATURES & BENEFITS Async or sync operation
Data rates of 32, 56 & 64 kbps
Distances to 6 miles (9.7 km)
Built-In V.52 BER generator/detector
Internal, external or receive recover clocking in sync mode
Transformer isolation and surge protection
ORDERING INFORMATION
RS-232/V.24 Versions 1045/24M: RJ-11 Male DB-25/RJ-11 jack 1045/24F RJ-11: Female DB-25/RJ-11 jack 1045/24M RJ-45: Male DB-25/RJ-45 jack 1045/24F RJ-45: Female DB-25/RJ-45 jack
CCITT V.35 Versions 1045/35M RJ-11: Male DB-25/RJ-11 jack 1045/35F RJ-11: Female DB-25/RJ-11 jack 1045/35M RJ-45: Male DB-25/RJ-45 jack 1045/35F RJ-45: Female DB-25/RJ-45 jack
Async./Sync. Rack Card 1045RC11: DB-25 DTE & RJ-11 Line 1045RC45: DB-25 DTE & RJ-45 Line 1045RC4511: RJ-45 DTE & RJ-11 Line 1045RC4545: RJ-45 DTE & RJ-45 Line
Note: More models are available, call for details.

Self-Powered Line Extenders Model 1225 ParaLinkTM

Extend parallel communication to 2,000 feet (610 m) over a single twisted pair

The Model 1225 ParaLink answers a common office complaint: "Why can't we move our printer further away?" Using surface mount technology, the interfacepowered ParaLink converts parallel signals to serial and transmits them up to 2,000

feet (610 m) before converting them back to parallel. This overcomes the inherent distance limitations of parallel communication! What's more, the ParaLink transmits over a single pair of wires--no more bulky 25 or 36-conductor cables. Because the ParaLink lets you choose between BUSY and ACKNOWLEDGE handshaking modes, it is compatible with most parallel printers and sharing devices on the market.

ORDERING INFORMATION Terminal block version 1225TM: Transmitter, male DB-25 1225CRM: Centronics receiver, male 1225RM: Receiver, male DB-25 1225RF: Receiver, female DB-25

RJ-11 version 1225TMRJ11: Transmitter, male DB-25 1225CRM: Centronics receiver, male 1225RM: Receiver, male DB-25 1225RF: Receiver, female DB-25

FEATURES & BENEFITS Interface Powered--No AC Needed Switchable ACK/BUSY handshaking enhances printer
compatibility Accommodates "low power" printer interfaces DB-25 or Centronics connectors RJ-11, RJ-45 or terminal block twisted pair connection

SPECIFICATIONS
Interface: Centronics/IBM parallel (DB-25) Data Rate: 5 kbps (parallel)/40 kbps (serial) Range: Up to 2,000 feet (610 m) Transmit Line: One unconditioned twisted pair (2 wires) Transmit Mode: Half duplex Line Connection: RJ-11 or RJ-45 jack or 2 position terminal post and a strain relief

Interface Signals: Data bits 0-7, ground, busy or acknowledge (external switch selectable)
Power Supply: Interface powered, no AC power or batteries required
Dimensions: 2.67L x 2.10W x 0.74H in. (6.7L x 5.3W x 1.88H cm)

Note: More models are available, call for details.

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS POWERED LINE DRIVERS

See Pg 30

Industrial Solutions
PRODUCT GUIDE

AC Powered, Asynchronous SRM (up to 38.4 kbps) Model 1050

The Key Features You Need at a Price that Leaves a Small Footprint on Your Budget!
The Model 1050 AC Powered Asynchronous Short Range Modem is to our AC powered short haul line what the Model 1000 is to our interface powered line--a basic short haul at a great price! And the Model 1050 has the key features you need: optical isolation, a local loopback test mode, LED indicators and a DCE/DTE switch.

The Model 1050 supports asynchronous RS-232 data rates to 38.4 kbps, and supports distances up to 14 miles (22.5 km). Housed in an ultra-compact enclosure, the Model 1050 provides both an external RJ-11 jack and internal terminal block for line connection. On the RS-232 side, a female DB-25 is

standard. The Model 1050 is designed for point-to-point applications, with one unit on each end of the line. However, the Model 1050 is also compatible with the Patton Models 1060 and 1226 short hauls.

SPECIFICATIONS
Transmission Line: 19 to 26 AWG twisted pair Range: 4 Miles (6.4 Km) on two 24 AWG pairs

Serial Interface: EIA RS-232 /CCITT V.24, DB-25 female
Line Connection: RJ-11 and internal terminal block w/ strain relief
Data Rates: 1.2 to 38.4 kbps

Diagnostics: Local Loopback Indicators: Tri-state LEDs for RD, TD and Test
Power: External wallmount transformer available with 115 or 240V

Optical Isolation: 2500V RMS on DCE Interface
Dimensions: 1.58H x 4.16W x 3.75D in. (10.6H x 4.1W x 8.8D cm)

FEATURES & BENEFITS Asynchronous RS-232 operation over two twisted pair Data rates to 38,400 bps Optical isolation Loopback test Distances to 14 miles (22.5 km) DCE/DTE switchable Ultra-compact enclosure
ORDERING INFORMATION 1050-120: Async., Powered, Standalone: Short Haul Modem (120V) 1050-230: Async., Powered, Standalone: Short Haul Modem (230V)
Note: More models are available, call for details.

AC Powered, Asynchronous SRM (up to 115.2 kbps) Model 1060

The ideal choice for async UTP or STP applications!

The Model 1060 AC Powered, Asynchronous Short-Range Modem is Patton's most sophisticated async twisted-pair short haul. The Model 1060 adapts to a wide range of applications, while providing the resources to deal with less-than-optimum conditions. Supporting hardware or software flow control, the Model 1060 operates in point-to-point and multipoint. The Model 1060 handles data rates to 115.2 kbps, and supports distances to 14 miles (22.5 km) over two twisted pair.

Because the line side is optically isolated and surge protected, you can install the Model 1060 in environments where EMR or ground loops would normally prohibit twisted pair data communications. Assignable control signals and DCE/DTE switchability complete the picture.

FEATURES & BENEFITS Asynchronous RS-232 operation over two twisted-pair Data rates to 115.2 bps Optical isolation Loopback test Distances to 14 miles (22.5 km) DCE/DTE switchable Ultra-compact enclosure

Model 1050 & 1060 distance table, in miles (kilometers) Wire Gauge
Data Rate 19 (0.9mm) 24 (0.5 mm) 24 (0.4mm) 115.200* 1.8 (2.9) 0.75 (1.2) 0.38 (0.6) 57,000 2.5 (4.0) 1.3 (2.1) 0.95 (1.5) 38,400 3.7 (6.0) 1.5 (2.4) 1.33 (2.1) 19,200 4.17 (6.7) 1.9 (3.1) 1.42 (2.3)
9,600 5.41 (8.7) 2.6 (4.2) 2.08 (3.3) 4,800 7.05 (11.3) 3.8 (6.1) 2.84 (4.6) 2,400 11.5 (18.5) 7.0 (11.3) 4.83 (7.8) 1,200 14.0 (22.5) 8.5 (13.7) 5.68 (9.1)
* Model 1060 only.

SPECIFICATIONS
Transmission Format: Asynchronous Interface: RS-232 (CCITT V.24) DB-25 female Data Rate: 0 to 115.20 bps Transmission Line: 4-wire, unconditioned via RJ-11 or terminal blocks (RJ-45 optional)

Diagnostics: Loop 3 and 4, local and remote analog loopback
Indicators: Tri-state indicators for Transmit Data, Receive Data, Control In and Control Out
Power: Wall-mount, 12VAC, 200mA Dimensions: 4.17W x 1.52H x 5.0L in. (10.6W x 3.9H x 12.7L cm)

ORDERING INFORMATION 1060: Async., Powered, Standalone: Short Haul Modem (120V) 1060-220: Async., Powered, Standalone: Short Haul Modem (230V) 1060RC11: Async., Powered, Rack Card: w/ DB25 DTE & RJ-11 Line 1060RC45: Async., Powered, Rack Card: w/ DB25 DTE & RJ-45 Line 1060RC4511: Async., Powered, Rack Card: RJ-45 DTE, RJ-11 Line 1060RC4545: Async., Powered, Rack Card: w/ RJ-45 DTE & RJ-45 Line
Note: More models are available, call for details.

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS POWERED LINE DRIVERS

Universal Short Range Modem Models 1080A & 1080A-64

You can use the Model 1080A in just about any RS-232 UTP or STP application

The Model 1080A AC Powered, Universal Short Range Modem is the mainstay of our RS-232 short haul line, and it is now better than ever! Recent improvements in the Model 1080A include increased distances (up to 17 miles (27.4 km) on one or two unconditioned twisted pair), support for higher data rates (up to 57.6 kbps), and the addition of a built-in V.52 BER test pattern generator. Of course, the Model 1080A retains all the features that you have come to expect: asynchronous or synchronous RS-232 operation, half duplex communication over two wires or a choice of half or full duplex communication over four wires, support for point-to-point or multipoint applications, and fully compliant V.54 test modes (local analog loop and remote digital loop).
New automated features include equalization, gain control and noise filtering (a separate filter for each data rate is built into a custom VLSI chip). To combat the many nemeses of clear data transmission, the Model 1080A includes surge protection (guards against transients), transformer isolation (eliminates ground looping) and a new anti-streaming timer (stops data streaming).

The Model 1080A packs a lot of convenience into a tiny box: front panel LEDs give a clear picture of link status; V.54 tests can be activated remotely or via the front panel; and the unit can be externally configured (no need to open the case). Best of all, the Model 1080A standalone is fully compatible with the Model 1080A rack card and the new self-powered Model 1040 short haul.
Model 1080ARC rack cards are also available! The Model 1080ARC fits in Patton's 2U high rack chassis and 2/4/8 ClusterBoxesTM. Four plug-in rear interface cards are available.

FEATURES & BENEFITS Async or sync operation 4-wire half or full-duplex/2-wire half-duplex only RS-232 data rates to 57.6 kbps Distances over 17 miles (27.4 km) Point-to-point or multipoint V.54 and V.52 test modes Automatic equalization/gain control Internal, external, or received recover clocking in
sync. mode Custom VLSI noise filter chip Transformer isolation/surge protection Anti-streaming timer Fully compatible with the Model 1040 synchronous/asyn-
chronous short-range modem
I'm Maria, one of Patton's Sales Coordinators. If you have questions about our products, call +1 301.975.1000 or send email to sales@patton.com.

