Owner's Manual for NOVASTAR models including: MBOX600P, 2AG8JMBOX600P, MBOX600 Pro Industrial Controller, MBOX600 Pro, Industrial Controller, Controller
Xi'an NovaStar Tech Co., Ltd MBOX600P 2AG8JMBOX600P 2AG8JMBOX600P mbox600p
File Info : application/pdf, 9 Pages, 954.34KB
DocumentDocumentMBOX600 Pro Industrial Controller Specifications MBOX600 Pro Industrial Controller Specifications Change History Document Version Release Date V1.0.0 2024-06-07 Description First release Introduction The MBOX600 Pro is an LED display controller created by NovaStar. It integrates an industrial PC and the sending capability. This controller is used outdoors and applies to the scenarios where no PC is used for LED display control, for example, fixed outdoor displays. A mouse, keyboard and monitor can be connected to the MBOX600 Pro for software installation, screen configuration, content playback, etc. Working with VNNOXCare Configuration and LCT Lite, the MBOX600 Pro can enable remote control, cabinet configuration, local playback, playback preview and more. Certifications EMC, CE RED, CE ROHS, CQC, SRRC, IC, IC ID, FCC SDoC, FCC ID, UL, CB, RCM If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible for the legal risks caused or NovaStar has the right to claim compensation. Features 4x Gigabit Ethernet outputs and pixel capacity: up to 2,600,000 Output scaling - The pixel width ranges from 64 to 4096. - The pixel height ranges from 64 to 1920. - Total pixel capacity cannot exceed 2,600,000. Common resolutions supported: 1366×768, 1440×900, 1600×900, 1920×1080, 2048×1152 1x Stereo audio output 1x HDMI 1.3 output (for image output or output preview) Connecting to a display and allowing for output scaling on an LED display 1x HDMI 1.3 input In synchronous mode, this connector is used as the input source. 2x USB 2.0 and 2x USB 3.0 Connecting to peripherals such as a mouse, keyboard and USB drive 2x Sensor connectors Connecting to a light sensor or temperature and humidity sensor 1x 6-pin Phoenix connector Connecting to a central control device, or control the power on and off of the connected device 2x Gigabit Ethernet ports One for communication and the other for remote management of device networking www.novastar-led.cn 1 Appearance Front Panel MBOX600 Pro Industrial Controller Specifications Name RESET USB 2.0 SIM SOURCE FN 1 FN 2 Rear Panel Description Power button Factory reset button Press and hold this button for 10 seconds to reset the product to its factory settings. 2x USB 2.0 Connecting to peripherals that support the USB protocol, such as a mouse, keyboard, and USB drive SIM card slot Capable of preventing users from inserting a SIM card in the wrong orientation. Button for switching between synchronous mode and asynchronous mode Custom button (to be implemented in future updates) Custom button (to be implemented in future updates) Ethernet port (default IP address: 192.168.0.10) Connecting to a router for remote management of device networking Name LED OUT Description 4x Gigabit Ethernet outputs www.novastar.tech 2 MBOX600 Pro Industrial Controller Specifications Name SENSOR 1 SENSOR 2 WIFI 4G/5G AUDIO OUT HDMI OUT HDMI IN USB3.0 ETHERNET Description Maximum pixel capacity: 2,600,000 When scaling is enabled, the maximum capacity is 2,600,000 pixels. (The pixel width ranges from 64 to 4096 and the pixel height ranges from 64 to 1920.) Connecting to a light sensor or temperature and humidity sensor Connecting to a light sensor or temperature and humidity sensor Connecting to a Wi-Fi antenna Connecting to a 4G/5G antenna Audio output 1x HDMI 1.3 output 1x HDMI 1.3 input 2x USB3.0 Connecting to peripherals that support the USB protocol, such as a mouse, keyboard, and USB flash drive. Gigabit Ethernet port Connecting to the control computer, or connecting to a LAN or public network for content publishing and screen control 1x 6-pin Phoenix connector for communication with and control of all central control devices that support RS232. RELAY denotes a relay connector for controlling the power on and off of the connected device. I/O denotes a connector that will be implemented in future updates. Power input Indicators Indicator PWR (Power indicator) Color Status Red Staying on Off Description The system is powered on and in standby mode. No power supply or powered off www.novastar.tech 3 MBOX600 Pro Industrial Controller Specifications HDD (Hard disk drive indicator) Green Flashing Off HDD is functioning normally. Powered off RUN (FPGA indicator) Green Staying on/off FPGA not loaded/no clock Flashing 2 times every second Video source accessed Flashing once times every 2s No video source Flashing 4 times every second The primary Ethernet port fails and the backup port is currently in use. WIFI (Wi-Fi network indicator) Green Staying on Off Wi-Fi network connection normal No Wi-Fi network connection 4G/5G (4G/5G network indicator) Green Staying on Network normal Flashing 4 times every second 4G/5G module detected but network abnormal Off No 4G/5G module detected HDMI (Synchronous source/ external source indicator) Green Staying on Selected but video source abnormal Flashing 2 times every second Selected and video source accessed Off Not selected IPC (Asynchronous source/ internal source indicator) Green Staying on Selected but video source abnormal Flashing 2 times every second Selected and video source accessed Off Not selected Applications The HDMI connector can be connected to a monitor to inspect the playback on an LED display, as well as to install software and configure the product. www.novastar.tech 4 MBOX600 Pro Industrial Controller Specifications Dimensions www.novastar.tech Tolerance: ±0.3 Unit: mm 5 MBOX600 Pro Industrial Controller Specifications Specifications Performance CPU N97: 4 cores, 3.6 GHz RAM 4 GB (9U4A3) 8 GB (9U8A4) HDD 128 GB (9U4A3) 256 GB (9U8A4) Connectors Front panel connectors 2x USB2.0 1x Gigabit Ethernet port Rear panel connectors 4x LED Output Ethernet ports 2x Sensor connectors 1x Wi-Fi antenna connector 1x 4G/5G antenna connector 1x Audio output 1x HDMI output 1x HDMI input 2x USB 3.0 2x Sensor connectors 1x Gigabit Ethernet port 1x 6-pin phoenix connector 1x Power input connector (DC 12 V) Maximum Capacity 2,600,000 pixels Maximum Power Consumption 34 W Operating Environment Temperature 20ºC to +60ºC Humidity 0% RH to 80% RH, non-condensing Storage Environment Temperature -40ºC to +80ºC Physical Specifications Dimensions 319.0 mm × 135.9 mm × 45.5 mm www.novastar.tech 6 MBOX600 Pro Industrial Controller Specifications Net weight 1778.0 g Packing Information Dimensions 361.0 mm × 334.0 mm × 141.0 mm Accessories 1x Power adapter 1x Power cable 2x Racks 6x Screws 1x Certificate of Approval The amount of power consumption may vary depending on various factors such as product settings, usage, and environment. Models CPU: 9U denotes N97. RAM: 4A denotes 4 GB and 8A denotes 8 GB. HDD: 3 denotes 128 GB and 4 denotes 256 GB. Operating System Model Linux/Windows 10/Windows11 MBOX600 Pro (9U4A3) MBOX600 Pro (9U8A4) CPU N97 N97 RAM 4GB 8GB HDD 128GB 256GB FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. www.novastar.tech 7 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. ISED Statement - English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). - French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélec triquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.