Rigol DG992 Mains-powered Calibrated to (ISO standards) 100 MHz (max) 2-channel

Rigol DG952 Mains-powered Calibrated to (ISO standards) 50 MHz (max) 2-channel Arbitrary, Triangle, Pulse, Rectangle, Sinus, Lor Manual

Rigol DG992 Mains-powered Calibrated to (ISO standards) 100 MHz (max) 2-channel Arbitrary, Triangle, Pulse, Rectangle, Sinus, Lo Manual

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 16 Pages, 2.31MB

001783952ML04

-1-

RIGOL

QGB10000-1110

RIGOL RIGOL

RIGOL ISO9001:2015 ISO14001:2015

RIGOL service@rigol.com www.rigol.com

1. 9.

10.

11.

12.

13.

14.

15.

16. BNC

DANGER WARNING CAUTION

1. 2.
LCD

DG900/
RIGOL www.rigol.com

1. "+" Utility
2. "+"
3. " + " [Counter]

4. "" Utility Utility

DG900/DG992

DG952

50MHz

DG972

70MHz

DG992

100MHz

1. RIGOL

2. RIGOL
3. RIGOL

DG900 / / 1 2 3

12 11

3 4 5

6 7

CH1

CH2

Counter

8 9 10 11 12 13 ----

Menu Home LCD ----

10MHz /

CH1 //

CH2 //

USB HOST USB DEVICE AC

7 8 9 10

Store Utility U

AC 100-127V45-440Hz 100-240V45-65Hz 30W

DG900 Utility Language

DG900
1. Help/Local
2. Help/Local ""

3. Help/Local "" "" """"
4.
5. Help/Local

[CH1] 20kHz 2.5Vpp 500mVdc 90°

1. Output1

CH1

2. Menu Continuous"Sine"
6

3. 20 "kHz""Ok"
4. 2.5 "Vpp""Ok"
5. 500 "mVdc""Ok"
6. 90 "°""Ok"

7. Output1 Output1 [CH1]

8. BNC DG900 [CH1]

DG900 / USB GPIB RIGOL USB-GPIB SCPIStandard Commands for Programmable InstrumentsDG900 PC RIGOL Ultra Sigma
Help/Local Help/Local

1. Utility
2. Utility
RIGOLwww.rigol.com DG900 DG900SCPI DG900

Guaranty and Declaration

TrademarkInformation RIGOL is a registered trademark of RIGOL (SUZHOU) TECHNOLOGIES INC.

PublicationNumber QGB10100-1110

Notices RIGOL products are covered by P.R.C. and foreign patents, issued and pending. RIGOL reserves the right to modify or change parts of or all the specifications and pricing
policies at the company's sole decision. Information in this publication replaces all previously released materials. Information in this publication is subject to change without notice. RIGOL shall not be liable for either incidental or consequential losses in connection with the
furnishing, use, or performance of this manual, as well as any information contained. Any part of this document is forbidden to be copied, photocopied, or rearranged without prior
written approval of RIGOL.
ProductCertification RIGOL guarantees that this product conforms to the national and industrial standards in China as well as the ISO9001:2015 standard and the ISO14001:2015 standard. Other international standard conformance certifications are in progress.

ContactUs If you have any problem or requirement when using our products or this manual, please contact RIGOL. E-mail: service@rigol.com Website: www.rigol.com

General Safety Summary

1. Only the exclusive power cord designed for the instrument and authorized for use within the local country could be used.
2. Ensure that the instrument is safely grounded.
3. Observe all terminal ratings. 4. Use proper overvoltage protection. 5. Do not operate without covers. 6. Do not insert objects into the air outlet. 7. Use the proper fuse. 8. Avoid circuit or wire exposure.
Safety Notices and Symbols

9. Do not operate the instrument with suspected failures.
10.Provide adequate ventilation. 11.Do not operate in wet conditions. 12.Do not operate in an explosive
atmosphere. 13.Keep instrument surfaces clean and dry. 14.Prevent electrostatic impact. 15.Handle with caution. 16.Please use the front-panel BNC output
connector correctly. It is only allowed to output signal.

Safety Notices in this Manual:

WARNING Indicates a potentially hazardous situation or practice which, if not avoided, will result in serious injury or death.
1

CAUTION Indicates a potentially hazardous situation or practice which, if not avoided, could result in damage to the product or loss of important data.

SafetyTerms on the Product:

DANGER WARNING CAUTION

It calls attention to an operation, if not correctly performed, could result in injury or hazard immediately. It calls attention to an operation, if not correctly performed, could result in potential injury or hazard. It calls attention to an operation, if not correctly performed, could result in damage to the product or other devices connected to the product.

Safety Symbols on the Product:

Hazardous Voltage

Safety Warning

Protective Earth Terminal

Chassis Ground

Test Ground

Care and Cleaning

Care Do not store or leave the instrument where it may be exposed to direct sunlight for long periods of time.

