User Guide for LOREX models including: Lorex App For Wi-Fi Smart Light Bulb Camera, App For Wi-Fi Smart Light Bulb Camera, Wi-Fi Smart Light Bulb Camera, Smart Light Bulb Camera, Light Bulb Camera, Camera
Lorex Technology Inc. SL300-Z 2K Wi-Fi Smart Lightbulb Camera UCZ-SL300-Z UCZSL300Z sl300 z
File Info : application/pdf, 6 Pages, 5.52MB
DocumentDocumentRegulatory Information IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. L'appareil ne doit pas produire de brouillage, et 2. L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet équipement doit être installé à une distance minimale de 20 cm entre le radiateur et votre corps. FCC Statement Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Caution: The user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. For full FCC compliance declarations, visit https://www.lorextechnology.com/FCC-compliance Declaration of Conformity UKCA This device complies with UKCA relevant directives and standards. UK Declaration of Conformity (DoC) can be downloaded from: https://www.lorextechnology.com/UKCA-compliance Lorex Technology UK Limited 1 Georges Square, Bath Street, Bristol, United Kingdom, BS1 6BA.