Oliver C/E King Assembly Instructions
Brand: Living Spaces
Hardware Included
| Identifier | Description | Size/Type | Quantity |
|---|---|---|---|
| A | Bolt | Φ6*20MM | 8PCS |
| D | Washer | Φ6 MM | 16PCS |
| F | Bed Feet | N/A | 2PCS |
| G | Metal Slat | N/A | 4PCS |
| I | Wrench | N/A | 1PC |
| J | Center Support Leg | N/A | 8PCS |
| R | Bolt | Φ6*25MM | 2PCS |
| T | Bolt | Φ8*60MM | 8PCS |
Note: Bolts (B) and Washers (E) are factory installed.
Assembly Steps
Step 1
Retrieve bed feet (F) from the carton packed in the side rails. Attach bed feet (F) to the footboard using Wrench (I) and Bolt (R).
Diagram Description: Shows the footboard and bed feet. An arrow indicates attaching the bed feet (F) to the footboard using the wrench (I) and bolt (R).
Step 2
Attach side rails to the headboard using Wrench (I), Bolt (B), and Washer (E) (factory installed). Attach side rails to the footboard using Wrench (I), Bolt (B), and Washer (E) (factory installed).
Diagram Description: Shows the headboard and footboard being connected by side rails. The diagram illustrates the attachment points for the side rails to both the headboard and footboard using the pre-installed bolts (B) and washers (E), and the wrench (I).
Step 3
Attach steel center support legs (J) to the metal slat (G) using Wrench (I), Bolt (T), and Washer (D).
Diagram Description: Illustrates the attachment of center support legs (J) to the metal slat (G). The diagram shows the orientation of the legs with an "UP" indicator and the use of wrench (I), bolt (T), and washer (D) for securing them.
Step 4
Move the bed to its final position in the bedroom.
Diagram Description: A simple illustration of the assembled bed frame in a bedroom setting, indicating the action of moving the bed.
Step 5
Attach the steel slat support system to the full-length steel side support cleats (flat side facing up). Verify that the metal slats are installed properly into the support cleats and that the center support legs are perpendicular to the floor for full support.
Diagram Description: Shows the steel slat support system being placed onto the side support cleats of the bed frame. The diagram highlights the correct orientation (flat side up) and the importance of the slats being perpendicular to the floor.