Cleaning Clean the instrument regularly according to its operating conditions. 1. Disconnect the instrument from all power sources. 2. Clean the external surfaces of the instrument with a soft cloth dampened with mild detergent
or water. Avoid having any water or other objects into the chassis via the heat dissipation hole.When cleaning the LCD, take care to avoid scarifying it.

CAUTION To avoid damage to the instrument, do not expose it to caustic liquids.

WARNING To avoid short-circuit resulting from moisture or personal injuries, ensure that the instrument is completely dry before connecting it to the power supply.
Document Overview
This manual introduces some basic information that you should know when you use the DG900 series function/arbitrary waveform generator for the first time. It contains the following contents: product overview, how to connect the instrument to the AC power, turn-on checkout, and remote control.

Tip
For the latest version of this manual, download it from the official website of RIGOL (www.rigol.com).

Format Conventions in this Manual

1. Keys: The keys on the front panel are usually denoted by the format of "Key Name (Bold) + Text Box". For example, Utility.
2. Menu Labels: The menu labels are usually denoted by the format of "Menu Word (Bold) + Character Shading". For example, System Setting.
3. Connectors: The connectors on the front or rear panel are usually denoted by the format of "Connector Name (Bold) + Square Brackets (Bold)". For example, [Counter].

4. Operation Procedures: "" represents the next step of operation. For example, UtilitySystem Setting indicates pressing Utility on the front panel and then pressing the menu label System Setting.
Content Conventions in this Manual

DG900 series function/arbitrary waveform generator includes the following models. Unless otherwise specified, this manual takes DG992 as an example to illustrate the operation methods of the DG900 series.

Model DG952 DG972 DG992

No. of Channels 2 2 2

Max. Output Frequency 50 MHz 70 MHz 100 MHz

General Inspection

1. Inspect the packaging If the packaging has been damaged, do not dispose the damaged packaging or cushioning materials until the shipment has been checked for completeness and has passed both electrical and mechanical tests. The consigner or carrier shall be liable for the damage to the instrument resulting from shipment. RIGOL would not be responsible for free maintenance/rework or replacement of the instrument.
2. Inspect the instrument In case of any mechanical damage, missing parts, or failure in passing the electrical and mechanical tests, contact your RIGOL sales representative.
3. Check the accessories Pleasecheck the accessories according to the packing lists. If the accessories are damaged or incomplete, please contact your RIGOL sales representative.
Product Overview

As a multi-functional signal generator, DG900 series function/arbitrary waveform generator integrates many instruments into 1, such as function generator, arbitrary waveform generator, noise generator, pulse generator, harmonic generator, analog/digital modulator, and frequency counter. As a multi-functional and portable instrument, it offers you a new choice in education,

R&D, production, measurement, and other industries with its user-friendly touch screen and high performance at an unprecedented price point. For descriptions of the front panel, refer to Figure 1; for descriptions of the rear panel, refer to Figure 2; and for descriptions of the user interface (LCD), refer to Figure 3.

12 11

Figure 1 Front Panel

Table 1 Front Panel Description

No.

Description

No.

Power Key

Align Phase Key

CH1 Output Connector

Channel Control Area

CH2 Output Connector

Counter Measurement Signal Input Connector

Frequency Counter

----

3 4 5

6 7

Description Arrow Keys Knob Menu Key Home Key Function Keys
LCD Touch Screen
----

Figure 2 Rear Panel

Table 2 Rear Panel Description

No.

Description

No.

10MHz In/Out Connector

CH1 Sync/Ext Mod/Trig/FSK Connector 5

CH2 Sync/Ext Mod/Trig/FSK Connector 6

6
Description USB HOST USB DEVICE AC Power Cord Connector

7 8 9 10

Table 3 User Interface Icons

No.

Name

Channel Output

Configuration

Status Bar

Interface Switchover

Information Setting

Status Bar

Waveform

Interface Label

Frequency

Amplitude

Offset

Phase

Figure 3 User Interface

Description
Displays the current output configuration of the channel.
When left point is grayed out and the right point is illuminated, sliding right on the touch screen can switch to the waveform selection interface. When the left point is illuminated and the right point is grayed out, sliding left on the touch screen can switch to the current waveform parameter setting interface.
: opens the Store interface. : opens the Utility interface. : performs the channel copy function. : performs the screen print operation. : indicates that the front-panel keys and the screen are locked. : indicates that the beeper is disabled. : indicates that the instrument is in programming-controlled mode. : indicates that the instrument has been successfully connected to the local area network by using the network cable. : indicates that a USB storage device is found. Displays the currently selected waveform of each channel. Displays the label of the current interface. Displays the frequency of the current waveform of each channel. Displays the amplitude of the current waveform of each channel. Displays the DC offset of the current waveform of each channel. Displays the phase of the current waveform of each channel.
5

