T-fun NC95 Hybrid ANC Headphones User Manual

Safety Instructions

Hearing safety:

Headphones cannot be used while charging for your safety.
DO NOT use the headphones for any other purpose while driving.
Please use with caution and stop using the headphones in dangerous situations.
Please do not listen at high volume for a long time to avoid hearing damage.
For your safety, please do not turn the volume too high while running outside to ensure you can hear sounds in your surroundings.
Clean only with a dry cloth.

Operation Safety:

Use original or certified cables for charging, and ensure the voltage is within 6.3V. Power will be cut off, and protection mode will activate when the voltage exceeds 6.3V but within 36V. The headphones will be damaged if the voltage exceeds 36V.
Keep away from children to avoid danger from improper use.
Headphones cannot be charged or turned on in the extreme temperature. Please use headphones within the operating temperature range: 32°F (0°C)–113°F (45°C).
Do not submerge the headphones in water.
Do not use corrosive cleaner/oil to clean the headphones.
Turn off Bluetooth and ANC function to save power when you do not use the headphones.
Do not modify the product without authorization.

What's in the Box

The package includes:

NC95 Headphone x1
PU Pouch x1
Type C Charging Cable x1
AUX Audio Cable x1

At a Glance

The headphones feature the following controls and ports:

Volume Down (Anticlockwise rotation)
Volume UP (clockwise rotation)
ANC Button
Bluetooth/ANC LED indicator light
Multi-function Button
Charging Port
Charging indicator
AUX Port

How to Use

ANC Mode

Long press the ANC button for 2 seconds to turn on ANC when Bluetooth is on. The LED indicator will be green when ANC is on, and the green light will be off when ANC is off.

Transparency Mode

Long press the ANC button for 2 seconds to switch between ANC mode, Transparency mode, and Normal mode.

Low Latency Mode

Double press the ANC button to turn on/off Low Latency Mode when headphone Bluetooth is connected with your device.

Use Bluetooth Function

Hold the Multi-function Button for 5 seconds to turn the headphone Bluetooth on, then enter pairing mode. (The LED indicator light will flash quickly in blue and red.)
Start the Bluetooth on your mobile phone and find the headphone Bluetooth pairing name " NC95 " to click it and pair. (The LED indicator light will flash slowly in blue after successful pairing.)
Hold the Multi-function Button for 5 seconds to turn the headphone Bluetooth off.

Note: If the NC95 is not paired with any devices within 5 minutes after Bluetooth is turned on, it will automatically shut down to save power.

Adjust the volume by rotating the Multi-function button clockwise or counterclockwise.
Press the Multi-function Button to play/pause music, or to answer/end call.
Double press the Multi-function button to next song or reject an incoming call.
Previous song: Press 3 times.
Press the Multi-function button 4 times to activate Voice Assistant.
Turn off the headphone first, then long press the Multi-function button 10s to delete Bluetooth pairing.

Bluetooth Multipoint Connectivity

Connect to two devices simultaneously:

Turn on the headphones and enable Bluetooth on your first mobile phone. Search for " NC95" and connect.
Turn off the Bluetooth function on the first mobile phone (do not turn off the headphones).
Pair the headphones with the second device via Bluetooth successfully.
Return to the first Bluetooth device and reconnect it with NC95 again. Now both of your devices are paired with NC95 with easy switching.

Note:

Audio playback from the first device takes priority. If you want to listen to audio from the second device, pause the audio on the first device and then press play on the second.
Phone calls take priority. NC95 will automatically receive the call regardless of which device you're currently listening to audio on.

Wired Mode

Headphones support AUX input for wired external audio source connection. Simply turn headphone Bluetooth off and plug in the audio cable.

* ANC/Microphone/Buttons controls work only in Bluetooth mode, not in wired mode.

T-fun App

Download the " T-fun " app to enhance your experience. The app offers:

EQ settings: Choose from various EQ settings to optimize your experience.
Noise cancellation: Select active noise cancellation modes to reduce ambient noise according to your surroundings.
- Transport: Targets low-end frequencies, like engine and road noise, for peaceful journeys and commutes.
- Outdoor: Reduces ambient sounds in cities for less distractions.
- Indoor: Reduces voices and mid-frequency noise from coffee shops and other inside spaces.
Transparency: Stay aware of your surroundings by allowing ambient sounds in.
Firmware update: Receive notifications for new firmware versions when connected to the app.

App download is optional: You can use headphones basic functions via Bluetooth/Wired without the APP.

Tips: Install "English" as a second language on the phone (if your phone's language is non-English).

T-fun APP Download and Connection

Step 1: How to Download

T-fun APP can be downloaded from Apple App Store, Google Play, and the T-fun website.

[App Store icon] [Google Play icon] [T-fun website icon]

Step 2: Bluetooth pairing with your phone

Bluetooth Pairing name "NC95": Connect your headphones directly without needing to download any app.

Step 3: Open the T-fun APP and pair with your APP

Bluetooth Pairing name "NC95–APP": Use this option for enhanced features and functionality.

Voice Dialing

Press the Multi-function Button twice to activate the voice dialing function (compatible with iPhone Siri and selected Android voice dialing software).

How to Wear

100° inward rotation: Adjust the earcups by rotating them 100° inward.

Adjustable Headband: Customize the fit using the adjustable headband.

Headphone Specifications

LED indicator light

Pairing: Blue and red lights flash alternately
Paired: Blue light flashes
Playing: Blue light slowly flashes
Charging: Red light turns on
Full Charge: Red light turns off or Blue light turns on
Battery Low: Red light turns on with voice prompt
ANC ON: Green light turns on
ANC OFF: Green light turns off
Transparency mode: Green light turns on
Bluetooth OFF: Blue and red lights turn off

* Please note that the LED indicator light might mix to become other colors (such as pink, purple, etc.) occasionally.

