Oricom OBH36T Quick Start Guide

1. Contents Inside Box

• Baby Unit (Camera): A small camera unit.
• Parent Unit: A handheld screen unit.
• Power Adaptors (x2): Two power adapters with USB-C connectors.
• Star Grip: A flexible stand or grip.
• Quick Start Guide: A booklet.

⚠️ WARNING: Strangulation hazard. Children have STRANGLED on cords. Keep this cord out of the reach of children (more than 1 metre away). Never use extension cords with AC Adaptors. Only use the AC Adaptors provided.

2. Setting up your Nursery Pal Premium

A. Connecting the Power Supply of the Baby Unit.

Connect the USB type-C plug of the power adaptor to the Baby Unit and the other end to mains power. Only use the enclosed adaptor (5V DC / 1500mA).

Privacy Protector: This is to disable the live camera video feed by blocking the camera lens.

• Press the knob to release the lock.
• You can move the protector to its open or closed position after the lock is released.
• When you hear the click sound, the protector is at its proper positions.

IMPORTANT: Make sure the privacy protector does not cover the camera lens when in use. Sound is NOT disabled when the protector covers the camera lens.

B. Connecting the Power Supply of the Parent Unit.

Connect the USB Type-C plug of the power adaptor to the parent unit and the other end to mains power. Only use the supplied adaptor (5V DC / 1500mA).

A rechargeable battery allows the parent unit to be used when not plugged into mains power. The battery provides up to 8 hours operation of the Parent Unit with the screen turned off. Oricom recommends charging for at least 4 hours before first use, and charging the battery each time the Parent Unit indicates that the battery is low.

• Press and hold the POWER button on the top of the Parent Unit to turn it ON.
• Flip out the stand on the back of the Parent Unit and rotate it by 90 degrees to set up the desktop stand.

3. Overview of Parent Unit

Key components of the Parent Unit:

• Touch screen display
• Antenna ?
• Vol +/- buttons
• Reset pin hole [Pin]
• Power socket
• Power button
• Flash light ?
• Speaker ?
• Ring stand

4. Basic operation of the keys

5. Touch screen operation

Menu Navigation:

• Swipe up at the screen bottom to pop up the menu bar.
• Swipe down at the screen bottom to hide the menu bar.
• Scroll left/right on the menu bar to see all the options.

Camera View Control:

• Swipe left/right to pan the camera view.
• Swipe up/down to tilt the camera view.

Note: Function works when in view mode only, and not whilst the menu is active.

Menu Icons

Audio Media Playback menu icons

* The playlist appears only if you make the audio recording via Hubble app.

6. Display icons

7. Setting up the Camera Unit for Wi-Fi® internet viewing

A. Install HubbleClub for Partners.

Scan the QR code with your smart device and download the HubbleClub for Partners from the App Store [App Store icon] or from the Google Play™ Store [Google Play icon] for Android™ devices. Install the HubbleClub for Partners on your device.

B. View on Compatible Smartphones and Tablets.

Diagram Description: A visual flow showing a Camera Unit connecting via Wi-Fi to Compatible Viewing Devices (Smartphones/Tablets).

1. Open the HubbleClub for Partners on your compatible smartphone or tablet.
2. Follow the in-app instructions to create your Hubble account and connect to your device.

Minimum system requirements:

• Smartphones/Tablets: iOS 12.0, Android™ 8.0

Wi-Fi® requirements: At least 0.6 Mbps upload bandwidth per Smart Monitoring Companion. Test your Internet speed at: http://www.speedtest.net/

8. Important Safety Information

• Oricom baby monitors are designed as an aid and should not be used as a substitute for responsible and proper adult supervision of a child.
• The baby monitor provides added reassurance via video/sound transmission when you are not in the same room as your baby, provided you stay within hearing range.
• The baby monitor is not a medical device, nor a device to prevent Sudden Infant Death Syndrome (SIDS) or "cot death". Do not rely on it for your baby's wellbeing; regularly check on your baby personally.
• Keep baby unit, parent unit, and mains adaptor cables out of reach of your baby and other young children at all times, as far away as practical.
• Never place the baby unit or parent unit inside your baby's cot, bed, or playpen.
• Never cover the parent or baby units with clothes, towels, blankets, or any other item.
• Never use or place your parent or baby unit in or near moisture or water (e.g., near bath or pool). Immersing in water could cause electric shock and even death.
• Installation location is important for proper operation. Maintain a distance of at least one metre from other electronic equipment (e.g., microwave ovens or Wi-Fi devices) to avoid interference.
• During continual use, baby unit power adaptors may become warm. This is normal and not a concern.
• This product is not a toy; do not allow children to play with this monitor.
• This device is designed for indoor use only.

