AcuRite Window Thermometer Instruction Manual

Introduction

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.

Features & Benefits

• 1. Current Temperature: Displayed in degrees Fahrenheit.
• 2. Suction Cup Mount: Easily mounted on a window.
• 3. ON/OFF Switch: With weather-resistant seal.

Unpacking Instructions

Remove the protective film that is applied to the screen prior to using this product. Peel off to remove.

Package Contents

• 1. Thermometer
• 2. Battery (pre-installed)
• 3. Instruction Manual

Activate Thermometer

1. Lift the rubber seal on the bottom of the unit to expose the ON/OFF switch.
2. Slide the ON/OFF switch to the "ON" position.
3. Push the rubber seal firmly into its original position to seal the unit.

Placement for Maximum Accuracy

AcuRite products are sensitive to surrounding environmental conditions. Placement in a proper location is critical to the accuracy of this product. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources.

Window Mount

Clean the area where the suction cup will be adhered to with a household window cleaner. Ensure the window is free of oil, grease, dust, or other matter. Moisten the suction cup. To mount, push firmly on the thermometer, pressing it against the window to form a strong suction. For best suction, select a surface that is hard, smooth, and non-porous. Do not use suction cups on wood or plaster.

Replace Battery

1. Remove the 2 small screws near the display on top of the unit with a small Phillips screwdriver.
2. Access the battery compartment by gently separating the upper and lower halves of the unit.
3. Pull the clear strip outward to remove the old battery.
4. Replace the battery with a new button cell type L1154.
5. Firmly push together the two halves of the unit.
6. Replace the 2 screws.

Specifications

Battery Safety Information

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. BATTERY SAFETY: Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. Battery contains mercury. Do not put in trash. Recycle or manage as hazardous waste.

WARNING: THIS PRODUCT CONTAINS A BUTTON-CELL BATTERY. IF SWALLOWED, IT COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2 HOURS. SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED.

Questions?

Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com.

Warranty Information

IMPORTANT

PRODUCT REGISTRATION

Register online to receive 1 year warranty protection. Visit www.AcuRite.com

PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE

Limited One Year Warranty

At AcuRite, Chaney Instrument Co. warrants that all products it manufactures are of good material and workmanship and are free of defects when properly installed and operated for a period of one year from the date of purchase. We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits.

Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. Chaney expressly disclaims all liability for special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney's products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For in-warranty claims: Chaney Instrument Co. 965 Wells St. Lake Geneva, WI 53147