Instruction Manual for BENCHDOGS models including: 9984689 Carpenter Square, 9984689, Carpenter Square

Instruction Manuals – BenchdogsUK EU

Not Your Device? Search For Manuals / Datasheets:

File Info : application/pdf, 6 Pages, 5.19MB

Document
Instruction Manual - Carpenter Square 2022 ?v=1650899584
INSTRUCTION MANUAL
Carpenter Square

ALIGNMENT PINS

WHAT'S IN THE KIT 1 x Carpenter Square  2 x Alignment Pins 

CARPENTER SQUARE

FIND ALL INSTRUCTION MANUALS AT
WWW.BENCHDOGS.CO.UK

90° & 45° MARKINGS 45°

STEP 1

STEP 2

ANGLED MARKINGS

STEP 1

90°

Place the carpenter square so the cheek is touching the side of your sheet. Using
either the straight or diaganol edge, make your markings at either 90°
or at 45°.

Using the supplied alignment pins, screw the first pin (RED) in the hole marked `PIVOT' and the second pin (YELLOW)
in the hole marked with your
desired angle.

Turn over your carpenter square and place so the alignment pins are touching
the edge of your sheet. Make your markings at either 5, 10, 15, 20, 22.5, 25, 30, 35, 40 or 45° by adjusting the
second pin (YELLOW)

FOR MORE INFORMATION PLEASE VISIT

C O N TAC T@ B E N C H D O G S . C O . U K

W W W. B E N C H D O G S . C O .U K

Q

E

M

STEP 1

STEP 2

STEP 3

ADDITIONAL MARKINGS

Find the holes marked 6mm, 7.5, 9 and 12.5mm.

Choose your desired measurement and screw in the supplied alignment pins in
the matching marked holes.

Turn over your carpenter square and place so the alignment pins are touching the edge of your sheet. This will allow
you to make accurate markings at 6mm, 7.5, 9 and 12.5mm from the edge.

FOR MORE INFORMATION PLEASE VISIT

C O N TAC T@ B E N C H D O G S . C O . U K

W W W. B E N C H D O G S . C O .U K

Q

E

M

7.5MM FROM THE EDGE

STEP 1
The sides of the cheek are accurately placed 6, 7.5 and 12.5mm from the edges
for quick meaurments and markings.

STEP 2

EXTRA FEATURES

6MM FROM THE EDGE

The flat corner to the carpenter square has handy markings for quick measurements and is also accurately 90°.

12.5MM FROM THE EDGE
FOR MORE INFORMATION PLEASE VISIT

C O N TAC T@ B E N C H D O G S . C O . U K

W W W. B E N C H D O G S . C O .U K

Q

E

M



References

Adobe PDF Library 16.0.3 Adobe InDesign 17.0 (Macintosh)