MILESEEY TR10 Handheld Infrared Thermal Imager

About the Product

Thank you for purchasing the Mileseey TR10 handheld infrared thermal imager. This device is designed for efficient maintenance and inspection, offering precise and user-friendly temperature detection. Please read this manual carefully to ensure optimal use and understanding of the device's functions.

Key Features of the TR10

• 2.8" Color LCD Display: Large display area for easy identification and analysis of fault zones.
• Adjustable Emissivity: Customizable settings to increase detection accuracy for various materials.
• Image Capture and Storage: Captures and stores up to 30,000 images with temperature data on 8GB internal memory.
• Convenient Data Transfer: USB connection for quick image export to a PC.
• Integrated Lithium Battery: Features a built-in battery and Type-C charging interface.
• Automatic Hot and Cold Tracking: Automatically identifies and targets the highest and lowest temperature points.
• Crosshair Trajectories: Aids in easily targeting measurement locations.
• Customizable Temperature Alarms: Set individual high and low temperature alarms for critical area focus.
• Wide Temperature Measurement Range: Accurately measures temperatures up to 550°C, suitable for various industrial applications.
• Portable and User-Friendly Design: Practical solution for maintenance and inspection professionals.

Safety Instructions

To ensure accurate measurements and your safety, use this product strictly according to the instructions in this manual. Failure to comply may result in damage not covered by warranty service.

• Clean the exterior with a damp cloth or mild soap solution. Avoid abrasive detergents, isopropyl alcohol, or solvents on the casing, lenses, or windows.
• Do not use in flammable, explosive, high-steam, high-humidity, or corrosive environments.
• Immediately stop using the product if it is damaged, dropped, or otherwise compromised to avoid inaccurate measurements and safety hazards.
• Set the correct emissivity for the target material to obtain accurate temperature data.
• Allow the device to warm up for 2 minutes before use if it has not been used for a long time to ensure measurement accuracy, as the device may heat up during operation.

Device Layout

Familiarize yourself with the components of the TR10:

• 1. USB-C Charging Port
• 2. LCD Screen
• 3. Image Memory Recording
• 4. Navigation Buttons (Up/Down/Left/Right)
• 5. Power/Return Button (Long press for On/Off, short press to return)
• 6. Settings Button (Short press to enter settings menu)
• 7. Thermal Imaging Camera
• 8. Image Capture Button (Short press to capture and save images)

On-Screen Icons

Understand the various icons displayed on the screen:

• 1. Battery Status
• 2. Center Temperature
• 3. Center Point / Crosshair
• 4. Maximum Temperature and Position
• 5. Minimum Temperature and Position
• 6. Time
• 7. Column Maximum Temperature
• 8. Temperature Column
• 9. Column Minimum Temperature
• 10. N: Normal Temperature (or H: High Temperature when high-temperature range is selected)
• 11. Emissivity
• 12. Detection Distance

Settings Interface

Access and adjust various settings via the settings menu:

• Emissivity: Essential for accurate temperature measurement. Adjust based on material properties.
• Distance: Set the distance to the target for improved accuracy.
• Temp Range: Select between Normal (-20°C to 150°C) and High (100°C to 550°C) temperature ranges.
• Temperature Units: Choose between Celsius (°C) and Fahrenheit (°F). You can also set the ambient temperature for increased accuracy with low-emissivity materials.
• Palette: Select different color palettes for thermal image display.
• HI/LO Alarm: Configure high and low temperature alarms.
• Display: Adjust display settings.
• Display Brightness: Control the screen brightness.
• Date & Time: Set the device's date and time.
• Correction: Perform necessary corrections.
• USB Mode: Configure USB connection mode.
• Snap Mode: Select image capture mode.
• Auto Power Off: Set the auto power-off timer.
• Language: Choose the display language.
• Format Disk: Format the internal storage.
• Factory Reset: Reset the device to factory defaults.
• Dev Info: View device information.

Configuration Instructions

Follow these steps to configure the TR10:

1. Press the SET button to enter the configuration menu.
2. Use the ▲▼ buttons to navigate to the desired option and press SET to enter its settings.
3. Use the ▲▼ buttons to edit values or select sub-options.
4. Press SET to confirm and save changes.
5. Short press the Power/Return button to go back to the main settings menu.

Emissivity Setting

Correct emissivity setting is crucial for accurate temperature readings. The emissivity can be set between 0.01 and 0.99. Refer to the table below for common material emissivity values:

Distance Setting

To enhance temperature detection accuracy, set the distance information before measurement. Select the distance option, press SET, and use the ▲▼ buttons to set the distance value between 0.3 and 3 meters. Press the Power/Return button to return to the main settings menu.

Temperature Range Setting

Select 'Temp Range' and press SET to enter the settings. Use ▲▼ to switch between Normal (-20°C to 150°C) and High (100°C to 550°C) temperature ranges. Press SET to confirm. Note that switching ranges takes approximately 10 seconds.

Unit Setting

Select 'Temperature Units' and press SET. Use ▲▼ to switch between °C and °F. Press SET to confirm. You can also set the ambient temperature to improve measurement accuracy for low-emissivity materials. Press SET again to input the ambient temperature value using the ▲▼ buttons. Press the Power/Return button to return to the main settings menu.