Model 1080A distance table, in miles (kilometers)

Data Rate

Wire Gauge

(kbps) 19 (0.9mm) 22 (0.6 mm) 24 (0.4mm)

57,600 12.0 (19.3) 7.0 (11.2) 5.3 (8.5)

38,400 13.0 (20.9) 7.5 (12.1) 6.2 (10)

19,200 16.0 (25.8) 8.5 (13.7) 7.0 (11.3)

9,600 18.5 (29.8) 13.0 (20.9) 10.4 (16.7)

4,800 19.5 (31.4) 14.0 (22.5) 11.3 (18.2)

2,400 20.5 (33.0) 15.0 (24.2) 11.6 (18.7)

1,200 20.0 (32.2) 15.0 (24.2) 11.4 (18.4)

See Pg 30

Model 1080A-64 distance table, in miles (kilometers)

Data Rate

Wire Gauge, in AWG (mm)

(kbps) 19 (0.9mm) 22 (0.6 mm) 24 (0.4mm)

64,000 11.0 (17.7) 6.5 (10.5) 5.0 (8.1)

32,000 13.5 (21.7) 7.5 (12.1) 6.4 (10.3)

16,000 16.5 (26.6) 10.0 (16.1) 8.4 (13.5)

SPECIFICATIONS
Range: 17.5 miles at 1200 bps, 19 AWG 2-pair wire Data Rates: Sync or Async: 1.2, 1.8, 2.4, 3.6, 4.8, 7.2, 9.6, 14.4, 19.2, 28.8, 38.4, and 57.6 kbps, externally switch selected Operation: Point-to-point or multipoint

Transmit Mode: Synchronous or asynchronous, 2-W/half duplex, 4-W/half or full duplex
Interface: EIA RS-232, CCITT V.24
Diagnostics: V.54 compliant local analog loopback & remote digital loopback; V.52 compliant 511 and 511E test pattern generator
LED Indicators: TD, RD, RTS, DCD, Power, Test

Carrier: Constantly ON or Controlled by RTS
RTS/CTS Delay: Strap selected: 0.0, 8.5 or 50 mS
Isolation: Transformer, 1500V RMS Connectors: DB-25 female (RS232), RJ-45 jack and terminal block (RJ11 optional)
Transmit Clock: Internal, external or receive recover

Surge Protection: SAD, 600W power dissipation
Power Supply: External transformer, 120V or 230V
Dimensions: 4.17W x 1.52H x 5.0L in. (10.6W x 3.9H x 12.7L cm)

ORDERING INFORMATION 1080: Async./Sync. Standalone Short Haul Modem (120V) 1080A-220: Async./Sync. Standalone Short Haul Modem (230V) 1080A-64-120: Async./Sync. 64k Standalone Short Haul Modem (120V) 1080A-64-230: Async./Sync. 64k Standalone Short Haul Modem (230V) 1080ARC11: Async./Sync. Rack Card with DB-25 DTE & RJ-11 Line 1080ARC45: Async./Sync. Rack Card with DB-25 DTE & RJ-45 Line 1080ARC4511:Async./Sync. Rack Card with RJ-45 DTE & RJ-11 Line 1080ARC4545:Async./Sync. Rack Card with RJ-45 DTE & RJ-45 Line
Note: More models are available, call for details.

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS POWERED LINE DRIVERS

See

Pg 30

Industrial Solutions
PRODUCT GUIDE

Industrial Short-Range Modem for Outdoor Use Model 1065

This environmentally enhanced, async. and sync., baseband modem provides reliable data communications--even in the harshest of environments.

The Model 1065 comes housed in a ruggedized chassis that includes extended-temperature components and protective treatments that make it ideal for use in harsh industrial settings such as railways, refineries, and manufacturing facilities.
With built-in transformer isolation and surge protection, the 1065 supports data rates to 64 kbps at distances over 12 miles (19.2 km)
For centralized data centers, users can cluster up to 14 1065RC modem rack cards in the Model 1001 rack chassis. The Model 1001 rack system includes redundant power supply options that protect against power-related failures, providing fault-tolerant operation.
Typical applications for the Model 1065 include using it in automatic train control systems where the modems relay data between central control sites and track-side control/monitoring equipment. This application requires equipment that is reli-

able in all weather conditions, because the electronic interlocking systems must continuously control wayside equipment such as signals, point machines, derailers, etc., in such a manner that trains run on time, and passengers and cargo travel safely to their destinations.

Traffic Monitoring Application

FEATURES & BENEFITS Environmentally ruggedized sync./async.
baseband modem
V.14 async. to sync. conversion, standard and extended rates.
Character lengths of 8, 9, 10, and 11 bits, start and stop bits included
Supports point-to-point or multi-point operation
Supports data rates up to 64 kbps at distances over 12 miles (19.2 km)
Supports 4-wire half- or full-duplex operation, or 2-wire half-duplex operation
Internal, external or received recovered sync clocking modes
Compliant with V.52 BER and V.54 test modes
High voltage transformer isolation/surge protection
ORDERING INFORMATION Ruggedized Industrial Baseband Modems 1065A/120/z: Async/sync, ruggedized, DB25F, RS-232, RJ-45 line, desktop, 120 VAC power 1065A/230/z: Async/sync, ruggedized, DB25F, RS-232, RJ-45 line, desktop, 230 VAC power 1065RC/A/B: Async/sync, DB25F, RS-232, RJ-45 line, rack card
Extended Environmental Industrial Baseband Modems 1065E/A/120/z: Async/sync, extended environmental, DB25F, RS-232, RJ-45 line, desktop, 120 VAC power 1065E/A/230/z: Async/sync, extended environmental, DB25F, RS-232, RJ-45 line, desktop, 230 VAC power 1065RCE/A/B: Async/sync, extended environmental, DB25F, RS-232, RJ-45 line, rack card
Note: More models are available, call for details.

SPECIFICATIONS
Transmission: Sync. or Async., 2wire/half-duplex, 4-wire/full- or halfduplex, point-to-point or multi-point operation. DTE Interface: RS-232/V.24, DB-25 female Line Interface: 2- or 4-wire UTP, 19-26 AWG

Data Rates: Switch-selectable 1.2, 1.8, 2.4, 3.6, 4.8, 7.2, 9.6, 14.4, 19.2, 28.8, 38.4, 57.6, 64 Kbps
Clocking: Internal, external, or receive recover
RTS Anti-stream Timer: Switchselectable for disabled, 12.5 sec, or 50 sec operation.

Diagnostics: V.52 compliant BER pattern (511/511E pattern) generator and detector with error injection mode; V.54compliant local analog and remote digital loopbacks, activated by front panel switch or RS-232 DTE interface
Carrier: Always-on or controlled by RTS; selectable RTS/CTS delay of no delay, 7, or 53 ms

Isolation: Transformer at 2000 VRMS; Extended models 200Meg. Ohm at 500VDC
Surge protection: Immune to IEC801-5 Level 2, 1kV
Power: 120/230 VAC switchable; IEC320 male-shrouded connector
Temp/Humidity: Standard models: 0 to +70°C

with 595% relative humidity, non-condensing Extended models: -10 to +70°C, 100% condensing humidity from -10 to +30°C; Absolute humidity from +30 to +70°C
Dimensions: 5.5W x 7.5D X 1.6H in. (13.9W x 19D x 4H cm)r

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS FIBER MODEMS

Miniature, Async/Sync RS-232, Fiber Optic Modems Models 1110A & 1140A

Have the noise and transient immunity of fiber optics in a miniature, self-powered package!

The Patton Model 1110A and 1140A miniature RS-232 fiber optic modems pack all the advantages of fiber into compact self-powered packages. When it comes to data communication integrity, optical fiber has several advantages over twisted pair copper:
· Copper wire requires shielding against RFI/EMI noise in many environments, whereas fiber is immune to RFI/EMI.
· In building-to-building applications, copper wire requires DC isolation to avoid ground looping. Fiber, since it does not have DC continuity, is not subject to ground looping.
· If a copper link passes through a field of energy created by a lightning strike, this transient energy will be conducted to the hardware at either end. But a fiber link will not pick up this harmful radiated energyit is immune to transients.
The Models 1110A and 1140A fiber modems have all of these advantages. Neither modem uses AC power or batteries to operate because they draw their power from the data and control signals on the RS-232 interface. Carrier may be internally switch selected for "Continuously On" or "Controlled by RTS".
The Model 1110A communicates in full or half-duplex over two fibers while supporting data rates to 19.2 kbps and distances up to 5 miles (8 km). It features an external DCE/DTE switch, which eliminates the need for RS-232 crossover cables. The miniature size of the Model 1110A allows it to fit in tight installation spaces.

The Model 1140A brings all the advantages of fiber to your network, plus 100% compliant V.52
and V.54 diagnostics. Besides communication integrity, the supports distances to 4 miles (6.4 km) and data rates to 38.4 kbps over two fibers. The 1140A operates async or sync--full or half duplex. While in synchronous mode, the fiber modem supports three clocking methods: internal, external, and receive recover.

Streamline your fiber cabling with

Patton's rackmount cards!

If several fiber links are running

into the same location, use the

1140ARC rack card. The Model

1140ARC sits in Patton's 16 slot

rack chassis, as well as Patton's

2, 4, and 8 slot ClusterBoxesTM.

Mid-plane architecture and "hot

swapping" capability allows dif-

ferent function/interface mod-

ules to be plugged in while the system is running.

Uses Patton's Self-Powered Fiber Technology.
Patented: U.S. Patent 4,151,540

Model 1104 Miniature Async RS-485 Fiber Optic Modem Also Available!

ORDERING INFORMATION 1110AM-ST: Mini Async Fiber Modem: Male DB-25 & ST Fiber 1110AF-ST: Mini Async Fiber Modem: Female DB-25 & ST Fiber 1110ARC-ST: Async Fiber Modem Rack Card: Female UD-26 & ST Fiber 1110A-26M/25M: UD-26 to DB-25 Male Cable 1110A-26M/25F: UD-26 to DB-5 Female Cable 1140AM-ST: Mini Async Fiber Modem : Male DB-25 & ST Fiber 1140AF-ST: Mini Async Fiber Modem: Female DB-25 & ST Fiber 1140ARC-ST: Async Fiber Modem Rack Card: Female UD-26 & ST Fiber

1140A-26M/25M: UD-26 to DB-25 Male Cable 1140A-26M/25F: UD-26 to DB-25 Female Cable 1104F-ST: Mini Async RS-485 Fiber Modem; Female DB-25; 100200 VAC 1104M-ST: Mini Async RS-485 Fiber Modem; Male DB-25; 100200 VAC 1104TB-ST: Mini Async RS-485 Fiber Modem; Terminal Block; 100200 VAC
Note: More models are available, call for details.

