QUICK START GUIDE

Introduction

This window kit is designed to fit most standard "vertical" and "horizontal" window applications. Adjust to the desired length and secure with the provided metal wing nuts and bolts. This window kit will fit windows with dimensions of: MAXIMUM: 47" (120 cm) and MINIMUM: 9" (23cm). However, for some types of windows, you may need to custom cut one of the window sliders to fit your specific window.

Window Opening Size Guide

First condition:

For a 9"-25.5" window opening, use panel A (Cut short if necessary).

PANEL A

Diagram description: Panel A shown with dimensions 9 inches and 25.5 inches marked.

Note: Never cut out the small hole on the right hand side of Panel A, unless your window opening is less than 25.5 inches.

Second condition:

If the window opening is larger than panel A, cut Panel B, to desired length to fill window. For a 26"-47" window opening, use panel A+B (Cut panel B short if necessary).

PANEL A+B

Diagram description: Panels A and B shown together, with dimensions 26 inches and 47 inches marked.

CONNECT HOSE TO WINDOW KIT

1. Stretch the vent hose 6 inches (15CM) to facilitate the installation of the exhaust nozzle.

   Diagram description: Hands stretching a white vent hose.

2. Rotate the vent hose into the exhaust nozzle clockwise, and check to see that it is fastened securely to the hose.

   Diagram description: Hands connecting a white vent hose to a white exhaust nozzle.

3. Slide it for locking.

   Diagram description: Close-up of hands sliding a component into place for locking.

4. Insert hose outlet into the window panel A fully.

   Diagram description: Hose outlet being inserted into a window panel.

5. If you want to fix the connection more firmly, use the type A screw.

   Diagram description: A screw being used to secure the connection with a screwdriver.

Assembly Steps

1. Diagram description: Shows the components: Hose Outlet, Air Exhaust Hose, Hose Inlet, and Air exhaust hose assembly, with arrows indicating connection flow.

2. Diagram description: Shows the air exhaust hose assembly connecting to a portable air conditioning unit.

3. Connect with air conditioning outlet.

   Diagram description: Portable air conditioning unit with the exhaust hose attached. A hand is shown pushing a button labeled "PUSH".

4. Drain hose installed to the upper drain hole.

   Diagram description: A drain hose being connected to the upper drain hole of the air conditioning unit. A bowl is shown nearby.

5. Attach the window panel and snap the panel into place on the window.

   Diagram description: The window panel assembly being installed into a window frame.