Sonoff 4CH Pro R2 User Manual
First Start-up
Before the first start-up and connection of the Sonoff device, you need to download the mobile application eWelink to control the devices. The application can be found on Google Play and Apple iTunes.
Android: https://play.google.com/store/apps/details?id=com.coolkit&hl=sk
iPhone: https://itunes.apple.com/us/app/ewelink-smart-home-control/id1035163158?mt=8
Manual for connecting to the eWelink application: Manual Sonoff + eWelink Slovak Guide
After downloading and installing, you must register in the application (create a new account). If you already have an account, just log in.
Connection Instructions for Sonoff 4CH Pro and R2
Power supply: 90-250V AC (50 / 60Hz), 10A. / 5-24V DC
Output voltage: 90-250V AC 50 / 60Hz / 5-24V DC
Max. Power: 2200 W / gang, 2200 W / total
Maximum load: 220V 10A
WiFi standard: 2.4 GHz b / g / n
Radio frequency: 433 MHz
Modes: Inching / Interlock / Self-locking
Delay time in Inching mode: 250ms - 4000ms / 1 - 16s
To connect the Sonoff 4CH Pro and R2 with lights or appliances, carefully follow the wiring diagram shown below. The board features:Diagram of Sonoff 4CH Pro board components
You can choose a 5-24V DC or 90-250V AC power supply. Each relay has no output voltage.
The R1-R4 switches function as local control switches; you can turn on/off the respective channel by pressing them directly. They also function as pairing buttons for the remote control.
If you connect the Sonoff 4CH Pro with a motor, the connection instructions are shown below:
AC Motor Wiring Diagram
Toggle S6 to 0
Input AC 90-250V connected to L and N terminals.
Motor 90-250V AC connected to the relay outputs.
Note: Only 1 motor can run.
DC Motor Wiring Diagram
Toggle S6 to 0
Input 5-24V DC connected to the DC input terminals.
Motor 5-30V DC connected to the relay outputs.
Note: Only 1 motor can run.
WiFi Remote Controller Setup
Toggle K5 to 0000
Toggle S6 to 1
Set delay time, toggle K6 to 1S (1100)
After setting up the device, power it on using the 90-250V AC (50 / 60Hz) or 5-24V DC power supply. Then press and hold one of the buttons for 5s until the WiFi LED blinks three times.
Pairing with eWelink App
Next, press '+' in the eWelink app and select the first option (Quick Pairing Mode).
Quick Pairing Mode (Touch):
Turn on the device, then press and hold the pairing button for 5 seconds until the indicator LED starts blinking in a cycle of 2 short, 1 long blink.
For LED bulbs, strips, or humidifiers, turn the device off/on 3 times within a 2-second interval. The indicator LED will blink rapidly.
Compatible Pairing Mode (AP):
Select WiFi network:
WiFi Name: wifi-sonoff.sk
WiFi Password: heslo-sonoff.sk
Remember Password
Next
Pairing:
Please ensure your phone and devices are within WiFi router range.
Attempting to connect device...
Wait please...
Cancel
Follow the standard procedure as with other devices; finally, name the device.
If there is an error, check and repeat the action:
- You may have entered the wrong WiFi password.
- Ensure your smartphone or tablet is connected to 2.4 GHz WiFi with internet.
- Sonoff is too far from the router and the WiFi signal is too weak. Move the device closer to the router.
- The WiFi LED blinks green twice every second: The Sonoff device has connected to WiFi, but the connection to the server was unsuccessful. Check your network connection to see if your router allows it or has MAC address blocking.
