ELECOM M-DPT1MR Trackball Mouse

Product Overview

This document provides instructions and specifications for the ELECOM M-DPT1MR Trackball Mouse, a versatile input device offering wired, 2.4 GHz wireless, and Bluetooth connectivity options.

Names of Parts

Trackball Main Unit:

• Left button
• Right button
• Tilt wheel
• "Back" button (Operates the "Back" button on the Web browser)
• "Forward" button (Operates the "Forward" button on the Web browser)
• Function button 1
• Function button 2
• Function button 3 (Functions can be assigned using Elecom Mouse Assistant software)
• Trackball
• LED lamp (Indicates pairing status ?/?, power status, and low battery)
• USB [A] connector (for wired connection)
• Connection mode selection switch (2.4 GHz wireless / Bluetooth)
• Pointer speed change switch (500/1000/1500 dpi)
• Optical sensor (reverse side of ball)
• Ball removal hole (for maintenance)
• Power mode selection switch (Power OFF / Low energy mode / High speed mode)
• Pairing button
• Battery cover
• Battery storage section
• Receiver unit storage section

Receiver Unit:

• USB connector (male)

Setup and Connection

1. Insert Battery

Remove the battery cover. Insert one AA battery (alkaline, manganese, or Ni-MH rechargeable) according to instructions on the bottom surface, ensuring correct polarity (+/-). Re-attach the cover.

2. Turn the Power ON

Slide the power mode selection switch to H (High speed mode) or L (Low energy mode). The LED lamp lights up red briefly. For wired connection, the mouse operates without batteries and power mode selection is not applicable.

• High speed mode: Offers enhanced tracking performance for fast movements, but reduces battery life.
• Low energy mode: Optimizes for longer battery life.

Note: When remaining battery is low, the LED blinks red.

3. Connecting to a PC

3.1. Wired Connection

Connect the attached USB cable to the USB microB port on the trackball. Connect the USB connector to the PC's USB port. The driver installs automatically. Note that 2.4 GHz wireless and Bluetooth connections cannot be used simultaneously when connected by cable.

Caution: Ensure correct connector orientation. Forcible insertion may cause damage or injury. Do not touch the USB connector terminals.

3.2. 2.4 GHz Wireless Connection

Start the PC. Change the connection mode selection switch to "2.4 GHz wireless". Insert the receiver unit into a USB port on the PC. The driver installs automatically.

Note: The trackball enters energy-saving mode after a period of inactivity to conserve battery. Moving the ball restores it. Operation may be unstable for 2-3 seconds after waking up from energy-saving mode.

Caution: Ensure correct receiver unit connector orientation. Forcible insertion may cause damage or injury. Do not touch the USB connector terminals.

3.3. Bluetooth Connection

Change the connection mode selection switch to "Bluetooth". The LED indicator will be blue ?. Pairing methods may vary by PC.

For Windows 10:

1. Click the "Start" button on the lower left of the screen, and click the "Settings" icon ⚙️.
2. Click "Devices" > "Bluetooth & other devices".
3. Click "Add Bluetooth or other device" ▶️.
4. Click "Bluetooth".
5. Hold the pairing button on the trackball for 2-3 seconds. The LED lamp blinks red ?.
6. Select "DEFT Pro Trackball" from the list of devices.
7. Click "Connect" and then "Done".

For Windows 7:

Note: Refer to your PC's manual or Bluetooth adapter manual. Pairing requires a Bluetooth 4.0 compatible adapter.

For macOS High Sierra (10.13):

1. From the Apple menu, click "System Preferences..." ⚙️.
2. Click "Bluetooth".
3. Hold the pairing button on the trackball for 2-3 seconds. The LED lamp blinks red ?.
4. Select "DEFT Pro Trackball" from the list of devices.
5. Click "Connect".

Note: Requires Bluetooth 4.0 or later installed on the Macintosh computer.

How to Clean the Trackball

Use a finger or pen to push the ball out from the reverse side through the ball removal hole. Use a cotton bud or similar to remove dust accumulated on the three contact surfaces of the ball and around the optical sensor. Be careful not to damage the sensor.

Specifications

Safety Precautions

Note: The following is a summary of safety precautions. Refer to the original document for full details.

Prohibited Actions ?

• Do not drop or bump the product.
• Do not attempt to disassemble, modify, or repair.
• Do not throw into fire.
• Do not insert/remove receiver with wet hands.
• Do not modify or forcibly bend the product.

Mandatory Actions ✅

• If foreign objects (water, metal chips) enter, stop use, remove receiver, remove batteries.
• If abnormal behavior (heat, smoke, smell) occurs, stop use, shut down PC, remove receiver and batteries, then contact dealer.
• If product is damaged, stop use, remove receiver and batteries, then contact dealer.
• Store receiver out of reach of children.
• When disposing, follow local regulations.

Situations Requiring Attention ⚠️

• Do not place in environments exposed to direct sunlight, high heat, moisture, vibration, magnetic fields, or dust.
• Product is not waterproof; avoid liquids.
• Use only with PCs and game systems.
• Remove receiver from PC if not used for one month or more.

Batteries

• Use AA alkaline, manganese, or Ni-MH rechargeable batteries.
• Remove batteries for long periods of non-use to prevent leaks/malfunction.
• Do not mix battery types or old/new batteries.

Cleaning

• Wipe with a soft, dry cloth.
• Avoid volatile liquids (thinner, benzene, alcohol) as they may affect material quality and color.

Wireless Precautions

• This product uses the 2.4 GHz band and GFSK method. Interference distance is approx. 10m.
• Check for other wireless stations nearby. If interference occurs, change location or stop use.
• WARNING: Do not use in equipment where malfunction could cause serious effects. May be affected by other 2.4 GHz devices or mobile phones. Do not use in hospitals or where radio waves are prohibited. May affect electronic/medical devices (e.g., pacemakers).
• Aircraft Warning: Use of wireless mice is prohibited on aircraft. Turn off power before boarding and do not use onboard.

Limitation of Liability

ELECOM Co., Ltd. is not liable for lost profits, special, consequential, indirect, or punitive damages arising from product use. ELECOM Co., Ltd. is not liable for data loss or other problems with connected devices.

Compliance and Certifications

This product complies with FCC Part 15 rules. For details, see the original document.

FCC ID: YWO-M-DPT1MR, YWO-ELECOM10

RoHS Compliance: Information available at www.elecom.co.jp/global/certification/

IMDA Standards: Complies with IMDA standards (DA106058, CCAJ18LP1160T5, CCAJ18LP1150T2)

European Authorized Representative: VISHTEC ltd

WEEE Disposal: Do not dispose of as household waste. Treat separately. Consult retailer or local office for collection/recycling.

Global Support

For support outside Japan, contact the local retailer. ELECOM Co., Ltd. (Japan) does not provide customer support for purchases or usage outside of Japan.

Download "ELECOM Mouse Assistant" from the ELECOM website for button assignment and high-speed scrolling functions.

Manufacturer: ELECOM CO., LTD.

Website: www.elecom.co.jp/global/

Product URLs:

• Windows: https://www.elecom.co.jp/r/132.html
• Mac: https://www.elecom.co.jp/r/133.html