FEATURES & BENEFITS
Models 1110A & 1140 1110: Async., RS-232 operation/ 1140: Async/Sync RS-232 Full or half duplex 1110: Data rates up to 19.2 kbps; 1140: Up to 38.4 kbps 1110: Range up to 5 miles (8 km); 1140: Up to
4 miles (6.4 km) Continuous or controlled carrier External DCE/DTE switch Very thin case (0.75 in./1.9 cm) for closely spaced com-
puter ports EMI/RFI and transient immunity No AC power required ST connector options 1140: V.52 and V.54 loopback test modes 1140: Internal, external or received loopback clocking in
sync mode
Model 1104 Async. or sync. RS-232 operation Dual fiber optic interface Data rates to 38.4 kbps Range up to 4 miles (6.4 km) No AC power required Continuous or controlled carrier ST connector options

SPECIFICATIONS

Model 1110A & 1140A Transmission Line: Dual multimode optical cable
Transmission Mode: 1110: Async., full or half duplex; 1140: Sync or async, full or half duplex
Range: 1110: 5 miles (8 km); 1140: 4 miles (6.4 km) over continuous fiber (with attenuation 2.5 dB/km). Over continuous fiber (with attenuation 2.5 dB/km)
Receiver Sensitivity:--42 dBm Coupled Output Power: -18 to -24 dBm (depending on fiber specs)
Optic Wavelength: 850 nm Indicators: One LED indicates transmission of data
Interface: EIA RS-232/CCITT, V.24 male or female connectors
Data Rates: 1110: 019.2 kbps; 1140: 038.4 kbps
Power: Derived from EIA data and controls
Dimensions: 1110: 2.66 x 2.10 x 0.73 in. (6.8 x 5.3 x 1.9 cm)
1140: 3.55 x 2.1 x 0.73 in. (6.8 x 5.3 x 1.9 cm)

Model 1140A RS-485 Serial Interface: One DB-25 Male, DB-25 Female, or Terminal Block Serial Transmission: RS-485 Asynchronous, 0 to 115.2 Kbps Fiber Interface: ST style fiber connectors (TX and RX) Transmission Line: Dual multimode optical cable, optimized to work with 62.5/125 micron fiber850nm wavelength Range: Up to 1.25 miles (2.01 km) Power Budget: 12dB with 62.5/125 micron fiber Power Supply Options: External Universal Power Supply (100240 VAC) Temperature: 32 to 122°F (0 to 50°C) Altitude: 015,000 ft (04,572 km) Humidity: Up to 95% non-condensing Dimensions: 3.0L x 1.8W x 0.8H in. (7.6L X 4.4W X 1.9H cm) Weight: 2 oz. (57 g)
Note: Country specific power cords are ordered separately.

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS WIRELESS SHORT RANGE MODEMS

Industrial Solutions
PRODUCT GUIDE

RS-232 Bluetooth Wireless Modem 2-Packs Model 1013

The Model 1013 provides hassle-free wireless RS-232 connections with line rates up to 380 kbps at distances up to 3,900 feet (1,188 meters)!

Patton's newest short range modem, the Model 1013, is a wireless serial short range modem that connects RS-232 devices using Bluetooth V.1.1 technology. The Model 1013 eliminates the hassle and expense of running a dedicated cable connection between RS-232 devices thus giving installers, maintenance workers, and others the ability to remotely monitor and control RS-232 devices.

through a user-friendly Windows utility application, standard AT commands, or by DIP switch and push buttons. The 1013 includes a plug-and-play auto-pairing button that will automatically link two Model 1013s for a dedicated point-topoint connection.
Serial connections are provided by an RS-232C DB-9 connector. Bluetooth transmits over the built-in stub antenna at distances up to 328 feet (100 meters). For greater distances, Patton offers optional dipole and patch antennas that can increase the wireless RS-232 range up to 3,280 feet (1,188 meters)!

The Patton Model 1013 supports point-to-point and point-to- Patton's wireless RS-232 short range modems effectively multipoint connections. Users can configure the Model 1013 eliminate the expense and hassle of cables!

FEATURES & BENEFITS
RS-232 Serial Cable Replacement--Wireless RS-232 connections can be made over 3,900 feet (1,188 meters) at line rates up to 380 kbps
Auto-Pairing Feature--Unique feature that enables plugand-play installations
Windows Utility Configurable--Clear and concise tool for fine tuning your wireless RS-232 connections
Bluetooth Protocols Supported--RFCOMM, L2CAP, SDP
Interface Powered--No external power supply required for operation

10-BT-PAT

10-BT-DAT

Application diagram Model 1013
Serial printer
Model 1013

HVAC control

10-BT-UPA

10-BT-DPA

ORDERING INFORMATION

1013: Wireless RS-232 Short Range Modem 1013-2PK: Wireless RS-232 Short Range Modem Extender Kit

Accessories 10-BT-SAT: Bluetooth Stub Replacement Antenna 10-BT-DAT: Bluetooth Dipole Antenna 10-BT-PAT: Bluetooth Patch Antenna 10-BT-UPA: Bluetooth USB to Power Adapter Cable 10-BT-DPA: Bluetooth DC to Power Adapter Cable 10-BT-CBL-1: Bluetooth 1M Antenna Extension Cable

Service Tech's Laptop
Bluetooth enables wireless RS-232 connections, making installations and service calls more efficient by eliminating the time, hassle, and expense of cable runs.

Antenna Distance Chart

Default Antenna to Default Antenna Default Antenna to Dipole Antenna Dipole Antenna to Dipole Antenna Patch Antenna to Dipole Antenna Patch Antenna to Patch Antenna

328 feet (100 meters) 492 feet (150 meters) 656 feet (200 meters) 1,312 feet (400 meters) 3,937 feet (1,200 meters)

SPECIFICATIONS

Bluetooth v1.1 Specifications: Power Class: Class 1 RF Range: Standard stub antenna up to 328 feet (100m) Bluetooth Protocol: RFCOMM, L2CAP, SDP Frequency: 2.42.4738 GHz Baud Rate: Up to 380 kbps Serial Specifications Serial Interface: EIA RS-232C

Connector Type: DB-9 Female Baud Rate: 1,200 bps to 230.4 kbps Hardware flow control: ON/OFF General Product Specifications Operating Temperature: -4 to 158°F (-20 to 70° C) Dimensions: 2.5L x 1.20W x 0.63H inch (63L x 30W x 16H mm) Weight: 0.1 lbs (0.06 kg)

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--LINE DRIVERS & MODEM ELIMINATORS BLUETOOTH IP ACCESS POINT

EtherBITSTM Bluetooth IP Access Point Model 2188

The Model 2188 provides hassle-free wireless Bluetooth to IP connections for up to 7 Bluetooth devices

Patton's Model 2188 enables up to 7 Bluetooth devices to simultaneously connect to any 10/100Base-TX Ethernet Network. Using the 2188 in conjunction with the Model 1013 eliminates the hassle and expense of running a dedicated cable connection between RS-232 devices thus giving installers, maintenance workers, and others the ability to remotely monitor and control RS-232 devices.

Versatile host modes allow for a wide variety of user applications such as, TCP Server and Client modes for TCP/IP-Bluetooth replay applications, Vertex mode for multicasting, repeater mode, serial hub mode, and RS-232 mode.
The Model 2188's flash memory allows for easy field upgradeable software upgrades. A built in web server and

The Model 2188 supports multiple Bluetooth profiles for the web interface allows for simple installation and remote conserial port, dial-up networking, LAN access and PAN. figuration and management.

FEATURES & BENEFITS
RS-232 Serial Cable Replacement--Bluetooth connections can be made over 3,280 feet (1,000 meters).
Wide Variety of supported Bluetooth Profiles--Serial Port, LAN Access, PAN and Dial up Networking.
Supports Many Applications & Host Modes--TCP Server & Client, Vertex mode, Repeater mode, and RS-232 modes.
Network Protocols Supported--HTTP/FTP/Telnet/IP Sharing/DHCP/PPP/RADIUS Authentication SNMP v1/v2/v3

10-BT-PAT

10-BT-DAT

Application diagram

10-BT-UPA

10-BT-DPA

Serial printer

Model 1013

Service Tech's Laptop

HVAC control

Model 2188

Bluetooth enables wireless RS-232 connections, making installations and service calls more efficient by eliminating the time, hassle, and expense of cable runs.

Antenna Distance Chart

Default Antenna to Default Antenna Default Antenna to Dipole Antenna Dipole Antenna to Dipole Antenna Patch Antenna to Dipole Antenna Patch Antenna to Patch Antenna

328 feet (100 meters) 492 feet (150 meters) 656 feet (200 meters) 1,312 feet (400 meters) 3,937 feet (1,200 meters)

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

1013
ORDERING INFORMATION 2188/EUI: EtherBITS Bluetooth to IP Access Point
Accessories 1013: Wireless RS-232 Short Range Modem 10-BT-SAT: Bluetooth Stub Replacement Antenna 10-BT-DAT: Bluetooth Dipole Antenna 10-BT-PAT: Bluetooth Patch Antenna 10-BT-UPA: Bluetooth USB to Power Adapter Cable 10-BT-DPA: Bluetooth DC to Power Adapter Cable 10-BT-CBL-1: Bluetooth 1M Antenna Extension Cable

SPECIFICATIONS

Ethernet Interface: 10/100BaseTX connection via RJ45 · Static IP and Dynamic IP address
Bluetooth Interface: Bluetooth V1.1; Class 1 · Level: -18dBM · Profiles: Serial Port, LAN Access, PAN, Dial up Networking · Distance: 321,312 feet (10400 meters) · Protocols Supported: HTTP; FTP, Telnet, DHCP client; SNMP v1/v2/v3; PPP server and PPP tunneling; RADIUS ·

Management: Windows Utility; Web, Telnet, Console; Modem AT command set · Diagnostic LEDs: Power, Status, Error, NET and EXP General Product Specifications: Operating Temperature: 40122°F (550° C) · Dimensions: 5.8L x 4.4W x 1.3H inch (147 L x 112 W x 32H mm) · Weight: 0.5 lbs (225 g)

visit us online
www.patton.com

INTERFACE POWERED
RS-232 to RS-422 RS-232 to RS-485

SELF POWERED
RS-232 to TTL

These tiny converters are the size Enables async. RS-232 and RS-485 of a DB-25 (or DB-9) backshell! to communicate with handshaking

Async. transmit & receive data signals only
Operates at rates up to 19,200 bps

Operates at rates up to 115,200 bps
Opto-isolation available Range up to 9 mi. (14.5 km)

Models 222N, 222N, 222NRC Page 47

Models 2084, 2085, 2086, 2089 Page 48

Enables async. RS-232 devices to communicate with TTL devices
Operates bi-directionally at rates up to 320 kbps
Data and control signals independently selectable for inverting/non-inverting
Model 2002 Page 47