To Prepare for Use To Connect to AC Power Please use the power cord provided in the accessories to connect the signal generator to the AC power source, as shown in the figure below. The rated AC power source supported by the signal generator is (100-127 V, 45-440Hz) or (100-240 V, 45-65Hz), and its maximum input power shall not exceed 30 W. When the signal generator is connected to the AC power source via the power cord, the instrument automatically adjusts itself to within the proper voltage range, and you do not need to select the voltage range manually.
CAUTION To avoid electric shock, ensure that the instrument is correctly grounded.
Turn-on Checkout After connecting the instrument to the power source properly, press on the front panel to start the signal generator. During the start-up, the instrument will undergo the initialization and self-check process. Then, it will enter a default interface. To Set the System Language DG900 arbitrary waveform generator supports multiple languages. You can press UtilitySystem Setting, and then select a desired language from the Language drop-down list. To Use the Built-in Help System DG900 series provides the help information for each front-panel function menu and the current display interface. You can view the help information if you have any questions during the operation process. 1. Obtain the help information of the front panel keys
To get the help information about the front-panel keys, press the Help/Local key first, and then press the desired key for the help information. Then, the corresponding help information is displayed. 2. Obtain the common help topics Press Help/Local on the front panel, and then the following interface is displayed below. Tap "Help" to enter the help interface. At this time, you can tap on the touch screen to move up and down the help items or rotate the knob to scroll up and down the list to select the
6

desired help item. Then, the help information for the item is displayed in the interface.

3. Obtain the descriptions of the data in the interface Press Help/Local on the front panel to enter the interface, as shown above. Tap "Center" to view the descriptions for the data in the center of the current interface. Tap "Top" to view the descriptions for the data in the top part of the current interface. Tap "Bottom" to view the descriptions for the data in the bottom part of the current interface. Tap "Guide" to enter the guide interface.
4. Page up/down operation When the help information is displayed in multiple pages, you can tap to move up and down the touch screen to view the help information.
5. Close the current help information When the help information is displayed in the interface, press Help/Local on the front panel to close the help information currently displayed on the screen.
Example: To Output Sine
This section mainly introduces how to output Sine waveforms (frequency 20 kHz, amplitude 2.5 Vpp, offset 500 mVdc, start phase 90°) from the [CH1] connector.

1. Select the output channel: Press Output1on the front panel or tap the channel output

configuration status bar

to select CH1. At this time, the channel is indicated in

red in the status bar.

2. Select Sine waveforms: Press Menu on the front panel, and then the waveform selection interface is displayed. Tap Continuous and then select the "Sine"icon to go to the sine waveform parameter setting interface automatically.

3. Set frequency: Tap the Freq parameter input field to input 20 with the pop-up numeric keypad, and then select "kHz" as the unit. Tap "Ok".

4. Set amplitude: Tap the Ampl parameter input field to input 2.5 with the pop-up numeric keypad, and then select "Vpp" as the unit. Tap "Ok".

5. Set offset voltage: Tap the Offset parameter input field to input 500 with the pop-up numeric keypad, and then select "mVdc" as the unit. Tap "Ok".

6. Set start phase: Tap the Phase parameter input field to input 90 with the pop-up numeric keypad, and then select "°" as the unit. Tap "Ok".

7. Enable channel output: Press Output1 or tap the channel output configuration status

bar

to enable the channel output. Then,the backlight of Output1 key is

illuminated and the channel status is highlighted (

), and the Sine signal is output

from the [CH1] connector based on the current configurations.

8. Observe the output waveforms: Connect the [CH1] connector of the DG900 series to the oscilloscope by using the BNC cable, and then you can view the output waveforms from the oscilloscope.

Remote Control

DG900 series function/arbitrary waveform generator can be connected to the PC via the USBor GPIB (working with RIGOL USB-GPIB interface converter) to realize remote control. The remote control can be realized by using SCPI (Standard Commands for Programmable Instruments) commands. DG900 series signal generator supports two ways of remote control: user-defined programming and PC software (e.g. RIGOL Ultra Sigma).

When the instrument is in remote control, the front panel keys (except the Power key and Help/Local key) and the touch screen are locked. At this time, you can press Help/Local to exit the remote mode.

More Product Information

1. Obtain the device information Press UtilitySystem Info to obtain the information of the instrument, including the device model, device serial number, as well as software version number.

2. Check the option installation Press UtilityOption to view the installation status of all the options.

For more information about this instrument, refer to the relevant manuals by logging in to the
official website of RIGOL (www.rigol.com) to download them. DG900 User's Guide: introduces the functions of the instrument and the operation methods, remote control methods, possible failures and solutions in using the instrument, and order
information; DG900 Programming Guide: provides detailed descriptions of SCPI commands and programming instances of the instrument. DG900 Datasheet: provides the main features and technical specifications of the instrument.

Acrobat PDFMaker 10.1 Word 版 Adobe PDF Library 10.0