AcuRite 01535 High Resolution Weather Station

Unpacking Instructions

Remove the protective film from the LED screen by locating the tab and peeling it off.

Package Contents

• Display with Tabletop Stand
• 5-in-1 Sensor
• Power Adapter
• Mounting Hardware
• Mounting Brackets
• Instruction Manual

Product Registration

Register online at www.AcuRite.com to receive 1 year warranty protection. Product must be registered to receive warranty service.

Features & Benefits: 5-in-1 Sensor

The 5-in-1 sensor includes:

• Rainfall Collector Funnel
• Solar Cell Panel: Converts sunlight into power for the internal aspirating fan.
• Internal Aspirating Fan: Draws ambient air into the sensor for more accurate temperature measurement by reducing solar radiation heating.
• A-B-C Switch: ID code to identify the sensor.
• Battery Compartment
• Temperature & Humidity Sensors (internal)
• Mounting Point
• Wind Speed Anemometer
• Wind Direction Vane
• Mounting Bracket
• Mounting Hardware (5 anchors & screws)
• Debris Filter: Pre-installed to prevent debris from entering the rain gauge.

Features & Benefits: Display

The Weather Overview Dashboard displays:

• Alarm ON Indicator: Shows when an alarm is activated.
• Current Outdoor Humidity: With an arrow indicating trend direction.
• Current "Feels Like" Temperature: Includes Heat Index (temp ≥ 80°F / 27°C), Dew Point (temp ≤ 79°F / 26°C), and Wind Chill (temp ≤ 40°F / 4°C).
• Barometric Pressure: With an arrow indicating trend direction.
• 12 to 24 Hour Weather Forecast: Self-Calibrating Forecasting uses sensor data for personalized forecasts.
• Clock
• Date & Day of the Week
• Rainfall Rate/Most Recent Rainfall: Displays current rainfall rate or total from the most recent rainfall.
• Rainfall History: Records for current week, month & year.
• Today's Rain Indicator: Illustrates rainfall collection up to 2 inches (50 mm).
• Messages: Displays weather information and alert messages.
• Peak Wind Speed: Highest speed from the last 60 minutes.
• Previous 2 Wind Directions
• Current Wind Speed: Background color changes based on speed.
• Current Wind Direction
• Average Wind Speed: Over the past 2 minutes.
• Sensor Low Battery Indicator
• Outdoor High Temperature Record: Since midnight.
• Current Outdoor Temperature: With an arrow indicating trend direction.
• Outdoor Low Temperature Record: Since midnight.
• 5-in-1 Sensor Signal Strength

The Indoor Overview Dashboard displays:

• Current Indoor Temperature: With an arrow indicating trend direction.
• Daily High & Low Temperature Records: Since midnight.
• Daily High & Low Humidity Records: Since midnight.
• Current Indoor Humidity: With an arrow indicating trend direction.
• Humidity Level Indicator: Shows high, low, or ideal comfort level.

Display Buttons:

• [Menu] Button: Accesses menu and setup preferences.
• [V] Button: Used for setup preferences and cycling through messages.
• [Mode] Button: Press to view a different dashboard.
• [T] Button: Used for setup preferences and cycling through messages.
• [ ] Button: Used for setup preferences.

Setup

5-in-1 Sensor Setup

1. Install or Replace Batteries: Insert 4 x AA batteries (alkaline or lithium recommended; lithium for temperatures below -4°F / -20°C). Follow polarity diagram. Replace battery cover.
2. Remove Rain Gauge Stabilizer: Remove the plastic tab taped inside the sensor's rain gauge.

Display Setup

After powering on, the display enters setup mode. Use the [ ] or [ V ] buttons to adjust settings and the [ ] button to confirm and move to the next preference.

Setup Order:

• TIME ZONE
• AUTO DST (YES/NO)
• CLOCK HOUR
• CLOCK MINUTE
• CALENDAR MONTH
• CALENDAR DATE
• CALENDAR YEAR
• PRESSURE UNITS (inHg or hPa)
• TEMPERATURE UNITS (°F or °C)
• WIND SPEED UNITS (mph, km/h, knots)
• RAINFALL UNITS (inches or mm)
• DISTANCE UNITS (miles or kilometers)
• AUTO DIM (YES/NO)
• AUTO CYCLE (OFF, 15 sec., 30 sec., 60 sec., 2 min., 5 min.)
• ALERT VOLUME

Enter setup mode anytime by pressing the [ ] button, navigating to "Setup", and pressing [ ].

Placement Guidelines

Display Placement

Place the display in a dry area, free of dirt and dust. It can be used on a tabletop or mounted on a wall.

5-in-1 Sensor Placement

The 5-in-1 sensor is designed for outdoor use. Choose an open location with no obstructions above or around the sensor for accuracy.

