SP05 User Manual

Product Contains

• Open ear Earbuds x2
• Charging Case x1
• USB Charging Cable x1
• User Manual x1

Product Specifications

• Driver: 16.2mm
• Support Profile: HFP/AVRCP / A2DP
• Earbuds Charging Time: Up to 1.5 Hour
• Charging Case Charging Time: Up to 1.5 Hours
• Working Voltage: 5V
• Transmission Range: Up to 10m
• Working Temperature: -30°C - 70°C

Product Wear

Step 1: Take out the earbuds from the charging case.

Step 2: Hang the earbuds on your ears.

Product Control

Answer/End a Call

Short press the touch button twice to answer or end a call.

Reject Call

Long press the touch button for 2 seconds to reject a call.

Voice Assistant

Short press the touch button three times to activate the voice assistant.

Volume Up

Short press the Right touch button once to increase volume.

Volume Down

Short press the Left touch button once to decrease volume.

Play/Pause

Short press the touch button twice to play or pause music.

Previous Song

Long press the Left touch button for 2 seconds to go to the previous song.

Next Song

Long press the Right touch button for 2 seconds to go to the next song.

Power On/Off

1. Earbuds will auto power on and connect when taken out of the charging case.
2. Earbuds will auto power off and disconnect when placed back into the charging case.
3. If earbuds do not power on when taken out, please charge the charging case.
4. If earbuds do not power off when placed in the case, please charge the charging case.

First Pairing

1. Turn on the Bluetooth function on your cellphone/laptop.
2. Open the charging case and take out the earbuds. The red and blue lights will flash on the earbuds.
3. Select "SP05" on your phone/laptop and connect the device. The red and blue lights will turn off upon successful connection.

Note: The earbuds will automatically turn off if not connected to a device within 5 minutes.

Gaming Mode

Short press the touch button five times to enable or disable gaming mode. Gaming mode provides low latency audio for gaming.

Reset Earbuds

Use this procedure if only one earbud connects to the phone or if earbuds cannot pair with each other.

1. Take out the earbuds from the charging case.
2. Quickly touch the MFB (Multi-Function Button) 5 times, then hold the button for 3 seconds until the earbuds turn off.
3. When the red light turns off and the earbuds power off, the reset is successful. Place the earbuds back into the charging case and take them out again to connect to the device.

Product Charging

1. Place the earbuds back into the charging case to charge them.
2. Connect a USB Type-C cable to the charging case to charge the case.

Warranty

The warranty covers your device, including accessories, against manufacturing defects for 1 year from the date of purchase.

Certification

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2A5LA-SP05

Safety For You

• Do not expose the device to liquids, moisture, or humidity.
• Do not use abrasive cleaning solvents. Wipe with a slightly damp cloth if necessary.
• Remove and clean the earbud tips regularly for optimal sound quality.
• Do not expose the device to extremely high or low temperatures, as this may damage the battery or plastic parts.
• Do not dispose of the device in fire, as the internal battery may explode. ✔️
• Do not attempt to disassemble the device; there are no user-serviceable parts inside.
• Avoid dropping the device and keep it away from sharp objects.
• Only charge the device from 5V USB ports, such as phone chargers, laptops, or PCs.
• Never listen to music at high volumes to prevent permanent hearing damage.
• Pay attention to your surroundings and never wear headphones while riding, driving, or walking in traffic.