Technical Specifications

Product Name: Wireless Headset
Battery Capacity: 1000mAh
Input: 5V/1A
Charging time: About 2.5 hours
Playtime: 65Hrs (60% Volume/ANC on)
Net Weight: 258g/0.57lb
Bluetooth Prohl: A2DP, AVRCP, HSP, HFP
Bluetooth Range: 15m/50ft
Impedance: 32 Ω
Driver Diameter: 40mm
Frequency Range: 20-20KHz
Operating Temperature Range: 32°F(0°C) – 113°F(45°C)

Solutions to PC connection problems

mac OS

Ensure the headphone is connected before starting software.

Connect via [Bluetooth icon], [USB Dongle icon], or [USB icon].

Navigate to System Preferences [Settings icon] > Sound. Select "NC95" for Output and Input.

Windows

Ensure the headphone is connected before starting software.

Connect via [Bluetooth icon], [USB Dongle icon], or [USB icon].

Navigate to Settings [Settings icon] > System [System icon] > Sound. Select "NC95 Hands-Free AG Audio" for Output and Input.

Charging

Use the included Type-C charging cable to connect to the headphone Charging Port. Connect the other end of the charging cable to a computer USB port or USB wall charger (under 6.3V voltage).

The LED indicator light will be off or blue when fully charged. The headphones cannot be used while charging.

NOTE: Do not charge the headphones if the ambient temperature exceeds the charging range of 32°F (0°C) to 113°F (45°C).

UPDATE THE HEADPHONES

Upgrade firmware when connected to the T-fun app.

CLEAN THE HEADPHONES

The headphones may require periodic cleaning. Wipe exterior surfaces with a slightly damp cloth.

Use only a water-dampened cloth. Do not use cleaning products. Do not allow moisture to enter the headphones through the ports or earcups.
Do not force dirt or debris into the ports. Do not blow air into or vacuum the ports or the interior of the headphones.

REPLACEMENT PARTS AND ACCESSORIES

Replacement ear pads cushion can be ordered through T-fun customer service.

LIMITED WARRANTY

Your headphones are covered by a limited warranty. Visit the T-fun website at t-fun.fun for details.

Troubleshooting:

Symptoms	Solutions
Reset	1. Insert the included 3.5mm audio cable into the headphone audio socket, then remove it. Reconnect (sometimes requires multiple resets). 2. Go to T-fun App settings, click "Reset Settings".
Delete Bluetooth	1. Turn off the NC95 headphones first, then long press the "Multi-function" button for 10 seconds. 2. Go to T-fun App settings, click "Delete Paired Bluetooth".
Bluetooth connection	On your device: 1. Disable and re-enable the Bluetooth function. 2. Remove the headphones pairing name from the Bluetooth list. 3. Clear the pairing list on your device. Connect again. 4. Reset the headphones by plugging and unplugging the audio cable or try to restart your phone.
Bluetooth delay	Clear the Bluetooth cache or reset the Bluetooth, restart, and then double press the ANC button to switch to Low latency mode.
Headphones don't charge	Ensure both ends of the USB charging cable are correctly connected. Try a different USB cable and connect to a wall charger. If exposed to extreme temperatures, let the headphones return to room temperature and then retry charging.
Can't turn off ANC	To turn ANC on/off separately, use the ANC button. Long press ANC to turn off the green light, then long press the multi-function button (more than 3 seconds) to turn off the blue light (Bluetooth). Recommend turning off ANC when not in use to avoid unnecessary power consumption.
Headphones' volume is very low	After successful pairing, tap the icon next to your device name in the Bluetooth menu and ensure "Sync volume with phone" is on. iOS synchronizes volume automatically; Android requires manual activation.
Poor audio quality on Windows	There are "Headset" and "Headphone" modes. Toggle between them by changing your output device. Selecting "Headphone Mode" will drastically improve audio quality. "Headset Mode" is for highly compressed VOIP calls and is a limitation of that protocol.
No Sound	1. If exposed to extreme temperatures, let the headphones return to room temperature. 2. Long press the Multi-function button to hear the connected device. 3. Ensure you are using the correct device. Press play on your mobile device. 4. Please use another music source. 5. If two mobile devices are connected, pause your other device first. Restart your mobile device. Reset the headphones.
Headphones don't connect to TV	Check if your TV is Bluetooth enabled. You may need an external Bluetooth adapter for non-Bluetooth TVs. Adapter usage: 1. Use an adapter with Transmitter/TX/Launch mode (some only have Receiver/RX mode). Transmitter adapters include an AUX port and audio cable. 2. Pairing steps (use audio cable, not adapter alone): Plug the adapter into a USB port for power. Insert the 3.5mm audio cable into the adapter's audio port. Insert the other end of the audio cable into your TV's audio output.
Battery	Fully charged headphones can be stored for several months until completely discharged. To maintain battery life, avoid prolonged charging after full charge or prolonged deep discharge.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ISEDC warning

This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développementéconomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device complies with RF exposure guidelines. Users can obtain Canadian information on RF exposure and compliance.

Le présent appareil est conforme. Après examen de ce matériel aux conformité ou aux limites d'intensité de champ RF, les utilisateurs peuvent sur l'exposition aux radiofréquences et la conformité d'acquérir les informations correspondantes.

FCC ID: 2BD8E-NC95
IC: 32137-NC95

The essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements are met. The complete declaration of conformity can be found at: www.t-fun.fun

[CE logo] [FC logo] [RoHS logo] [CE logo] [Recycling symbol] [Recycling symbol]