Important Placement Guidelines

• Wireless Range: Display and sensor must be within 330 feet (100 meters).
• Maximize Wireless Range: Place units away from large metallic items, thick walls, or metal surfaces.
• Prevent Wireless Interference: Place units at least 3 feet (.9 m) away from electronic devices.
• Locate Away From Heat Sources: Position sensor away from heaters, air conditioners, chimneys, exhaust vents, and heat-radiating surfaces like asphalt or concrete.
• Locate Away From Humidity Sources: Avoid installing near pools, spas, or other bodies of water.
• Locate Away From Sprinkler Heads: Do not install where sprinklers will spray the sensor.
• Locate Away From Wind & Rain Obstructions: Mount in a wide open area with few structures to ensure accurate wind measurement.

For installation photos and videos, visit www.AcuRite.com/5in1.

5-in-1 Sensor Installation

1. Installation Height: Mount at a minimum height of 5 feet (1.5 meters) in an open area. Higher mounting (e.g., 33 feet / 10 meters) is recommended for wind measurements.
2. Mounting Options: The bracket can be screwed onto wooden posts (2"x4" or larger) or mounted to a 3/4" steel pipe.
3. Solar Cell Installation: Install the sensor with the solar cell facing SOUTH to maximize sun exposure and properly orient wind direction.

Installation Steps:

1. Fasten the mounting base to a post or pole using the longer screws.
2. Insert the mounting base into the hole on the bottom of the sensor.
3. Ensure arrows on the sensor point correctly and the bubble level is centered. The solar cell should face south.
4. Fasten the sensor to the mounting base using the shorter screws.

Basic setup is complete. Synchronization may take a few minutes.

Using the Weather Station

Press the [ ] button to navigate the main menu:

• Records: View high/low values and trends.
• Alarms: Set temperature, humidity, wind speed, and rainfall alarms, plus a time alarm and storm alarm.
• Setup: Re-enter initial setup.
• Display: Adjust brightness, contrast, tint, screen cycle, and backlight (auto dim, sleep mode). Auto dim adjusts brightness based on time of day (100% from 6:00 AM - 9:00 PM, 15% from 9:01 PM - 5:59 AM). Sleep Mode dims the display during chosen hours, showing only essential readings.
• Sensor: Add, remove, or view sensor information.
• Units: Change measurement units for pressure, temperature, wind speed, rainfall, and distance.
• Calibrate: Adjust display or sensor readings. Select the unit, then the reading, and follow prompts.
• Factory Reset: Revert display to factory defaults.

Weather Forecast

AcuRite's Self-Calibrating Forecasting analyzes pressure changes over time (Learning Mode) to determine altitude and generate personalized 12-to-24 hour forecasts. Accuracy improves after 14 days and is optimized after 33 days of continuous operation.

Moon Phase

The moon phase is displayed between 7:00 PM and 5:59 AM, shown via icons: NEW, WAXING CRESCENT, 1ST QUARTER, FULL, 3RD QUARTER, WANING CRESCENT.

Expand the System

This weather station can be expanded to include lightning detection by connecting a compatible AcuRite Lightning Sensor (Model 06045, sold separately). Available at www.AcuRite.com.

Messages

The display shows real-time weather information and alerts. Manually cycle through messages using the [ ] or [ V ] buttons on the Weather Overview dashboard. Default messages include:

• HEAT INDEX - XX
• WIND CHILL - XX
• DEW POINT - XX
• IT FEELS LIKE XX
• OUTDOOR/INDOOR TODAY'S HIGH HUMIDITY
• OUTDOOR/INDOOR TODAY'S LOW HUMIDITY
• OUTDOOR XXX / INDOOR XXX TODAY'S HIGH TEMP.
• OUTDOOR XXX / INDOOR XXX TODAY'S LOW TEMP.
• 7 DAY HIGH TEMP. XX ° MM/DD
• 7 DAY LOW TEMP. XX ° MM/DD
• 30 DAY HIGH TEMP. XX ° MM/DD
• 30 DAY LOW TEMP. XX ° MM/DD
• ALL TIME HIGH TEMP. XXX... RECORDED MM/DD/YY
• ALL TIME LOW TEMP. XXX... RECORDED MM/DD/YY
• 24 HOUR TEMP. CHANGE +XX
• ALL TIME HIGH WIND XX MPH... RECORDED MM/DD/YY
• 7 DAY AVERAGE WIND XX MPH
• TODAY'S AVERAGE WIND XX MPH
• NEW LOW TEMP. RECORD XX
• NEW HIGH TEMP. RECORD XX
• NEW WIND RECORD TODAY XX
• 5-IN-1 SENSOR BATTERIES LOW
• 5-IN-1 SENSOR SIGNAL LOST... CHECK BATTERIES AND PLACEMENT
• CAUTION ° HEAT INDEX IS XXX
• CAUTION ° WIND CHILL IS XXX
• WARMEST DAY THIS WEEK
• COLDEST DAY THIS WEEK
• TODAY'S RAINFALL - XX

