Beam Mobile GM705 Magnetic Wireless Charging Power Bank
Product Overview
This section provides a general overview of the Beam Mobile GM705 Magnetic Wireless Charging Power Bank.
Accessory List:
- Primary Unit (Power Bank)
- USB-C to USB-C Cable
Product Details:
- Magnetic Wireless Charging Power Bank
- Features a USB-C port for charging.
- Includes a power button.
- LED indicators for charging status.
Charging Instructions
This section details how to charge your devices using the power bank.
Power Switch Guide
- To Activate: Press 1 time.
- To Deactivate: Press 2 times.
Low Power Charging Mode
To activate Low Power Charging Mode, press and hold the power switch for 3 seconds. The LED indicator will turn blue. This mode is suitable for low-power devices like Bluetooth headsets. To exit this mode, press and hold the power switch for 3 seconds again.
Wireless Charging Guide
When the device is connected, simply place your phone on the wireless charging area. Charging will begin automatically.
LED Indication Guide (Wireless Charging):
- LED indicates charging status.
Charging Through Cable
Connect your device to the power bank using a USB-C cable.
LED Indication Guide (Cable Charging):
- LED indicates charging status.
Power Bank Recharge
Connect the power bank to a power adapter using a USB-C cable to recharge it.
LED Indication Guide (Power Bank Recharge):
- LED Status: Indicates the charging status of the power bank.
- LED Color: Blue indicates charging, Red indicates fully charged.
- Percentage Indicators: Four LEDs indicate the remaining battery percentage (e.g., 25%, 50%, 75%, 100%).
Product Parameters
| Name of Product | Magnetic Wireless Charging Power Bank |
| Model | GM-705 |
| Battery Type | Lithium Polymer Cell |
| Conversion Efficiency | ≥90% |
| USB-C Input | 5V/2A, 9V/2A |
| Charge Limit Voltage | 4.45V |
| USB-C Output | 5V/3A, 9V/2.22A, 12V/1.67A |
| Operating Temperature | -10°C to 45°C |
| Wireless Charging Output | 5W, 7.5W, 10W, 15W |
| USB-C + Wireless Charging | Total output 18W Max |
| Output Wattage | Max 15W |
| Battery Capacity | 5000mAh/18.5Wh (Rated capacity: 3000mAh) |
| Rated Capacity | 3000mAh (5V/1A) |
Certifications: FCC, CE, RoHS
Practices to Avoid
To ensure safe and optimal performance, avoid the following:
- Insufficient Charging:
- Placing the phone too far from the center of the wireless charging area.
- Using a phone case thicker than 5mm.
- Placing metal objects (like coins or credit cards) between the phone and the power bank.
- Using a phone case with metal attachments or a ring holder.
Potential Issues:
- Overheating: Can occur if the device is not placed correctly or if the ambient temperature is too high.
- Charging Malfunction: May occur due to improper placement or interference.
Diagrammatic Representation:
- Illustrations show correct and incorrect placement of the phone for wireless charging.
- Illustrations depict common mistakes like using metal objects or thick cases.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information: This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Hot Tips
- Please use the original or certified charging cables.
- Avoid using the product in extreme temperatures.
- Avoid contact with liquids.
- Prevent the product from dropping or shocking.
- Do not disassemble the product.
- Do not expose the product to heat or fire.
- Do not use the product if it is damaged.
- Cause severe battery leakage. In extreme cases, it may explode.
- Keep away from water and moisture.
- Keep the device away from children.
- Close the support beam when using the product to prevent it from rolling.
Important Note: Do not use magnetic wireless charging if your phone is not compatible or if you are using a phone case that interferes with wireless charging. If you experience slow charging or intermittent charging, ensure proper alignment and remove any obstructions.
Internal Warning: Internal charging is normal when the wireless charging is in use. Contact customer service if overheating occurs.