Amazfit GTS 2e User Manual

01 Package Contents

The package includes:

• Smartwatch with band 1
• Charging base 1
• Instruction Manual 1

02 About the Watch

Key components of the watch:

• [Power Button]
• [Heart Rate Sensor]
• [Charging Plates]

Note: Press and hold the power button to turn on the watch. If it does not turn on, please charge it and try again.

03 Pairing the Watch

1. Scan the QR code on the Instruction Manual with your mobile phone to download the Zepp app. Alternatively, download the latest version from the Google Play Store or Apple App Store.
2. Open the Zepp app, register an account, and log in.
3. Follow the steps within the app to pair your watch correctly. The watch will display the correct time upon successful pairing.
4. Configure other watch functions as needed.

Note:

• For the best user experience, use the most recent version of the app.
• The operating system must be Android 5.0, iOS 10.0, or above.
• Do not pair the watch directly using your mobile phone's Bluetooth settings. Always follow the steps in the Zepp app for correct pairing.

04 Charging the Watch

1. Connect the watch's charging cable to a power adapter or a computer's USB port.
2. Place the watch into the charging base, ensuring the correct orientation and position. Verify that the metal contacts on the back of the watch align with the charging base.
3. The watch screen will display the charging progress once charging begins.

Note:

• Use the charging base provided with the watch.
• Ensure the charging base is dry before charging.
• Use a 1A or higher power adapter.

05 Disassembly and Assembly of the Watch Strap

Refer to the illustrations in the original manual for detailed steps on how to disassemble or assemble the watch strap. Ensure the strap is securely attached after assembly by gently pulling it.

06 Wearing the Watch

1. Wear the watch strap neither too tightly nor too loosely, allowing enough space for the skin to breathe. This ensures comfort and proper sensor function.
2. For accurate blood oxygen saturation measurements, wear the watch correctly: avoid placing it on the wrist joint, keep your arm flat, ensure a comfortable (appropriately tight) fit against the skin, and keep your arm still during the measurement. External factors like arm sag, sway, hair, or tattoos may affect accuracy or cause measurement failure.
3. It is recommended to tighten the watch strap during exercise and loosen it afterward.

07 Basic Parameters

• Product model: A2021
• Bluetooth frequency: 2400–2483.5 MHz
• Bluetooth version: BLE V5.0
• Water resistance rating: 5 ATM
• BLE output power: <5 dBm
• Operating temperature: 0°C to 45°C
• Input: 5V d.c. 500mA MAX
• Device requirements: Devices with Android 5.0 or iOS 10.0 or above.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Anhui Huami Information Technology Co., Ltd. uses these marks under license. Other trademarks and trade names belong to their respective owners.

View product certification information on the watch's Settings > System > Regulation page.

08 Regulatory Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AC8UA2021

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC: 21806-A2021

CAN ICES-3(B)/NMB-3(B)

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

09 Disposal and Recycling Information

Products bearing the WEEE symbol are waste electrical and electronic equipment. They should not be mixed with unsorted household waste. Protect human health and the environment by handing over your waste equipment to a designated collection point for recycling. Correct disposal and recycling help prevent potential negative consequences. Contact local authorities for more information on collection points.

10 Certifications and Safety Approvals

Anhui Huami Information Technology Co., Ltd. declares that the radio device type A2021 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://support.amazfit.com/en.

For more regulatory information and product certification/compliance logos, refer to the Regulatory section on your Amazfit GTS 2e.

11 Battery Safety

1. The device has a built-in battery that cannot be removed or replaced. Do not disassemble or modify the battery yourself.
2. Disposing of a battery into fire or a hot oven, or mechanically crushing or cutting it, can result in an explosion.
3. Leaving a battery in an extremely high temperature environment can result in an explosion or leakage of flammable liquid or gas.
4. A battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.

12 Safety Notice

1. Do not allow children or pets to bite or swallow the product or its accessories, as this may cause injury.
2. Do not place this product under excessively high or low temperatures, which may cause it to catch fire or explode.
3. Do not place this product near heat sources or open flames, such as ovens and electric heaters.
4. Some individuals may experience allergic skin reactions to materials used in the product. If symptoms like redness, swelling, or inflammation occur after prolonged contact, discontinue use and consult a doctor.
5. Do not use unauthorized or incompatible power adapters, chargers, or data cables, as they may damage the watch and accessories, or cause fire, explosion, or other hazards.
6. Radio waves generated by this product may affect the operation of implanted medical devices or personal medical devices, such as pacemakers and hearing aids. Consult the manufacturer of your medical device for usage restrictions.
7. Do not dispose of this device or its accessories as ordinary household waste. Comply with local regulations for disposal and support recycling efforts.

13 Repair and Maintenance

1. Avoid using detergents like soap, hand sanitizer, bath foam, or lotion for cleaning to prevent chemical residues from irritating the skin, corroding the device, or degrading its water resistance.
2. After wearing the device during bathing, swimming, or sweating, promptly clean and dry the device.
3. The leather strap is not waterproof. Avoid getting it wet to prolong its service life.
4. When using light-colored watch straps, avoid contact with dark clothing to prevent staining.
5. Do not wear your watch during snorkeling, showers, hot springs, saunas, diving, water skiing, or other activities involving high-speed water currents.
6. Do not expose the device to direct sunlight for extended periods, as extreme temperatures may cause failure.
7. Handle with care during transportation. Keep the device dry and away from humidity.

14 Troubleshooting

For troubleshooting, please check the FAQ on the website: https://support.amazfit.com/en.

15 Warranty and Return Policy

The Amazfit Limited Warranty covers manufacturing defects from the original purchase date. The warranty period is 12 months or as required by applicable consumer laws. This warranty is in addition to rights provided by consumer laws.

Official website: en.amazfit.com

Support: support.amazfit.com