PBS2-RB100SG1SSDNMA0Z | PBS plus | SICK Sensors | PRESSURE SENSORS , Part Number : 6073956
Product data sheet PBS2-RB100SG1SSDNMA0Z PBS plus PRESSURE SENSORS PBS2-RB100SG1SSDNMA0Z | PBS plus PRESSURE SENSORS A Ordering information Type B PBS2-RB100SG1SSDNMA0Z C Other models and accessories www.sick.com/PBS_plus D E Illustration may differ F Part no. 6073956 H I J K L M N O P Q R S T Detailed technical data Features Medium Pressure type Pressure unit Measuring range Process temperature Maximum ohmic load RA Zero point adjustment Output signal Rotatable housing Display Mechanics/electronics Process connection Wetted parts Internal transmission fluid Pressure port Housing material Liquid, gaseous Gauge pressure bar 0 bar ... 100 bar 0 psi ... 1,450 psi 20 °C ... +85 °C 4 mA ... 20 mA (RA 0.5 kOhm) 0 V ... 10 V, 3-wire (RA > 10 kOhm) Max. + 3 % of span IO-Link/PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V Display against housing with electrical connection: 330 ° Housing against process connection: 320 ° 14-Segment LED, red, 4-digit, character height 9 mm, can be rotated electronically by 180° Update: 1,000, 500, 200, 100 ms (adjustable) G ¼ A according to DIN 3852-E Pressure connection: stainless steel 316L Pressure sensor: stainless steel 316L (for measurement ranges from 0 bar ... 10 bar rel stainless steel 13-8 PH) Silicone oil (only with pressure ranges < 0 bar ... 10 bar and 0 bar abs ... 25 bar abs) 3.5 mm Standard Lower body: stainless steel 304, Plastic head: PC + ABS, Buttons: TPE-E, Display window: PC 1) Enclosure rating IP per IEC 60529. The enclosure rating classes specified only apply when connected with female connectors that provide the corresponding enclosure rating. 2 PRESSURE SENSORS | SICK Product data sheet | 2024-07-06 10:04:26 Subject to change without notice PBS2-RB100SG1SSDNMA0Z | PBS plus PRESSURE SENSORS Connection type Supply voltage Power consumption Total current consumption Electrical safety Isolation voltage CE-conformity Weight sensor Seal Enclosure rating Protection class III MTTF M12 round connector x 1, 4-pin 15 V DC ... 35 V DC 45 mA (for configurations without analog output signal) 70 mA (for configurations with analog output signal) Max. 600 mA (including switching current) Protection class: III Overvoltage protection: 40 V DC Short-circuit protection: QA, Q1, Q2 towards M Reverse polarity protection: L+ to M 500 V DC EMC Directive: 2014/30 / EU (EN 61326-1:2013; EN 61326-2-3:2013), Pressure equipment directive: 2014/68 / EU, Hazardous materials (RoHS): 2011/65 / EU (EN 50581:2012) Approx. 220 g NBR seal installed, FPM/FKM seal included IP67 1) IP67 1) 104 years 1) Enclosure rating IP per IEC 60529. The enclosure rating classes specified only apply when connected with female connectors that provide the corresponding enclosure rating. Performance Non-linearity ± 0.25 %, of span (Best Fit Straight Line, BFSL) according to IEC 61298-2 Accuracy ± 0.5 % of the span Setting accuracy of switching outputs ± 0.5 % of span Response time 5 ms Long-term drift/one-year stability Temperature coefficient in rated temperature range ± 0.1 % of the span according to IEC 61298-2 0.2 % of the span According to IEC 61298-2 for measuring range 0.6 bar or flush-mounted membrane (0 psi ... 10 psi) Average TC of the zero point: ± 0.16% of the span / 10 K Average TC of the span ± 0.16% of the span / 10 K Rated temperature range 0 °C ... +80 °C Service life Minimum 100 Mio. load cycles Ambient data Ambient temperature Storage temperature Relative humidity Shock load Vibration load 20 °C ... +80 °C 20 °C ... +70 °C 75 % 50 g, 6 ms according to IEC 60068-2-27 (mechanical shock) 20 g, 10 Hz ... 2,000 Hz (IEC 60068-2-6, at resonance) Classifications ECLASS 5.0 ECLASS 5.1.4 ECLASS 6.0 ECLASS 6.2 ECLASS 7.0 27200620 27200620 27200620 27200620 27200620 2024-07-06 10:04:26 | Product data sheet S ubject to change without notice PRESSURE SENSORS | SICK 3 PBS2-RB100SG1SSDNMA0Z | PBS plus PRESSURE SENSORS A B C D E F H I J K L M N O P Q R S T ECLASS 8.0 ECLASS 8.1 ECLASS 9.0 ECLASS 10.0 ECLASS 11.0 ECLASS 12.0 ETIM 5.0 ETIM 6.0 ETIM 7.0 ETIM 8.0 UNSPSC 16.0901 27200620 27200620 27200620 27200620 27200620 27200620 EC000243 EC000243 EC000243 EC000243 41112409 Dimensional drawing (Dimensions in mm (inch)) G ¼ A DIN 3852-E 27 (1.06) 14 (0.55) G1/4A DIN 3852-E approx. Ø 38 (1.50) 29.5 (1.16) M12 x 1 approx. 72 (2.83) 36 (1.42) 26 (1.02) Ø 35 (1.38) 27 (1.06) Connection type M12 x 1, 4-pin 2 switching outputs/ 1 switching output + 1 analog output 2 3 1 4 L+ = 1, M = 3, Q = 4, Q = 2 1 2 C/Q = 4, Q = 2 1 A M12 x 1, 5-pin 2 switching outputs + 1 analog output 2 5 3 1 4 L+ = 1, M = 3, Q = 4, Q = 2, Q = 5 1 2 A C/Q = 4 1 4 PRESSURE SENSORS | SICK Product data sheet | 2024-07-06 10:04:26 Subject to change without notice Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is "Sensor Intelligence." Worldwide presence: Contacts and other locations www.sick.com SICK AG | Waldkirch | Germany | www.sick.comApache FOP Version 2.1