Kvm-tec.com: KVM Extender over IP - Matrix Switching SystemeKvm-tec.com: CLASSICLINE 48 - Full HD ExtenderKvm-tec.com: Click & Connect KVM Extender ConfiguratorKvm-tec.com: Click & Connect KVM Extender over IP
Instruction Manual for kvm-tec models including: 6501 Full HD KVM Over IP Extender, 6501, Full HD KVM Over IP Extender, KVM Over IP Extender, Over IP Extender, IP Extender, Extender
Kvm-tec.com: Classic 48 Full HD KVm Extender over IP
File Info : application/pdf, 2 Pages, 411.01KB
DocumentDocumentkvm-tec Support support@kvm-tec.com Phone: +43 2253 81912 - 30 smartline kvm-tec First Aid SVX No Power (No LED) USB is not working No Video Video error (stripes in the picture) Check the powerplug Is the power supply ok? Try another Unit. Try reprogramming the Unit by using a JTAG programmer Contact kvm-tec support Are the USB Devices plugged in correctly? Is the USB cable on the Local side plugged into the PC? Are the USB Devices working directly on the PC? Replace the USB cable from PC to the Local Extender Check if local and remote Unit have the same firmware Check if the local or the remote Unit is causing the problem by swaping first the local and than the remote Unit to another Unit Check if all cables are plugged in correctly Check if the PC is sending a Image by plugging in a monitor on the local out of the local Unit Check if the DDC is set correctly (in menu under point ,,O") Check if all cables are plugged in correctly Check if the PC is sending a Image by plugging in a monitor on the local out of the local Unit Check if the DDC is set correctly (in the menu under point ,,o") Check if both Units have the correct firmware Check if local and re- mote Unit have the correct firmware Contact kvm-tec support Check if the network switch is setup correctly and has enough bandwidth Check if other units have the same behaviour Contact kvm-tec support Contact kvm-tec support We are here for you to answer your questions about installation? Manual download www.kvm-tec.com or kvm-tec Installationchannel on our homepage personally +43 2253 81912 Misprints, errors and technical changes reserved Check out our Installation Channel: Smartline SVX 6501 SET 6501L CPU/LOCAL 6501R CON/REMOTE kvm-tec Quick Instruction www.kvm-tec.com DV I in from PC USB to PC KVM-TEC Smartline Monitor DC PC Out In Local / PC PC KVM-Link USB power plug 12V 2A DVI out to Monitor Misprints, errors and technical changes reserved DVI to Monitor Network cable CAT 5e/6/7 up to 150m/492ft power plug 12-24 VDC Quick Installation SVX1 SMARTLINE local / CPU remote / CON 1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power supply. 2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit. 3. Connect the CPU / Local and the CON / Remote Unit with a network cable. 4. Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in). Then connect the monitor with the DVI cable to the CON / Remote Unit. HAVE FUN - your kvm-tec Extender is now in use for many years (MTBF approx 10 years) USB from Keyboard and Mouse