Async./Industial Converters

Interface Powered, RS-232 to RS-485 Interface Converters (Transmit & Receive Data Only) . . . . . . . . .47 Self-Powered RS-232 to TTL Converter . . . . . . . . . . . . .47 Interface Powered, RS-232 to RS-485 Interface Converters (with Handshaking) . . . . . . . . . . . . . . . . . .48 RS-232 to Current Loop Converters (20 or 60 mA) . . . .50 RS-232 to 20 mA Current Loop Converters (DB-25 to DB-25) . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Auto-Directional Serial to Parallel Converters . . . . . . . . .51 Compact Interface Serial to Parallel Converters . . . . . . .51

Video Baluns

CCTV Passive Baluns

CCTV Passive Pass-Thru Baluns

CATV Passive Baluns

AUTO-DIRECTIONAL SERIAL TO PARALLEL

RS-232 to RS-422

These converters automatically select parallel/serial mode and come with a built-in 6 foot (1.8 meter) cable

These tiny converters automatically sense and select parallel/serial and DCE/DTE modes

Data rates to 38.4 kbps (Models 2025 & 2029) or up to 115.2 kbps (Models 2035 & 2039)
Automatic DCE/DTE mode selection Link Status LED indicator

Data rates from 300 bps to 38.4 kbps (Models 2026 & 2027) or up to 115.2 kbps (Models 2036 & 2037)
Automatic DCE/DTE mode selection External configuration switches

Models 2025, 2029, 2035, 2039 Page 51

Models 2026, 2027, 2036, 2037 Page 51

Enables async. RS-232 devices to communicate with active or passive 20mA or 60mA current loop devices
Data rates to 115.2 kbps Up to 4 mi. (6.4 km) on two twisted pair)
Model 2017 Series Page 50

CCTV PASSIVE

BNC to TB/RJ-45

RJ-45 Pass-Thru

CATV PASSIVE
RJ-45 or Terminal Block

Pass a single composite CCTV video signal via unshielded twisted pair
Connect twisted pair using RJ-45 or terminal block
Distances up to 2,230 ft. (680 meters) over Cat 5 cable
Model 310 Series Page 52

Pass power, PTZ, and video over a single 4-pair Cat 5 cable
Power, Video, and Control signals pass-thru
Distances up to 2,230 ft. (680 meters) over Cat 5 cable
Model 320 Series Page 53

Transmit a CATV, VHF, or FM video signal via twisted pair cable
Connect twisted pair using RJ-45 or terminal block
Distances up to 328 ft. (528 meters) over Cat 5 cable
Model 330 Series Page 53

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--INTERFACE & MEDIA CONVERTERS ASYNC/INDUSTRIAL CONVERTERS

Interface-Powered, RS-232 to RS-422 Converters (Transmit & Receive Data Only) Models 222N, 222N9, & 222NRC

These miniature converters are no bigger than a DB-25 (or DB-9) backshell!

The Model 222N Series of converters comes in three versions: the Model 222N, 222N9, and 222NRC.
The Model 222N enables an RS-232 device with DB-25 port to connect to an RS-422 device--at distances up to 4,000 ft (1,219 m) away--over two twisted-pair wires. The Model 222N9 does the same thing for an RS-232 device with a DB-9 port (now called EIA-574).

The Model 222NRC is a dual port rack card version of the Model 222N, with two converters in one card! The front card
incorporates 13 status LEDs, while the rear card presents four RJ-11 or RJ-45 connectors for hardware connection. The Model 222NRC fits in Patton's 16-slot rack chassis and our unique line of 2-, 4, and 8-slot ClusterBoxesTM.

FEATURES & BENEFITS Converts EIA-232 data to EIA-422 Async. transmit & receive data signals only EIA-232 control signals wired together Operates at rates up to 19,200 bps No AC power or batteries required DCE/DTE selectable interfaces Virtually any connectorization available
RS-232 to 422 converter
4,000 ft (1,219 m)

ORDERING INFORMATION Examples of DB-25 and DB-9 versions
See Pg 30
DB-25 versions 222NM: Male DB-25 with terminal block (TB) 222NF: Female DB-25 with TB 222NF RJ11: With RJ-11 jack 222NM RJ45: With RJ-45 jack 222NM-25F: With DB-25 male to female 222NF-25F: With DB-25 female to female 222NSF: With surge protection

DB-9 versions 222N9M: Male DB-9 with TB 222N9F: Female DB-9 with TB 222N9F RJ11: With RJ-11 jack 222N9M RJ45: With RJ-45 jack 222N9SF: With surge protectio
Rack card versions (two converters per card) 222NRC11: Dual Rack Card, RJ-11 222NRC45: Dual Rack Card, RJ-45
Note: Many other models are available, check online at www.patton.com or call for details.

RS-232 Host

Model 222N

RS-422 Terminal

SPECIFICATIONS

Data Format: Asynchronous Data Rate: 0 to 19,200 bps (no strapping)
Control Signals: (RS-232 Side) RTS wired to CTS; DTR wired to DSR and DCD
Transmit Mode: Full duplex, 4-wire
DTE/DCE Switch: On standalone Model 222N version only
CE Approved: Yes Power Supply: None required; uses ultra low power from EIA data and control signals

Connectors: Model 222N--Male or female DB-25 (232 side); Male or Female DB-25, RJ-11 jack, RJ-45 jack or terminal posts (422 side).
Model 222N9--Male or female DB-9 (EIA-574 side); RJ-11 jack, RJ-45 jack or terminal posts (422 side).
Dimensions: Model 222N 2.20 x 1.75 x 0.75 in. (5.6 x 4.4 x 1.9 cm)
Model 222N9 2.50 x 1.20 x 0.75 in. (6.4 x 3 x 1.9 cm)

Self-Powered RS-232 to TTL Model 2002

Now async RS-232 devices can communicate bi-directionally with TTL devices

The Model 2002 RS-232 to TTL interface converter lets an async RS-232 device communicate bi-directionally with an asynchronous TTL device. Supporting data rates up to 230 kbps, the Model 2002 passes data (TD, RD) plus five control signals (CD, DTR, DSR, CTS and RTS). In addition, the

Model 2002 allows data and control signals to be independently jumper-selected as inverting or non-inverting. The Model 2002 is available DCE-to-DTE and DTE-to-DCE.

Typical application Model 2002 Multipair Cable
RS-232 DTE

TTL DCE

SPECIFICATIONS

Humidity: Up to 95% non-condensing
Power Supply: None required; uses power from RS-232 and TTL data and control signal

Dimensions: 2.24L x 2.1H x 0.7W in. (5.6L x 5.3H x 1.8W cm)
Weight: 1.7 oz. (48.2g)

FEATURES & BENEFITS Supports data rates to 230 kbps
Passes TD & RD plus five control signals: CD, DTR, DSR, CTS & RTS
Data and control signals independently selectable for inverting/non-inverting
RS-232 interface is a DB-25 female, TTL interface is a DB-25 male
ORDERING INFORMATION 2002FC-MT: RS-232 (DB-25 female/DCE) to TTL (DB-25 male/DTE) 2002FT-MC: RS-232 (DB-25 female/DTE) to TTL (DB-25 male/DCE)
Note: Other models are available, check online at www.patton.com or call for details.

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--INTERFACE & MEDIA CONVERTERS ASYNC/INDUSTRIAL CONVERTERS

Industrial Solutions
PRODUCT GUIDE

Interface Powered, RS-232 to RS-485 Interface Converters (with Handshaking) Models 2084, 2085, 2086, & 2089

Connect a DB-25 or DB-9 equipped PC or workstation to RS-485 data acquisition & control equipment.

The Model 208X Series of RS-232 to RS-485 converters include the Model 2085 DB-25 4-wire converter, Model 2089 DB-9 4-wire converter, Model 2084 DB-25 2-wire converter, Model 2086 DB-25 converter with built-in opto-isolation, and the Model 2085RC rack card.
The Model 2085 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over one or two unconditioned twisted pair. Passing one control signal in each direction, the Model 2085 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2085 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, silicon avalanche diodes provide 600 watts per wire of protection against harmful data line transient surges.
The Model 2089 is Patton's first high speed EIA-574 (RS232 on a DB-9) to RS-485 interface converter. Offering the

same features as the Model 2085, except in a smaller DB-9 package, it supports async data rates to 115.2 kbps over one or two unconditioned twisted pair. The Model 2089 also han-
dles up to 50 terminal drops in a multipoint polling environment; yet it is small enough to plug directly into a DB-9 serial port...and requires no AC power or
batteries for operation. We've even managed to squeeze silicon avalanche diode surge protection into its tiny
case. Amazing!
The Model 2084 provides 2wire conversion of RS-232 to RS-485. Otherwise, the unit has the same features as the Model 2085.
The Model 2086 DB-25 RS-232-to-RS-485 converter provides opto-isolation.
The Model 2085RC is a dual port rack card version of the Model 2085, with two converters in one card! The front card incorporates 13 status LEDs, while the rear card presents four RJ-11 or RJ-45 connectors for hardware connection. The Model 2085RC fits in Patton's 16-slot rack chassis and our unique line of 2-, 4-, and 8-slot ClusterBoxesTM.

FEATURES & BENEFITS Fully conforms to the EIA-232 and EIA RS-485 standards Operates asynchronously, point-to-point or multipoint,
over 2 or 4 wires (Model 2084 is 2-wire only) Data rates to 115,200 bps Range up to 9 mi. (14.5 km) when used in pairs Selectable RTS-CTS delay Selectable high/low impedance Operates with or without "echo" Up to 50 terminal drops in a multi-point polling environment No AC power or batteries required 600 watts of silicon avalanche diode surge protection Model 2086 features opto-isolation

SPECIFICATIONS

Transmission Format: Asynchronous
Data Rate: Up to 115,200 bps RS-232 Interface: DB-25, male or female (DCE/DTE switchable) DB-9, male or female (Model 2089)
RS-485 Interface Options: DB25, male or female; RJ-11 or RJ-45 jack; terminal block with strain relief
RTS/CTS Delay: 0 or 8 msec Carrier: The carrier is switch selected either continuous operation or controlled by RTS

Control Signals: DSR turns "ON" immediately after the terminal raises DTR; DCD turns "ON" after recognizing the receive signal from the line; CTS turns "ON" after the terminal raises RTS.
Power: Draws operating power from RS-232 data and control signals; no AC power or batteries required.
Temperature: 32122°F (050°C)
Size: 2.66 x 2.10 x 0.73 in. (6.8 x 5.3 x 1.9 cm)

Rack Mountable Units, Too! These rack cards each contain two converters, so you can fit up to 32 converters in a 19 in. rack.

Versions available for 2-wire RS-485 operation OR built-in opto-isolation.

visit us online
www.patton.com

Two converters in one rack card!

