BlitzWolf Smart Socket Quick Start Guide

General Setup Note

If your wireless router has MAC address filtering, enter the router settings to disable MAC filtering before proceeding.

Specifications

• Plug Standard: EU
• Input: AC110~250V
• Max Load: 16A
• Wireless Type: ZigBee 3.0
• Operating Temperature: 0~40℃
• Material: ABS+PC
• Product Weight: 70g
• Product Size: 49*49*82mm

Before Using the Device

• The smart socket is a ZigBee version; configure the gateway before adding the socket.
• Ensure your smartphone is connected to a 2.4GHz Wi-Fi network.

App Operation

1. Install the 'BlitzWolf' App

Search for the 'BlitzWolf' app on the App Store or Google Play, or scan the QR code below to install it. Open the app and click [Register], or click [Login] if you have an account.

[QR code for downloading the BlitzWolf app]

2. Connect the Socket to the App

Quick Mode (Recommended)

• Enter the BlitzWolf app, click '+' in the upper right corner, select 'All Devices', then 'Socket (ZigBee)'.
• Confirm the indicator is flashing rapidly, select your Wi-Fi network, enter the Wi-Fi password, and the app will detect the socket.
• Wait for the socket to be set up correctly, then tap 'Complete' to enter the device page.

AP Mode

• Enter the BlitzWolf app and tap 'AP Mode' in the upper right corner of the 'Add Device' page.
• Press and hold the ON/OFF button for about 10 seconds (the indicator light will flash slowly).
• Select your Wi-Fi network and enter the password. Tap 'Go to connect', then connect your smartphone to the Wi-Fi hotspot named 'SmartLife-XXXX'.

Connecting to Alexa / Google Assistant

To link the smart socket, refer to the setup instructions for the Alexa control platform or Google Assistant control platform.

Troubleshooting

The socket fails to connect to the Wi-Fi network.

• Check the status of the LED indicator.
• Ensure you have entered the correct Wi-Fi password.
• If the socket is too far from the Wi-Fi router, move it closer.