Operating Modes
You can switch between three operating modes: Inching / Interlock / Self-locking
1. Self-locking Mode
In self-locking mode, you can turn on/off 4 connected devices independently. For example, if you turn on CH1, the connected device will continue to operate. If you turn off the device, the connected device will stop. Toggle K5 to 1100 Toggle S6 to 1 Toggle K6 to 1s (1100) Input AC 90-250V connected to the relay outputs.Self-locking Mode + Inching Mode GIF
2. Inching Mode
In inching mode, you can turn on connected devices for 0.25-4s (1 to 16s for Sonoff 4CH Pro R2). For example, you can turn on connected device CH1 for 1s, then it will automatically turn off. Toggle K5 to 0000 Input AC 90-250V connected to the relay outputs. Toggle S6 to 1 Toggle K6 to 1s (1100)Inching Mode GIF
3. Interlock Mode
In interlock mode, you can turn on 1 device and simultaneously turn off other devices at any time. For example, if you turned on CH2, then when you turn on CH3, CH2 will automatically turn off.
Interlock Mode GIF
Toggle S6 to 0
Input AC 90-250V connected to the relay outputs.
Self-locking Mode + Inching Mode GIF
Toggle K5 to 1100
Input AC 90-250V connected to the relay outputs.
Toggle S6 to 1
Toggle K6 to 1s (1100)
Switch Configuration
The switches are S5, S6, K6, and K5.
WARNING: If you are switching S5, S6, K5, K6, disconnect the power supply. Whether you use DC or AC input, make sure to always unplug the power cord!!! It is very dangerous if you do not interrupt the power; new settings cannot be activated, and you may damage the device.
| Position | Mode | Apply to |
|---|---|---|
| 0 | Interlock | CH1 to CH4 |
| 1 | Self-locking/Inching | CH1 to CH4 |
| Position | Status | Mode | Apply to |
|---|---|---|---|
| 1 | 0 | Inching | CH1 |
| 2 | 0 | Inching | CH2 |
| 3 | 0 | Inching | CH3 |
| 4 | 0 | Inching | CH4 |
| 1 | 1 | Self-locking | CH1 |
| 2 | 1 | Self-locking | CH2 |
| 3 | 1 | Self-locking | CH3 |
| 4 | 1 | Self-locking | CH4 |
Note: Cut off the main supply before changing work mode.
S6 interlock /inching&self-locking switch: Switching to (0) enters interlock mode; switching to (1) enters inching & self-locking mode.
K5 inching/self-locking switch: From left to right, 1, 2, 3, 4 correspond to channel 1 (CH1), channel 2 (CH2), channel 3 (CH3), and channel 4 (CH4). Switch the switch down (0) for the respective channel to enter inching mode; switch the switch up (1) for the respective channel to enter self-locking mode.
Please note that if the S6 function is switched to position (0), your 4CH Pro is in interlock mode, and K5 cannot be set.
K6 is used to set the delay time for inching mode. From left to right are 1, 2, 3, 4 corresponding to CH1, CH2, CH3, CH4. For example, with the Sonoff 4CH Pro, switch all switches down (0000), the ramp-up time will be delayed by 4s (400ms); switch all switches up (1111), the delay time will be 0.25s (250ms).
