Ceiling Fan Installation Guide
Packing List
- Hanger Bracket: A metal bracket designed for mounting the fan to the ceiling.
- Fan Motor Assembly: The main unit containing the motor and housing.
- Blade Arm (x3): Metal arms that attach the fan blades to the motor.
- Blade (x3): The fan blades themselves.
- Lamp: The light fixture component.
- Remote Control: The device used to operate the fan and light.
- Screw Pack: Contains various screws, washers, and potentially an Allen key (k) for assembly. Includes items labeled '3g', likely indicating screw types or weights.
Installation Steps
Step 1: Attach Blade Arms to Blades
Align the three Blade Arms with the corresponding holes on the three Blades. Secure each Blade Arm to a Blade using screws from the Screw Pack. Arrows indicate screws being inserted. [Screw symbol]
Step 2: Attach Blades to Motor
Attach the assembled Blades (with Blade Arms) to the Fan Motor Assembly. Use screws from the Screw Pack to secure each blade assembly to the motor. Arrows indicate screws being inserted. [Screw symbol]
Step 3: Connect Fan Motor Wires
Connect the wires from the Fan Motor Assembly to the corresponding wires (e.g., from the ceiling or power source). Arrows indicate wire connections. [Wire connection symbol]
Step 4: Connect Remote Receiver
Connect the Remote Control receiver unit to the fan's wiring. Arrows indicate wire connections. [Wire connection symbol]
Step 5: Attach Motor to Hanger Bracket
Mount the Fan Motor Assembly onto the Hanger Bracket. Secure it using screws provided in the Screw Pack. Arrows indicate screws being inserted from the sides and top. [Screw symbol]
Step 6: Secure Canopy
Slide the Canopy cover upwards towards the Hanger Bracket to conceal the wiring and mounting hardware. An upward arrow indicates movement. [Up arrow symbol]
Step 7: Mount Hanger Bracket to Ceiling
Secure the Hanger Bracket to the ceiling structure using appropriate screws (from the Screw Pack). Arrows indicate screws being driven into the ceiling. [Screw symbol]
Step 8: Insert Lamp
Insert the Lamp component into its designated housing on the fan assembly. The word "Insert" and an upward arrow indicate placement. [Insert symbol]
Step 9: Connect Lamp Wires
Connect the Lamp's wires to the fan's wiring system. Arrows indicate wire connections. [Wire connection symbol]
Step 10: Connect Remote Receiver and Insert
Connect the Remote Control receiver's wires to the fan's wiring. Then, insert the receiver unit into its designated compartment. Arrows indicate wire connections and insertion. [Wire connection symbol] [Insert symbol]
Step 11: Attach Lamp Shade
Attach the Lamp Shade to the fan assembly, ensuring it is properly aligned and secured. Arrows indicate alignment and securing. [Alignment symbol]