Troubleshooting

• No reception / no bars: Relocate units, ensure they are at least 3 ft (.9 m) from interference sources, use correct batteries, or synchronize units by removing power from both, then reinstalling batteries in sensor and power adapter in display, keeping them close together.
• Temperature showing dashes: May indicate wireless interference. Re-add sensor to display via "Sensors" sub-menu.
• Inaccurate forecast: Allow product to run continuously for 33 days for calibration. Forecasts predict 12-24 hours ahead, not current conditions.
• Inaccurate wind readings: Compare data with a sensor at the same mounting height (pro stations are often at 30 ft / 9 m). Ensure sensor is mounted at least 5 ft (1.5 m) high with no obstructions. Check that wind cups spin freely; lubricate if necessary.
• Inaccurate temperature or humidity: Ensure units are away from heat/ventilation sources and moisture sources. Mount sensor at least 5 ft (1.5 m) high. Calibrate readings if needed.
• Display screen not working: Check that the power adapter is securely plugged into the display and an electrical outlet.

For further assistance, visit www.AcuRite.com or call (877) 221-1252.

Care & Maintenance

Display Care

Clean with a soft, damp cloth. Avoid caustic cleaners or abrasives. Keep away from dust, dirt, and moisture. Clean ventilation ports with a gentle puff of air.

5-in-1 Sensor Care

• Clean the Sensor: Use a soft damp cloth. Avoid abrasive cleaners that could scratch the rain collector funnel or solar cell.
• Insect Prevention: Spray sensor with household insect repellent to prevent nesting. Follow repellent instructions.
• Snow & Freezing Weather: The sensor is freeze-proof. Snowmelt in the collector cup will register as rain.
• Clean the Rain Collector Cup: Remove and empty the debris filter located in the rain collector funnel.
• Clean the Wind Vane & Anemometer: Remove any foreign matter for free movement. Use a small amount of spray lubricant, clear silicone, or graphite powder on the anemometer if needed.

Calibrate the Rain Gauge

To improve rain gauge accuracy:

1. Ensure the 5-in-1 sensor is level using the built-in bubble level.
2. Place the display nearby to monitor during calibration.
3. Make a pinhole in the bottom of a plastic cup. Hold the cup over the rain gauge and fill it with exactly 1 cup (8 oz) of water, allowing it to drip into the gauge.
4. The display should register rainfall increments as the internal buckets tip.
5. The cup should take over 20 minutes to empty to simulate steady rainfall. The display should register approximately 1.06" (27 mm) when empty.

Tips:

• Aim for about 25 water drops between bucket tips. Adjust calibration screws on the bottom of the sensor if needed (clockwise increases rainfall, counter-clockwise decreases). Adjust equally on both screws (e.g., 1/8 turn for 2% adjustment).
• If buckets don't tip or water doesn't drain alternately, check the rain gauge or its adjustment (see Troubleshooting).

Watch the calibration video at www.acurite.com/5in1.

Specifications

• TEMPERATURE RANGE: Outdoor: -40°F to 158°F (-40°C to 70°C); Indoor: 32°F to 122°F (0°C to 50°C)
• HUMIDITY RANGE: Outdoor: 1% to 99%; Indoor: 1% to 99%
• WIND SPEED: 0 to 99 mph; 0 to 159 km/h
• WIND DIRECTION INDICATORS: 16 points
• RAINFALL MEASUREMENT: 0.01 inches (0.25 mm) and up
• WIRELESS RANGE: 330ft / 100m (depending on construction)
• OPERATING FREQUENCY: 433 MHz
• POWER: Display: 5V power adapter; Sensor: 4 x AA batteries
• DATA REPORTING: Display: 60 sec updates; Sensor: Wind Speed: 18 sec updates; Wind Direction/Outdoor Temp & Humidity: 36 sec updates

FCC Information

This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, try reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received.

Customer Support

For assistance, have your model number (01535) available and contact AcuRite:

• Phone: (877) 221-1252
• Website: www.AcuRite.com (Installation Videos, Product Registration, Manuals, Support Forum, Replacement Parts, Feedback)

IMPORTANT: PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE. Register online at www.AcuRite.com.

Limited 1-Year Warranty

AcuRite warrants products to be of good material and workmanship for one year from the date of purchase. If proven defective, AcuRite will repair or replace the item at its option. Transportation costs are the purchaser's responsibility. This warranty does not cover normal wear and tear, damage from misuse, improper installation, or unauthorized repairs. The remedy is limited to repair or replacement. AcuRite disclaims all other warranties, express or implied, including the implied warranty of merchantability and fitness for a particular purpose. AcuRite is not liable for special, consequential, or incidental damages. Liability is limited to the original purchase price.

This policy applies to purchases in the United States and Canada and only to the original purchaser.