See page 30

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--INTERFACE & MEDIA CONVERTERS ASYNC/INDUSTRIAL CONVERTERS

Line Rate (bps) 1200 9600 38.4 k
115.2 k

19 AWG (0.9mm)

feet

miles km

47520

9.0

14.5

36960

7.0

11.2

26400

5.0

8.0

18480

3.5

5.6

Transmission Distances

22 AWG (0.6mm)

24 AWG (0.5mm)

feet miles km feet miles km

34320 6.5 10.5 26400 5.0

8.0

24288 4.6 7.4 18480 3.5

5.6

15312 2.9 4.7 11616 2.2

3.5

13728 2.6 4.2 7392 1.4

2.3

26 AWG (0.4mm) feet miles km 21120 4.0 6.4 14784 2.8 4.5 7920 1.5 2.4 4752 0.9 1.5

Distances for the Models 2085 and 2089 when used in pairs.

RS-232 to RS-485 conversion PC
with Serial Port Model 2085/2089

Up to 9 miles (14.5 kilometers)

Connecting RS-232 and RS-485 devices in a multi-drop environment

RS-485 Industrial Equipment

2085

2085 2085

Multipoint Polling PC

Conveyor Belt

Time Clock

Robot Automation

ORDERING INFORMATION Model 2085--4-wire DB-25 versions 2085M: Male DB-25 with terminal block 2085F: Female DB-25 with terminal block 2085X-RJ11: With RJ-11 jack 2085X-RJ45: With RJ-45 jack 2085X-DR11: With Dual RJ-11 jacks 2085X-DR45: With Dual RJ-45 jacks 2085X-25F: With DB-25 female 2085X-25M: With DB-25 male
Example 2085M-RJ11: Male DB-25, RJ-11 jack
Model 2089--DB-9 versions 2089M: Male DB-9 with terminal block 2089F: Female DB-9 with terminal block
Note: X = Male or female

2089X-RJ11: With RJ-11 jack 2089X-RJ45: With RJ-45 jack 2089X-DR11: With Dual RJ-11 jacks 2089X-DR45: With Dual RJ-45 jacks 2089X-25F: With DB-25 female 2089X-25M: With DB-25 male
Rack card versions (two converters per card) 2085RC11: Dual Rack Card, RJ-11 2085RC45: Dual Rack Card, RJ-45
Model 2084--2-wire DB-25 versions 2084M: Male DB-25 with terminal block 2084F: Female DB-25 with terminal block 2084X-RJ11: With RJ-11 jack 2084X-RJ45: With RJ-45 jack

2084X-DR11: With Dual RJ-11 jacks 2084X-DR45: With Dual RJ-45 jacks 2084X-25F: With DB-25 female 2084X-25M: With DB-25 male
Model 2086--Opto-Isolated DB-25 versions 2086M: Male DB-25 with terminal block and power supply 2086F: Female DB-25 with terminal block and power supply 2086X-RJ11: With RJ-11 jack 2086X-RJ45: With RJ-45 jack 2086X-DR11: With Dual RJ-11 jacks 2086X-DR45: With Dual RJ-45 jacks 2086X-25F: With DB-25 female 2086X-25M: With DB-25 male

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--INTERFACE & MEDIA CONVERTERS ASYNC/INDUSTRIAL CONVERTERS

Industrial Solutions
PRODUCT GUIDE

RS-232 to Current Loop Converters (20mA or 60mA) Model 2017 Series

Whether your current loop device is active or passive, we've got your converter!

The Patton Model 2017 Series of current loop converters lets an async. RS-232 device communicate with a 20mA or 60mA current loop device. The interface-powered Model 2017P (20mA) and 2017P60 (60mA) operate passively, and therefore are suitable for connection to active current loop devices. The AC-powered Model 2017A works with either active or passive 20mA current loop devices. All models support distances to 4 miles (6.4 km) and data rates to 115.2 kbps. In addition, all models are optically isolated, surge protected and DCE/DTE switchable. The Model 2017A also provides three LED indicators. Twisted pair running to the current loop device

attaches by RJ-11 jack, RJ-45 jack or terminal blocks.
The Model 2017RC is an async device that operates bi-directionally in full- or half-duplex
modes. The Model 2017RC occupies one slot of the 1000R/16 front-load
rack. It has dual independent converters that enable two async DTE RS-232 devices to communicate with two 20-mA current loop devices over two twisted pairs. It can be configured for active or passive transmitters.

SPECIFICATIONS

Transmission Line: 19 to 26 AWG (.9 to .4mm) twisted pair
Range: 4 miles on 24 AWG (.5mm) wire
Interfaces: Async., EIA RS-232, CCITT V.24 full duplex, 20mA or 60mA current loop
LEDs: (Model 2017A only)--TD (Transmit Data) and RD (Receive Data)

Connectors: DB-25 male or female on RS-232 side RJ-11, RJ-45 or terminal posts with strain relief for current loop side
Data Rates: up to 115,200 bps
Isolation: 2500V RMS via opto-isolators

Surge Suppression: Over-voltage protection for opto-isolators via silicon avalanche diodes
Op. Temp.: 32122°F (050°C) Altitude: 015,000 feet Humidity: Up to 95% non-condensing Power Supply: Model 2017A--9V to 12V on pin 9 of RS-232 interface or

external wall mount transformer; Model 2017P and 2017P60--None required; uses power from interface data signals
Dimensions: 2.50L x 1.2H x 0.75W in. (6.4L x 3H x 1.9W cm)
Weight: 1.5 oz. (43 grams)

RS-232 to 20mA Current Loop Converter (DB-25 to DB-25) Model 2018

See page 30

This optically isolated converter performs multiple functions

The Model 2018 is a multi-function converter. Connect it to an connects directly to

active 20mA current loop circuit and it becomes a passive con- the RS-232 inter-

verter. Attach it to a passive 20mA current loop circuit, add DC face or the 20mA cur-

power to one of several DB-25 interface pins, and it functions rent loop interface using

as an active converter. Connect two units together, supply DC a male or female DB-25

power to one interface, and you have an optically isolated RS- connector. An external

232 distance extender.

DCE/DTE switch elimi-

The Model 2018 supports data rates to 19.2 kbps, and cur- nates the need for RSrent loop distances to 4 mi. (6.4 km) over two twisted pair. It 232 crossover cables.

SPECIFICATIONS
Interfaces: Asynchronous Transmit Line: 1926 AWG (.9.4mm) Range: 4 mi. (6.4 km) on 24 AWG twisted pair

Interfaces: EIA RS-232, CCITT V.24 (.5 mm) full duplex, 20mA current loop
Data Rate: 5019.2 Kbps Isolation: 2500V RMS via opto-isolators on line side

Connectors: Male or female DB-25 on both sides
Op. Temp.: 050°C (32122°F) Humidity: Up to 95% non-condensing Power Supply: None required; uses power from NIC data signals

Dimensions: 2.21L x 0.8H x 2.10W in. (5.6L x 2.0H x 5.3W cm)
Weight: 1.7 oz. (48.2g)

FEATURES & BENEFITS Data rates to 115.2 kbps Up to 4 mi. (6.4 km) on two 24 AWG (.5mm) twisted pair Model 2017P & 2017P60 work with active 20mA or
60mA receivers Model 2017A works with active or passive 20mA receivers Externally accessible DCE/DTE switch Optically isolated and silicon avalanche diode
surge protected
ORDERING INFORMATION 2017PM: RS-232 to 20 mA (passive) DB-25M with terminal block) 2017PF: RS-232 to 20 mA (passive) (DB-25F with terminal block) 2017P60M: RS-232 to 60 mA (passive) (DB-25M with terminal block) 2017P60F: RS-232 to 60 mA (passive) (DB-25F with terminal block) 2017AM: RS-232 to 20 mA (active) (DB-25M with terminal block) 2017AF: RS-232 to 20 mA (active) (DB-25F with terminal block) 2017XXRJ11: With RJ-11 jack 2017XXRJ45: With RJ-45 jack
Example 2017PM RJ11: Male DB-25, RJ-11 jack
Rack card versions 2017RC11: Dual 20 mA rack card, RJ-11 2017RC45: Dual 20 mA rack card, RJ-45
Note: Other models are available, call for details.
FEATURES & BENEFITS Data rates from 50 bps to 19.2 kbps Range to 4 mi. (6.4 km) on two 24 AWG (0.5 mm)
twisted pair No AC power required; draws necessary power for (passive)
operation from RS-232 interface Optically isolated on line side DB-25 connectors on both ends Two units can work together as optically isolated RS-232
distance extenders
ORDERING INFORMATION 2018M-F: Male RS-232 to female 20 mA 2018F-M: Female RS-232 to male 20 mA
Note: Other models are available, check online at www.patton.com or call for details.

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--INTERFACE & MEDIA CONVERTERS ASYNC/INDUSTRIAL CONVERTERS

Auto-Directional Serial to Parallel Converters Models 2025, 2029, 2035, & 2039

These miniature converter cables automatically select parallel/serial mode

The Models 2025 & 2029 miniature converters represent a

breakthrough in size and performance. They support auto-

directional data conversion, serial data rates to 38.4 kbps,

plus hardware and X-On/X-Off handshaking. Yet they are no

larger than a DB-9 or DB-25 backshell (excluding cable),

and require no AC power or batteries for operation. The Model 2025 plugs directly into an RS-232 device with Model 2025

a DB-25 serial port. The Model 2029 plugs directly into an

EIA-574 (RS-232) device with a DB-9 serial port. Both mod-

els use microprocessor technology to automatically orient

themselves for serial-to-parallel or parallel-to-serial data con-

version. A single LED indicator monitors five modes, including transmit status.

Model 2029

FEATURES & BENEFITS Data rates to 38.4 kbps (Models 2025 or 2029) or 115.2
kbps (Models 2035 or 2039) Integral 6 foot (1.8m) cable Auto-directional data conversion Automatic DCE/DTE mode selection Support for hardware and software X-On/X-Off flow control Data rates to 38,400 bps (Models 2025 and 2029) Data rates to 115.2 bps (Models 2035 and 2039) Link Status LED indicator

SPECIFICATIONS
Data Rate: 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4 kbps selected by external DIP switch (for speeds up to 115.2 kbps (2035 and 2039) Data Format: Asynchronous serial/36-pin parallel

Characters: 7 or 8 data bits, one stop bit Parity: Even, odd, or no parity Cable Length: 6.0 feet (1.8m) Power: No AC power required

ORDERING INFORMATION DB-25 versions 2025: Serial (DB-25 female) to parallel (36-pin male) 2025-25M: Serial (DB-25 female) to parallel (DB-25 male) 2025GCM: Serial (DB-25 male) to parallel (36-pin male) 2025GCM-25M: Serial (DB-25 male) to parallel (DB-25 male)

2035: Serial (DB-25 female) to parallel (36-pin male) 2035-25M: Serial (DB-25 female) to parallel (DB-25 male) 2035GCM-25M: Serial (DB-25 male) to parallel (DB-25 male)

DB-9 versions 2029: Serial (DB-9 female) to parallel (36-pin male) 2029-25M: Serial (DB-9 female) to parallel (DB-25 male) 2039: Serial (DB-9 female) to parallel (36-pin male) 2039-25M: Serial (DB-9 female) to parallel (DB-25 male)
Note: Other models are available, call for details.

