Instruction Manuals – Canisteo Blinds
Zigbee Amazon Alexa Getting Started INS-109-C005 A-05 June 2024 TABLE OF CONTENTS 1. Add Shades to Alexa.........................................1 2. Add Shades to SmartThings..............................2 3. Enter Pairing Mode...........................................4 4. Invert Speaker Control Direction.......................8 Add Shades to Alexa IMPORTANT: Smart speaker operations can only be initiated once all blinds are configured with their upper and lower limits and are controllable via the remote. Echo 4th Generation; Echo Plus; and Echo Show 10 (all models except 1st Generation); Echo Studio have built-in smart home hubs that seamlessly connect and control Zigbee smart devices. After a customer sets up the Zigbee-enabled Echo, they can connect their devices by saying, "Alexa, discover my devices." In response, the Echo discovers and sets up the devices, and then makes them available in the Alexa app. 1. To begin, you need an active Amazon account. Download the Alexa app onto your smartphone or tablet, log in, and then follow the provided instructions to register your Amazon Alexa device. 2. Say to Alexa,"Discover my device". 3. Put the Shade into Pairing Mode. 4. The motor will jog twice and the green led flash for 3 times indicats pairingwith the Alexa succeed. 1 Add Shades to SmartThings Please follow the steps below to directly connect our Zigbee shades with the above-mentioned hubs. 1. To begin, you need an active SmartThings account. Download the SmartThings app onto your smartphone, log in, and then follow the provided instructions to register your SmartThings device. 2. Put the shade into pairing mode. 3. Add shade to SmartThings. 4. The motor will jog twice and the green led flash 3 times indicating pairing with SmartThings succeed. 2 Add shades to SmartThings STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 Put the shade into pairing mode. 3 Enter Pairing Mode Instructions for: Roller Shade, Zebra Shade, Woven Wood Shade, Dual Shade,Outdoor Shade. Method One: Press and hold the P1 button on the motor head for 6 seconds until themotor jogs twice, then release the button. When the red LED light is on, itindicates that you have entered the pairing mode. The red light stays on aer releasing the buon. pro Method two: Remove the rear battery cover of the remote, then sequentially press the left P button (1 jog), UP (1 jog), and P (1 jog). When the red LED light is on, it indicates that you have entered the pairing mode. SETTING (P) UP SETTING (P) Note: the motor jogs once Note: the motor jogs once Note: the motor jogs once The red light stays on aer releasing the buon. Note: Please ensure that the displayed channel on the remote corresponds to the shade you intend to adjust. When pressing the 'up' button, the 5-channel remote should not display all 5 indicators lit upand the 15-channel remote should not show as 0. 4 Enter Pairing Mode Instructions specific to Hazel Cellular Shades. Method One: Press and hold the P1 button on the motor head for 6 seconds until the motor jogs twice, then release the button. After a brief moment, the motor will jog once more, indicating that you have successfully entered the pairing mode. Aer releasing the P buon, the motor will jog once more. Method two: Remove the remote's rear battery cover, press the left P button (1 jog).UP(1 jog), and P(1 jog). A subsequent jog indicates entry into pairing mode. SETTING (P) UP SETTING (P) Acvate network pairing mode Note: the motor jogs once Note: the motor jogs once Note: Motor will jog twice with a brief pause. Note: Please ensure that the displayed channel on the remote corresponds to the shade you intend to adjust. When pressing the 'up' button, the 5-channel remote should not display all 5 indicators lit upand the 15-channel remote should not show as 0. 5 Enter Pairing Mode · Method one: Press and hold the P1 button on the motor head for 6 seconds. Release the button once the motor jogs twice. If the red LED light flashes three times, it indicates that the motor has entered pairing mode. Acvate network pairing mode · Method two: After removing the rear battery cover of the remote, sequentially press the left P button (motor will jog once), followed by UP (motor will jog again), and then press P once more (resulting in another jog). If the red LED light flashes three times, it indicates that you have entered pairing mode. SETTING (P) UP SETTING (P) Note: the motor jogs once Note: the motor jogs once Note: the motor jogs once The red led light on the motor head flashes 3 mes Note: Please ensure that the displayed channel on the remote corresponds to the shade you intend to adjust. When pressing the 'up' button, the 5-channel remote should not display all 5 indicators lit upand the 15-channel remote should not show as 0. 6 Enter Pairing Mode · Method one: Press and hold the P1 button on the motor head for 6 seconds until the motor flashes twice then release the button. When the red led light is on indicates that you entered the pairing mode. Release the buon, the red LED light is on · Method two: remove the rear battery cover of the remote, Press the left P button (1 flash and 1 beep), UP (1 flash and 1 beep), and P (1 flash and 1 beep), When the red led light is on indicates that you entered the pairing mode. SETTING (P) UP SETTING (P) Note: 1 flash and 1 beep Note: 1 flash and Note: 1 flash and 1 beep 1 beep Red led light on Note: Please ensure that the displayed channel on the remote corresponds to the shade you intend to adjust. When pressing the 'up' button, the 5-channel remote should not display all 5 indicators lit upand the 15-channel remote should not show as 0. 7 Invert Speaker Control Direction Reverse the motor direction if needed. * The buttons are active for an interval of up to 10 seconds. If there is no operation within this 10-second window, the remote will exit the current setting mode. Press and hold the UP and DOWN buttons for 5S, the motor will jog once. Press and Hold UP + DOWN (5sec) Note: the motor will jog once Remove the rear battery cover of the remote and press the left P button. The motor will jog once, indicating that the direction controlled by the speaker or app for the shade movement has been switched. SETTING (P) Note: the motor will jog once 8 +1 877-933-3671 support@weffortshades.com https://www.weffortshades.comAdobe PDF library 16.03