Installation
This webcam is plug-and-play, requiring no additional drivers or software to install. Simply insert it into a USB 2.0 compatible port, and your computer will recognize it as a camera option. To set it as the default camera across all applications or programs, you may need to adjust your settings.
Setting as Default Camera
Windows 10: Navigate to Settings > Privacy > Camera.
macOS: Open PhotoBooth to change the computer's default camera from iSight to your Kogan USB Webcam.
Operating the Camera
To adjust the focal lens, turn the round knob located in the middle of the webcam.
To adjust the brightness, use the lighting dial found on the USB cable.
[Description of webcam images: The webcam features a square front with a fabric-like texture surrounding the lens. It is mounted on an adjustable stand with a clip mechanism for attaching to a monitor or surface. The side view shows the adjustable arm and the focal adjustment knob. The rear view shows connection points and the webcam's housing.]
Specifications
| Dynamic Pixels | 200W Pixels |
| Speed Rate | 30 FPS |
| Signal-to-Noise Ratio | 85db |
| Recommended Resolution | 1960 x 1080 Output |
| Format | USB 2.0 uncompressed YUY2 or MJPG |
| Interface | USB 2.0 compatible with USB 1.1 |
| Lumen per square metre | Max: 150 lux, Min: 2 lux |
| Imaging Range | 70cm - 90cm |
| Scintillation Control | 50Hz or 60Hz |
| Static Image Capture Format | BMP/JPEG/PNG |
| Sensor | CMOS 1/4 Colour Chip |
| Lens | 2P2G |
| LED Lamp Beads | 4 |
Notes
This section is provided for user notes and observations.
Need more information?
We hope this user guide has provided the assistance needed for a simple setup. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.
Visit: kogan.com