Compact Interface Serial to Parallel Converters Models 2026, 2027, 2036, & 2037

These converters automatically sense and select parallel/serial and DCE/DTE modes

These auto-directional parallel to serial converters automati- The 2026 and 2036 have a DB-

Model

cally orient themselves for parallel/serial direction and 25 and a 36-pin connector. The

2026

DTE/DCE orientation. In addition, all units are self-powered, Model 2027 supports serial data

support hardware and X-ON/X-OFF flow control, and can be rates up to 38.4 kbps, while the

configured from external DIP switches.

2037 supports rates up to 115.2

The Model 2026 supports serial data rates up to 38.4 kbps, while the Model 2036 goes all the way up to 115.2 kbps!

kbps. The 2027 and 2037 have DB-
25 connectors at both ends. Model 2027

ORDERING INFORMATION 2026-F: Converter, serial DB-25 female and parallel 36-pin male 2036-M: Converter, serial DB-25 male and parallel 36-pin male 2036-F: Converter, serial DB-25 female and parallel 36-pin male 2027F-F: Converter, serial DB-25 female and parallel DB-25 female

2027F-M: Converter, serial DB-25 female and parallel DB-25 male 2037F-F: Converter, serial DB-25 female and parallel DB-25 female 2037F-M: Converter, serial DB-25 female and parallel DB-25 male

FEATURES & BENEFITS Auto-directional data conversion
Automatically selects parallel-to-serial or serial-toparallel operation
Automatically selects DCE/DTE mode Supports hardware and software X-On/X-Off flow control
Data rates from 300 bps to 38.4 kbps (Models 2026 & 2027) or up to 115.2 kbps (Models 2036 & 2037)
External configuration switches

SPECIFICATIONS
Data Rate (selected by external switches): 2026 & 2027--300, 600, 1200, 2400, 4800, 9600, 19,200, 38,400 bps; 2036 & 2037--up to 115.2 kbps Parity: Even, odd, or no parity with 7 or 8 data bits

Power: No AC power required; uses ultra low power derived from the RS-232 data and control signals
Connectors: Model 2026 & 2036--DB-25 female, 36 pin male or female; Model 2027 & 2037--two DB25 female connectors

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--BALUNS & INTERFACE ADAPTERS CCTV PASSIVE & CATV PASSIVE PASS THROUGH

Industrial Solutions
PRODUCT GUIDE

CCTV Passive Baluns Model 310 Series
Why use expensive and difficult-to-manage coax cabling when you can use inexpensive twisted-pair? The Model 310M CCTV a single unshielded twisted pair for more versatile security Modular Balun allows a sin- and surveillance cabling. Used in pairs, the CCTV Balun elimgle composite CCTV video inates costly and bulky coax cable. signal to be transmitted via

FEATURES & BENEFITS Communicate over existing telephone lines or other twist-
ed pair media
Connect twisted pair using RJ45 or terminal block
Distances up to 2,230 feet (680 meters) over Cat5 cable
No AC or power required and supports bi-directional signal conversion

Application diagram

SPECIFICATIONS
UTP: 24 gauge or lower, twisted pair Impedance: 100 ohm at 1 MHz Max. Capacitance: 20 pf/ft Attenuation: 6.6 dv/1000 feet at 1 MHz BNC: Impedance: 75 ohm at 1 MHz (RG-59) Bandwidth: Video DC to 8 MHz Maximum Input: 1.1 Vp-p

Impedance: 75 to 100 ohm Insertion Loss: Max 2 dB per pair over frequency range from DC to 8 MHz
Return Loss: Greater than 15 dB over the frequency range from DC to 8 MHz
Common mode rejection: Greater than 40 dB at 8 MHz
Active Pins: 8+ 7-

ORDERING INFORMATION 310M: CCTV BNC male to TB/RJ45; wiring 8+,7310F: CCTV BNC female to TB/RJ45; wiring 8+,7311M: CCTV std type balun for indoor BNC male to RJ45 312M: CCTV std type balun for outdoor BNC male to RJ45

I'm Jen, one of Patton's Sales Associates. Call me at +1 301.975.1000 when you want to purchase Patton products or if you have questions about our products. You can also send e-mail to sales@patton.com.

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--BALUNS & INTERFACE ADAPTERS CATV

CCTV Passive Pass-Thru Baluns Model 320 Series

Pass power, PTZ, and video over a single Cat 5 cable.

Patton's CCTV Pass-Thru Balun allows video, 2-wire pan/tilt/zoom (PTZ) control and remote power to be transmitted via one 4-pair Cat5 cable eliminating the need to install multiple cables in the CCTV security and surveil-

lance environment. The pass-thru balun may be used in pairs or in conjunction with standard twisted pair crossconnect devices and other Patton CCTV baluns.

Application diagram

FEATURES & BENEFITS Distances up to 2,230 feet (680 meters) over Cat5 cable

SPECIFICATIONS

Except for the following, specifications are the same for Model 320 and Model 310 Max. Distance: 24 VAC via three pairs with 10% voltage drop at camera 5VA: 519 feet (170 meters) 10VA: 258 feet (85 meters) 20VA: 130 feet (43 meters) 30VA: 86 feet (28 meters) Max Input Voltage: 50V (AC RMS/DC)

Max Current Rating: 4.5A (AC RMS/DC) Active Pins: Model 320: 8+ 7- (video), 1 2 3 4 5 6 (power) Model 321: 8+ 7- (video), 1 2 3 6 (power), 4, 5 (data, PTZ control) Model 322: 8+ 7- (video), 4 5 3 6 (data, speed dome)

ORDERING INFORMATION
320P: CCTV Balun RJ45 Power-thru type Male w/DC power plug, 8+7- (video), 123456 (power)
320J: CCTV Balun RJ45 Power-thru type Male w/DC power Jack, 8+7- (video), 123456 (power)
320: CCTV Balun RJ45 Power-thru type Male w/o DC power Plug and Jack, 8+7- (video), 123456 (power)
321P: CCTV Balun RJ45 Power-thru type Male w/DC power plug, 8+7- (video), 1236 (power), 4,5 (data, PTZ control)
321J: CCTV Balun RJ45 Power-thru type Male w/DC power jack, 8+7- (video),1236 (power), 4, 5 (data, PTZ control)
322: CCTV Balun RJ45 Power-thru type Male w/o DC power Jack, 8+7- (video), 4536 (data, speed dome)

CATV Passive Baluns Model 330 Series

Model 330MP shown

Why use expensive and hard-to-manage coax cables when you can use inexpensive twisted-pair?

Patton's 330 Series CATV Baluns enable one CATV, VHF, and FM video signal to be transmitted via one twisted-pair cable in a

point-to-point connection. The CATV balun saves the cost of installing expensive and bulky coax cable and is a smart, fast way of connecting RF video equipment to TVs, monitors, and other RF equipment.

Application diagram

FEATURES & BENEFITS Communicate over existing telephone lines or other twist-
ed pair media
Connect twisted pair using R-J45 or terminal block
Distances up to 328 feet (528 meters) over Cat5 cable

SPECIFICATIONS
UTP: 24 gauge or lower, twisted pair Impedance: 100 ohm Pins: 7 & 8 F Connector: Impedance: 75 ohm Bandwidth: 5 to 862 MHz Insertion Loss: Less than 3 dB (5 dB max. for CATV 2-27)

Return Loss: More than 18 dB from 10 to 862 MHz
Common mode rejection: More than 20 dV from 40 to 862 MHz
Max. Distance: 197 feet (60 meters) over Cat5; 328 feet (100 meters) with amplifier

ORDERING INFORMATION 330F: F Male to RJ45 Jack, wiring 8+/7330MP: PAL Male to RJ45 Jack, wiring 8+/7331F: F Female to Toolless IDC with cover 331M: F Male to Toolless IDC with cover 331FP: PAL Female to Toolless IDC with cover 331MP: PAL Male to Toolless IDC with cover

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

10/100BASE-TX (CATEGORY-5)
Up to 100 Mbps (PoE 802.3af available)
Protects 8 or 16-port Category-5 interfaces (including RS-422, RS-423, 10/100Base-TX, Token Ring, Fast Ethernet, and ATM) twisted-pair hubs against transients Models 570R & 580R Page 56

Data Line Surge Protectors

Async DB-25 Surge Protectors. . . . . . . . . . . . . . . . . . . 55 Sync DB-25 Surge Protectors. . . . . . . . . . . . . . . . . . . . 55 Sync DB-9 Surge Protector . . . . . . . . . . . . . . . . . . . . . 55 Serial DB-25 Surge Protector (All 25 Leads) . . . . . . . . 55 10/100Base-TX (Cat-5) Secondary Surge Protector . . . . 55 10/100Base-TX (Cat-5) Secondary Multiport Protectors, Hub and Panel

(Rack Mount) Formats . . . . . . . . . . . . . . . . . . . . . . . . 56 Multiport RS-232 & RS-422 Surge Protectors. . . . . . . . 56

Optical Isolators

Asynchronous RS-232 Optical Isolator . . . . . . . . . . . . . .57 RS-422/485 Optical Isolators . . . . . . . . . . . . . . . . . . . .57

DB-25 DB-9

RS-232
These asynchronous surge protectors guard RS-232 data and control signals against harmful transients. Ideal for situations where you have equipment such as multiplexers, repeaters, concentrators, and short-range modems connected to long lengths of cable, they protect against signal noise and surges.
Protect your expensive communications equipment from line-to-line and line-toground transients.
Highly sensitive avalanche-diode circuitry Install quickly and easily Available with DB-9 and DB-25 connections
Models 501 & 509 Page 55

10/100 BASE-TX

Cat 5 Certified

These 10/100Base-TX surge protectors are EIA/TIA TSB-40A Category-5 certified, and can protect your RS-422/423, Token Ring, and ATM equipment too!
Install at equipment locations (570) or wiring closets (580)
Complies with transient immunity standards IEC 801-2, 801-4, & 801-5
PoE 802.3af

Model 570/580 Page 55

ASYNCHRONOUS RS-232
Don't let ground loops disrupt your RS-232 communications! The Model 590 Series of RS-232 optical isolators guard your asynchronous equipment from the hazards of ground looping. Plugging directly into your DTE hardware, the Model 590 Series provides 2500V RMS peak DCE/DTE isolation.
Models 590A and 592 support asynchronous data rates up to 19.2 kbps
Models 5911A and 594 support asynchronous data rates up to 115.2 kbps
2500 VRMS peak isolation
Model 590 Series Page 57