| Value | Delay | Apply to |
|---|---|---|
| 0000 | 4000ms | CH1 to CH4 |
| 0001 | 3750ms | CH1 to CH4 |
| 0010 | 3500ms | CH1 to CH4 |
| 0011 | 3250ms | CH1 to CH4 |
| 0100 | 3000ms | CH1 to CH4 |
| 0101 | 2750ms | CH1 to CH4 |
| 0110 | 2500ms | CH1 to CH4 |
| 0111 | 2250ms | CH1 to CH4 |
| 1000 | 2000ms | CH1 to CH4 |
| 1001 | 1750ms | CH1 to CH4 |
| 1010 | 1500ms | CH1 to CH4 |
| 1011 | 1250ms | CH1 to CH4 |
| 1100 | 1000ms | CH1 to CH4 |
| 1101 | 750ms | CH1 to CH4 |
| 1110 | 500ms | CH1 to CH4 |
| 1111 | 250ms | CH1 to CH4 |
| Value | Delay | Apply to |
|---|---|---|
| 0000 | 16s | CH1 to CH4 |
| 0001 | 15s | CH1 to CH4 |
| 0010 | 14s | CH1 to CH4 |
| 0011 | 13s | CH1 to CH4 |
| 0100 | 12s | CH1 to CH4 |
| 0101 | 11s | CH1 to CH4 |
| 0110 | 10s | CH1 to CH4 |
| 0111 | 9s | CH1 to CH4 |
| 1000 | 8s | CH1 to CH4 |
| 1001 | 7s | CH1 to CH4 |
| 1010 | 6s | CH1 to CH4 |
| 1011 | 5s | CH1 to CH4 |
| 1100 | 4s | CH1 to CH4 |
| 1101 | 3s | CH1 to CH4 |
| 1110 | 2s | CH1 to CH4 |
| 1111 | 1s | CH1 to CH4 |
Pairing with 433MHz RF Remote Control
Learning the 433MHz RF remote control: Each gang can support 1 RF key, meaning each gang can remember the last learned RF key. Quickly press one of the switches below twice, then press one of the ABCD buttons on the remote control. If learned successfully, the button will light up red, and the corresponding status indicator light will blink green 4 times. You can press the button to turn on or off the respective channel.
Deleting the 433 MHz remote control coding: S5 is the button to delete the 433 MHz code. Press and hold it until 4 green LEDs light up on the display.
Removing the Module from the Phone
If the module is paired with the mobile phone application, it cannot be paired with another phone. If you intend to give the Sonoff switch to another user (e.g., sell it), you must first delete it from your application.
In case of a warranty claim or return of the switch, it is mandatory to delete it from the application before sending it. Otherwise, the warranty claim or return of the module cannot be accepted.
Warranty
The product has been carefully tested during manufacturing. If the product still shows a defect, please contact us. The warranty for all Sonoff devices for end-users is 24 months from the date of purchase.
The seller and manufacturer are not responsible for defects caused by improper use or rough handling of the product, or damage to trademarks (broken warranty seal or sticker). Defects arising from such causes are not covered by the warranty. In case of a warranty claim, first follow the procedure for deleting the module from the phone.
Information on Disposal of Electronic Equipment
The symbol indicates that electronic products, like this one, must not be disposed of with household waste. For proper disposal, hand over the product to designated collection points where it will be accepted free of charge. Further details can be requested from the local authority or the nearest collection point.
EU Declaration of Conformity
The importer (www.sonoff.sk, www.sonoff.eu) declares that the named device, based on its concept and construction, complies with the relevant requirements of the European Union.
Sonoff 4CH / 4CH PRO
- EN 62368-1: 2014
- EN 62311: 2008
- ETSI EN 301 489-1 V2.2.0 (2017 - 03)
- ETSI EN 301 489-17 V3.2.0 (2017 - 03)
- ETSI EN 300 328 V2.1.1 (2016 - 11)
RF devices fall into the category of radio equipment and may be used on the EU market without any restrictions or registration. The frequency band on which RF devices operate is 433.92 MHz with a radio frequency power of less than 20mW, thus complying with the ICNIRP standard according to EN 62479: 2010, which specifies the requirements for human exposure to electromagnetic fields in the range of 10 MHz to 300 GHz.
Warranty and after-sales service for products:
Webinfo Slovakia s.r.o. Priekopnícka 1 Bratislava 82106, www.sonoff.sk info@sonoff.sk tel: 0948652396.
Product Range Overview
SmartHome - Product Line
- Touch switch 1-2-3 gang
- 4-device controller DIN rail 3-mode
- Smart BASIC or RF remote control
- Intelligent bulb
- RF Bridge 433 + PIR, door alarm
- Intelligent socket
- Temperature and humidity measurement 10A - 16A
- Power measurement electrical energy 16A
- 2-device controller 16A
Compatibility
- Google Home
- eWelink
- Amazon Alexa
- Nest Google Nest