9. General Information

Express Warranty (Australia)

This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756, referred to as "Oricom".

Oricom warrants that the product is free from defects in materials or workmanship during the Express Warranty Period. This Express Warranty does not extend to products from which the serial number has been removed or products purchased outside of Australia.

The benefits of this Express Warranty are in addition to other rights and remedies available under the Australian Consumer Law. Oricom's goods come with guarantees that cannot be excluded under the Australian Consumer Law. Consumers are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. Consumers are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. In the event of a minor failure, Oricom reserves the right to choose to repair or replace the product.

The Express Warranty Period is 24 months beginning on the date of purchase, evidenced by the dated sales receipt. Proof of purchase is required to receive Express Warranty services.

Consumers are entitled to a replacement product or repair of the product at Oricom's discretion according to the terms and conditions of this document if the product is found to be faulty within the Express Warranty Period. This Express Warranty extends to the original purchaser only and is not transferable.

Products distributed by Oricom are manufactured using new materials or new and used materials equivalent to new in performance and reliability. Spare parts may be new or equivalent to new. Spare parts are warranted to be free from defects in material or workmanship for thirty (30) days or for the remainder of the Express Warranty Period of the Oricom branded product in which they are installed, whichever is longer.

During the Express Warranty Period, Oricom will, where possible, repair and if not, replace the faulty product or part thereof. All component parts removed under this Express Warranty become the property of Oricom. In the unlikely event of a recurring failure, Oricom may, subject to the Competition and Consumer Act 2010, at its discretion, elect to provide a replacement product of its choosing that is at least equivalent to the original product in performance.

No change to the conditions of this Express Warranty is valid unless made in writing and signed by an authorised representative of Oricom.

Oricom will not be liable under this Express Warranty, and to the extent permitted by law will not be liable for any defect, loss, damage, or injury arising out of or in connection with:

1. Failure to adhere to the warnings and follow the instructions set out in this user guide for the proper installation and use of the product.
2. Willful misconduct or deliberate misuse of the product.
3. Any external cause beyond Oricom's control, including but not limited to power failure, lightning, or over voltage.
4. Modification to the product or services carried out on the product by anyone other than Oricom or Oricom's authorised service provider.

How to make a claim under your Express Warranty in Australia

Oricom has a simple warranty process:

• Please call or email Oricom's Customer Support Team: 02 4574 8888 or support@oricom.com.au.
• A Customer Support Team member will verify after troubleshooting if your product qualifies under warranty. If so, they will provide a Product Return Authorisation number.
• Oricom will then email a Return Authorisation form and a Repair Notice (if necessary), together with instructions on how to return the product for warranty service.

Please note that if a Customer Support Team member advises that your product does not qualify for return, this warranty does not apply. Products authorised to be returned to Oricom in Australia must include:

• A completed Return Authorisation form.
• A copy of your Proof of Purchase (keep your original copy).
• The faulty product, including all accessories.

Send approved returns to:

Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia

Please note that this Express Warranty excludes expenses incurred by you in returning any faulty product. You must arrange and pay for all expenses incurred (including postage, delivery, freight, transportation, or insurance) to return the faulty product. Oricom will arrange delivery of the repaired or replaced faulty product.

Important Information - Repair Notice

Be aware that the repair of your products may result in the loss of any user-generated data (such as stored telephone numbers, text messages, and contact information). Ensure you have made a copy of any data saved on your product before sending for repair. Also, be aware that products presented for repair may be replaced by refurbished products or parts of the same type rather than being repaired.

Oricom Customer Support

Oricom has a trained and dedicated team of Customer Support Representatives, equipped with knowledge and resources to assist with questions quickly and efficiently.

Oricom Support - Australia

For all product enquiries, troubleshooting, or to discuss the range of Oricom products, feel free to contact Oricom or visit their website for answers to frequently asked questions.

Phone: (02) 4574 8888
Hours: Monday - Friday 8am – 6pm AEST
Email: support@oricom.com.au
Website: www.oricom.com.au

Oricom Support - New Zealand

Phone: 0800 674 266
Hours: Monday - Friday 10am - 8pm NZST
Email: support@oricom.co.nz

Ref: 2021-09-22