ASYNCHRONOUS RS-422/485
Prevent the early failure of your RS-422/485 devices! The Model 593 series of RS-422/485 optical isolators protects your RS422/485 equipment from the hazards of ground looping. Connect the Model 593 directly to your equipment via a DB-25 or RJ-45 connector, or a terminal block. Supports asynchronous data rates up to 115.2 kbps Installs quickly and easily 2500 VRMS peak isolation
Model 593 Series Page 57

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--SURGE PROTECTION SURGE PROTECTORS

Async DB-25 Surge Protectors Models 500 & 501
Sync DB-25 Surge Protector Model 502
Sync DB-9 Surge Protector Model 509

ORDERING INFORMATION

FEATURES & BENEFITS
Model 500 protects pins 2, 3, 7 and 20 (pin 1 and shell connected to ground)
Model 501 protects pins 2, 3, 4, 5, 6, 7, 8 and 20 (pin 1 and shell connected to ground)

Models 500 & 501 500: Async DB-25 Surge Protector 501: Async DB-25 Surge Protector
Model 502 502: Sync DB-25 Surge Protector

FEATURES & BENEFITS Protects pins 28, 15, 17, 22 & 24 Diverts surge energy to pin 1 and D-shell at both ends

Model 509 509/6: DB-9 Surge Protector (for RS-422/485) 509/25: DB-9 Surge Protector (for RS-232)
Model 509 503S: RS-232 Serial DB-25 Surge Protector 503S/6: RS-422/485 Serial DB-25 Surge Protector

FEATURES & BENEFITS Two clamping voltages: 7.5 V (RS-422) or 18V (EIA-
574/RS-232)
Combined surge-handling of 5,400 watts
Protects all 9 pins

Model 570, 580, & 570-POE, 580-POE 570: 10/100Base-T (CAT-5) Protector Point of Use (8-Wire) 570-POE: 10/100Base-T PoE Protector Point of Use 580: 10/100Base-T (CAT-5) Protector Barrier (8-Wire) 580-POE: 10/100Base-T PoE Protector Barrier

Serial DB-25 Surge Protector (All 25 Leads) Model 503S

This universal surge protector guards any RS-232 system (synchronous or asynchronous) against data loss and hardware damage caused by

data line transients. There are many sources of such transients--lighting strikes, fluorescent lights, elevator motors, even UPSs. AC protection alone is not enough! The Model 503S diverts harmful data line surges to chassis ground (through either D-shell) before they reach your hardware.

FEATURES & BENEFITS Protects all 25 serial pins on the DB-25 connector
Combined surge handling capacity of 36,000 watts
Diverts surges safely to chassis ground through Dshell connectors

10/100Base-TX (Cat-5) Secondary Surge Protector Models 570, 580, & 570-POE, 580-POE

Our Cat-5 protector works at speeds up to 100 Mbps

These 10/100Base-TX surge protectors are EIA/TIA TSB-40A Category-5 certified, and can protect your RS-422/423, Token Ring, and ATM equipment too! With a NEXT spec of -43dB (worst pair), you can rest assured that these units will protect your 10/100Base-TX, RS-422 or 100VG-AnyLan data lines without hindering critical network performance. The Model

570 is designed for use at the sensitive equipment port, while the Model 580 protects barriers (such as wiring closets).

FEATURES & BENEFITS EIA/TIA TSB-40A Category-5 certified
Models for use at the equipment (570) or barriers/wiring closets (580)
Near-end cross-talk (NEXT) better than -43 db for transparent protection
Complies with transient immunity standards IEC 801-2, 801-4, & 801-5
Response time of 0.1 s

SPECIFICATIONS

802.3af compliant models available

Environment: Category-5 interfaces that use the RJ-45 connector, including RS-422/423, 10Base-T, Token Ring, 100Base-TX & ATM
Connectors: RJ-45 Female Response Time: Clamped to 13 V after 0.1 µs
Characteristic Impedance: 100 ohm

Surge Clamp Voltage: Model 570--13 V max with 1 KV Input; Model 580--15 V max with 2 KV Input
NEXT Loss: 570: worst pair better than -46 dB at 100 MHz; 580: worst pair better than -43 dB at 100 MHz
Surge Rating: IEC 801.5 Standard Level

DC Clamp Voltage: Common Mode to Gnd, each line 7.5 V @ 50 mA; Differential mode, per pair 8.1 V @ 50 mA
Insertion Loss: Less than 0.4 dB at 100 MHz (including connector)
Return Loss: Better than 14 dB Group Delay: None, 1100 MHz Series Resistance: Less than 400 milli-ohms

Grounding: External ground strap provides separate unit- to chassis-ground
Dimensions: 2.25 x 1.69 x 0.75 in (5.72 x 4.29 x 1.91 cm)
570 & 580 Common mode (to ground) (each line): 7.7 V @ 10mA (pulse)

Differential mode (per pair): 8.6 V @ 10 mA (pulse)
570-POE & 580-POE Pairs (1, 2) & (3, 6)
Common mode (to ground) (each line): 7.7 V at 10mA (pulse) Differential mode (per pair): 8.6 V at 10 mA (pulse)

Pairs (4, 5) & (7, 8) Common mode clamping voltage is 69 V at 1 mA (pulse transient) and Differential mode clamping voltage is 70 V at 1 mA (pulse transient).

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--SURGE PROTECTION SURGE PROTECTORS

Industrial Solutions
PRODUCT GUIDE

10/100Base-TX (Cat-5) Secondary Multiport Protectors, Hub and Panel (Rack Mount) Formats Models 57X & 58X
Our Cat-5 protector works at speeds up to 100 Mbps.

FEATURES & BENEFITS Provides 4, 6, 8 or 16 ports of protection against transients Guards twisted-pair interfaces at speeds up to 100 Mbps EIA/TIA TSB-40A Category-5 Certified Models for Point-of-Use (57X) or Barriers/Wiring
Closets (58X)

The Model 57X and 58X Series Category-5 hub protectors are available in 4, 6 or 8-port standalone versions, as well as 8 or 16-port rack mount panels. All Model 57X and 58X units are EIA/TIA TSB-40A Category-5 certified, and divert harmful data line transients to chassis ground through a single braided metal strap. This approach reduces the number of ground connections required. Specifications like near-end cross-talk

(NEXT) of better than -43 dB at 100Mhz, as well as insertion loss of less than 0.4 dB, insure transparent operation.

SPECIFICATIONS

Connectors: RJ-45 Female Response Time: Less than 5 ns Characteristic Impedance: 100 ohm
NEXT Loss: Better than -43 dB at 100 MHz
Surge Clamp Voltage: Model 57X--13 V max with 1 kV Input; Model 58X--15 V max with 2 kV Input
Surge Rating: IEC 801.5 Standard Level

DC Clamp Voltage: Common Mode to Gnd, each line 7.5 V @ 50 mA; Differential mode, per pair 8.1 V @ 50 mA
Return Loss: Better than 14 dB Insertion Loss: Less than 0.4 dB (including connector) at all frequencies
Series Resistance: Less than 400 milli-ohms
Grounding: External ground strap through mounting screws

ORDERING INFORMATION 574: 4-Port, 10/100Base-TX (CAT-5) Hub Protector Point for Use 576: 6-Port, 10/100Base-TX (CAT-5) Hub Protector Point for Use 578: 8-Port, 10/100Base-TX (CAT-5) Hub Protector Point for Use 570R8: 8-Port 10/100Base-TX (CAT-5) Panel Protector Point for Use

570R16: 16-Port 10/100Base-TX (CAT-5) Panel Protector Point for Use
584: 4-Port 10/100Base-TX (CAT-5) Hub Protector for Wiring Closets
586: 6-Port 10/100Base-TX (CAT-5) Hub Protector for Wiring Closets

588: 8-Port 10/100Base-TX (CAT-5) Hub Protector for Wiring Closets
580R8: 8-Port 10/100Base-TX (CAT-5) Panel Protector for Wiring Closets
580R16: 16-Port 10/100Base-TX (CAT-5) Panel Protector for Wiring Closets

Multiport RS-232 & RS-422 Surge Protectors Model 51X Series

The Model 51X Series is a convenient way to provide data line surge protection for hosts, terminal servers, or other multiport devices. Guarding either RS-232 or RS-422/485 equipment, the Model 51X Series houses 4, 6, 8 or 12 surge protectors in a high density array. A choice of two different clamping voltages11 volts for RS-422/485 devices or 27 volts for RS232 devicesassures you of an unimpeded data flow.

Matching RJ-45 input/output ports on the front and rear panels allow the Model 51X Series to connect conveniently in-line with each port on your device. All versions of the Model 51X Series support data rates up to 230 kbps. Harmful data line transients are intercepted before they reach equipment ports and are diverted safely to chassis ground. Employing a solid state hybrid circuit, the Model 51X Series is able to handle repeated surges up to 1.5 kWatts. One 6-inch (15.2 cm) patch cable is included for each port on the unit.

FEATURES & BENEFITS Four Port Densities Available: 4, 6, 8 or 12 Modular Ports
per Enclosure
Two Clamping Voltages: 11 Volts (RS-422/485) or 27 Volts (RS-232)
Data Rates up to 230 kbps
1.5 kW of Surge Handling Capability
Surge Energy Diverted to Ground through Braided Metal Strap

Typical application
Model 514

ORDERING INFORMATION RS-232 Surge Protector 514/25: 4-Port Modular 516/25: 6-Port Modular 518/25: 8-Port Modular 513/25: 12-Port Modular

RS-422/485 Surge Protector 514/6: 4-Port Modular 516/6: 6-Port Modular 518/6: 8-Port Modular 513/6: 12-Port Modular

visit us online
www.patton.com

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--SURGE PROTECTION OPTICAL ISOLATORS

Asynchronous RS-232 Optical Isolators Model 590 Series

Don't let ground loops disrupt your RS-232 communications!

The Model 590 Series of RS-232 optical isolators guard your asynchronous equipment from the hazards of ground looping. Plugging directly into your DTE hardware, the Model 590 Series provides 2500V RMS peak DCE/DTE isolation. Both the Model 590A (19.2 kbps max) and Model 591A (115.2 kbps max) isolate 4 lines on the RS-232 interfacetwo of

which are selectable by internal jumpers. The Model 592 (19.2 kbps max) and Model 594 (115.2 kbps max) isolate 7 pre-wired lines on the RS-232 interface.

FEATURES & BENEFITS 2500V RMS peak isolation
Models 590A and 592 support async data rates to 19.2 kbps
Models 591A and 594 support async data rates to 115.2 kbps

SPECIFICATIONS
Transmission Format: Asynchronous, full or half duplex Interface Standard: EIA RS-232E Connectors: DB-25 female on DCE side (direct connection to DTE equipment); DB-25 male on DTE side (connects by cable to DCE equipment)

Data Rates: Model 590A/592--0 to 19.2 kbps; Model 591A/594--0 to 115.2 kbps
Lines Isolated: Model 590A/591A--TD (2), RD (3), DTR (20) or RTS (4); CD (8), DSR (6) or CTS (5). Model 592/594--TD (2), RD (3), RTS (4), CTS (5), DSR (6), CD (8) and DTR (20).

