Introduction
Thank you for purchasing this Helium Touch Table Lamp. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please keep these instructions for future reference.
Warnings
Please read these instructions carefully before commencing any work. For your safety, always switch off the supply before changing lightbulbs, cleaning or removing shades. Always take care when handling lightbulbs to avoid injury in case of breakage.
Parts List
- 1 x Fitting
- 1 x Glass shade
- 1 x Shade adaptor ring & tool
Assembly Instructions
Step 1: Fitting the Shade and Bulb
Fit the shade and bulb before plugging the lamp into the mains. Refer to the assembly drawing.
Step 2: Attaching the Glass Shade
Remove the shade ring from the thread on the arm. Place the glass shade over the thread and refit the shade ring, using the supplied tool. Do not overtighten. Keep the tool for future use.
Step 3: Fitting the Bulb
Fit the supplied bulb by pushing it in. To remove, pull it out. Your standard lamp is now ready for use.
Touch On/Off Switch
This product is fitted with a touch on/off switch. Simply touch the product to switch it on and off.
For Use and Care
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish. For glass parts: Remove and wash in warm water or use a damp cloth. Do not use abrasive materials as these will damage the finish.
Recommended Bulb
- 1 x 40 Watt G9 Halogen Capsule
- or
- 1 x 2.5W LED G9
- or
- 1 x 28 Watt G9 Eco Halogen Capsule
When changing a bulb, always switch off at the mains and allow the bulb to cool before handling. Dispose of used bulbs carefully. Do not exceed the wattage stated or use a different shape bulb from that indicated on the fitting. Use a soft cloth to handle G9 bulbs; avoid directly touching the bulbs as this will shorten their life. Always take care when handling glass parts and lightbulbs to avoid injury in case of breakage.
Specification
Maximum wattage: 40W
Voltage: 240V, 50Hz
Compliance: CE
Support and Contact
We have taken great care to ensure that this product reaches you in perfect condition. However, should any parts be damaged or missing please contact our Product Helpline on (01202) 690945.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