Power Supply: Model 590A/591A--RS-232 Interface powered, or user-supplied 12V DC input on pin 9 of the DCE interface (45mA); Model 592/594--External AC transformer
Isolation: 2500V RMS peak isolation Dimensions: 3.8 x 2.1 x 0.79 in. (9.7 x 5.3 x 2.0 cm)
Op. Temp.: 32122°F (050°C)

Altitude: 010,000 feet (03,078 m) Humidity: Up to 95% non-condensing

ORDERING INFORMATION
RS-232 Optical Isolator (DB-25M to DB-25F) 590AF: 19.2 kbps, 4 Lines Isolated 591AF: 115.2 kbps, 4 Lines Isolated 592/25F: 19.2 kbps, 7 Lines Isolated 120 V 594/25F: 115.2 kbps, 7 Lines Isolated,120 V
230 VAC version also available, call for details.

RS-422/485 Optical Isolators Model 593 Series
Prevent the early failure of your RS-422/485 devices! The Model 593 series of RS-422/485 optical isolators protects your RS-422/485 equipment from the hazards of ground looping. Connect the Model 593 directly to your equipment via a DB-25 or RJ-45 connector, or a terminal block. The Model 593 supports data rates up to 115.2 kbps.

SPECIFICATIONS

Transmission Format: Asynchronous, full- or half-duplex
Interface standard: RS-422/485, or terminal block
Data rates: Up to 115.2 kbps

Power Supply: AC external power supply Isolation: 2500 Vrms peak isolation Op. Temp.: 32140°F (060°C) Altitude: 010,000 ft (3,048 m)

Dimensions: 593/45 & 593/TB: 3.8L x 2.1W x 0.79H in. (9.7L x 5.3W x 2.0H cm)

FEATURES & BENEFITS 2500 Vrms peak isolation Supports asynchronous data rates up to 115.2 kbps

593/25: 4.1L x 2.1W x 0.79H in. (10.4L x 5.3W x 2.0H cm)
Humidity: 595% non-condensing

ORDERING INFORMATION
RS-422/485 Optical Isolator 593/45: RJ-45F to RJ-45F, 115.2 kbps 4 lines isolated 593/25F: DB-25F to DB-25F, 115.2 kbps 4 lines isolated 593/TB:Terminal block to terminal block, 115.2 kbps, 4 lines isolated

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

visit us online
www.patton.com

CONNECTIVITY--TESTERS TESTERS & ADAPTERS

Industrial Solutions
PRODUCT GUIDE

DB-25 & DB-9 Data Taps Models 3 & 3/9
Monitor data line activity or connect 2 devices to one RS-232 port! Models 3 and 3/9 provide a simple, inexpensive way to "tap" into a data line so you can use a scope or monitor to see what is occurring without interrupting the flow of data. Three DB-25 (Model 3) or DB-9 (Model 3/9) connectors--wired straight through--make tapping into existing RS-232 lines simple and neat. These handy little devices can also be used anywhere you would use a "Y" cable, such as connecting 2 terminals in parallel to one port. Please specify gender: MF-M, MF-F, MM-M, MM-F, FF-M, or FF-F).

FEATURES & BENEFITS All pins wired straight through to all three connectors
A great way to monitor data line activity or connect two devices to one RS-232 port
Available in all gender combinations

Model 3

Model 3/9

ORDERING INFORMATION

Model 3 3XY-Z: DB-25 Data Tap (specify genders)

Model 3/9 3/9XY-Z: DB-9 Data Tap (specify genders)

Model 3/9HDX 3/9HDXY-Z: DB-9 Data Tap (Half-Duplex) (specify genders)

Example:

3/9 FM-F

X= (M) Male or (F) Female

Y= (M) Male or (F) Female

Z= (M) Male or (F) Female

DB-25 Cube Tap Model 4 This cube tap takes the data top one step further. As you might imagine, the Model 4 has all 25 pins of all four connectors wired straight through. It's like having a single data tap with DB-25 to Modular Adapters Models 11 & 12
DB-9 & DB-15 Modular Adapters Models 15 & 16
visit us online
www.patton.com

up to four different gender combinations. Or it's like having a "universal gender changer." You can even use it to create a DB-25 "X" cable.

FEATURES & BENEFITS
Data junction box with all 25 pins connected straight through on all four connectors
Available with all possible gender combinations (normally supplied with two male and two female connectors)

FEATURES & BENEFITS DB-25 (Male or Female) to RJ-11/RJ-12, RJ-45, or Dual
RJ-11/RJ-12 Available as Solder Kits, Pushpin Kits Complete with Case, Connectors, Captive Screws and
Saddle Washers
FEATURES & BENEFITS High Density 15 Pin Connector (Male or Female) to RJ-
11/RJ-12 or RJ-45 Available as Solder Kits, Pushpin Kits ORDERING INFORMATION
Model 15, DB-15 to RJ-11/12 or RJ-45 1511KPM: DB-15 Male, pushpin kit 1511KPF: DB-15 Female, pushpin kit 1545KPM: DB-15 Male, pushpin kit 1545KPF: DB-15 Female, pushpin kit

ORDERING INFORMATION Model 11, DB-25 to RJ-11/12 11KS M: DB-25 Male, solder kit 11KS F: DB-25 Female, solder kit 11KP M: DB-25 Male, pushpin kit 11KP F: DB-25 Female, pushpin kit Model 12, DB-25 to RJ-45 12KS M: DB-25 Male, solder kit 12KS F: DB-25 Female, solder kit 12KP M: DB-25 Male, pushpin kit 12KP F: DB-25 Female, pushpin kit
Model 16, DB-9 to RJ-11/12 or RJ-45 1611KPM: DB-9 Male, pushpin kit 1611KPF: DB-9 Female, pushpin kit 1645KPM: DB-9 Male, pushpin kit 1645KPF: DB-9 Female, pushpin kit

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

Industrial Solutions
PRODUCT GUIDE

CONNECTIVITY--TESTERS TESTERS & ADAPTERS

Async Null Modem Adapters Models 6A, 6B, & 6C
Data Terminals don't want to "talk" to each other! Neither do Personal Computers or serial printers! They will only talk to modems (DCEs), not to each other (DTEs). But these devices can be "fooled" into thinking they are connected to "modems" when they are not. Our null modem adapters (also called async modem eliminators or cross over cables) will do the job.

FEATURES & BENEFITS
Model 6A--No Handshake: This is the most frequently used arrangement
Model 6B--Standard Handshake: This connection allows for the most common hardware flow control
Model 6C--Full Handshake: This model is for full query and response between two RS-232C devices

Model 6A No Handshake

Model 6B Standard Handshake

Model 6C Full Handshake

Loopback Adapter Model 6L
DB-25 Micro Breakout Box Model 9

FEATURES & BENEFITS Loops back DB-25 Pins 2 & 3, 4 & 5, 6, 8 & 20 on
both ends
The easy way to produce a "local echo" for testing RS-232 devices
One male, one female connector

ORDERING INFORMATION
Model 6, Null Modem Adapter 6AXX: No Handshake 6BXX: Standard Handshake 6CXX: Full Handshake
XX = Specify genders.

FEATURES & BENEFITS All 25 Pins From Both DB-25 Connectors are Accessible Gold Plated Sockets Three Sets of Sockets to Make Jumpering Easy 25 Jumpers Supplied (19 AWG, soild) One Male & One Female DB-25 Connector

ORDERING INFORMATION
Model 9, Breakout Box 9MF: DB-25 Micro Breakout Box

DB-25 PockeTesterTM Model 50
DB-9 PockeTesterTM Model 51

FEATURES & BENEFITS Monitors Async RS-232 Pins 2, 3, 4, 5, 6, 8, and 20 All 25 Pins are Wired Straight Through 1 Male & 1 Female DB-25 Connector Interface Powered--No AC Power or Batteries Needed Data bias can be inferred from intensity of the colors
FEATURES & BENEFITS Seven LEDs Monitor RS-232 Signals All 9 Pins are Wired Straight Through Data Bias can be Inferred from the Intensity of the Colors 1 Male & 1 Female DB-9 Connector

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

ORDERING INFORMATION Model 50 50MF: DB-25 PockeTester
ORDERING INFORMATION Model 51 51: DB-9 PockeTesterTM
visit us online
www.patton.com

Regional Contacts

Corporate Headquarters Patton Electronics Company 7622 Rickenbacker Drive Gaithersburg, Maryland, 20879 USA tel: +1 301 975 1000 · fax: +1 301 869 9293 web: www.patton.com · e-mail: sales@patton.com

USA & Canada tel: +1 301 975 1000 · fax: +1 301 869 9293 e-mail: sales@patton.com
Australia/New Zealand tel: +61 2 9620 8164 · fax: +1 413 803 6235 e-mail: australia@patton.com

Western Europe/United Kingdom

tel: +41 31 985 25 25 · fax: +41 31 985 25 26

e-mail: europe@patton.com

EMEA Patton-Inalp Networks AG Meriedweg 7 CH-3172 Niederwangen, Switzerland

Central Europe/CIS tel: +1 241 912 1218 · eFax: +1 240 597 8442 e-mail: ce@patton.com

tel: +41 31 985 25 25 · Fax: +41 31 985 25 26

web: www.patton-inalp.com · e-mail: europe@patton.com

MENA tel: +961 4 712 691 or 2 · fax: +1 413 832 9194 e-mail: mena@patton.com
Asia/Pacific tel: +84 9090 21213 · fax: +1 208 728 1210 e-mail: asia@patton.com
Latin America/Caribbean tel: +1 240 912 1219 · fax: +1 301 869 9293 e-mail: americas@patton.com

1,000 Network Access & Connectivity Products in Our Dual Catalogs!

The Network Access Catalog ("Blue Book") offers hundreds of products including VoIP/ToIP devices, IP routers, Ethernet extenders, DSL CPE, DACS, remote access servers, NTUs, CSU/DSUs and IADs, Last-Mile access, Multi-Service access, device servers, and more!

The Connectivity Catalog ("Red Book") contains hundreds of telecom and datacom products. Inside its pages you'll find line drivers, baluns, short range modems, surge protectors, multiplexers, device servers, and more!

To get your free catalogs, e-mail sales@patton.com or visit:

Presorted Standard U.S. Postage PAID Rockville, MD
Permit No. 5130

07MINDSOL-PG1

QuarkXPress: pictwpstops filter 1.0 3-Heights™ PDF Optimization Shell 6.3.1.5 (http://www -tools.com)