Smart Watch User Manual
Getting Started
Charging and Activation
Charge the device to activate it before first use. Connect the charging cable to the adapter or a USB port on your computer.
Image: Diagram showing the smart watch being connected to a charging cable and a power source.
Device Buttons
- Digital Crown: Rotate to enlarge/reduce images, maps, and photos. On information pages, it can be used to turn pages. When setting a parameter, it helps accurately locate the desired setting.
- Home Button: Press to see the watch face or home screen. Press to show or hide friends. Press and hold to turn off or on.
Downloading the App and Pairing
Scan the QR code [QR code] to download and install the companion application.
Image: QR code for downloading the companion application.
Pairing Process:
- Open the App and set up your profile.
- Go to the "Device" section and click "Add a device".
- Choose your device from the scanning list.
- Finish the pairing process.
The MAC address found on the "Setting" > "About" page can help identify your device on the scanning list.
Image: Flowchart illustrating the pairing process: Scan QR code -> Download App -> Set up profile -> Go to Device -> Add Device -> Choose device -> Finish.
Using the Touch Screen
Control Center: Swipe up ⬆️ to access the control center.
Feature Pages: Swipe down ⬇️ to access feature pages.
Navigation: Swipe left ⬅️ or right ➡️ to navigate between different screens.
Image: Diagrams illustrating swipe gestures: swipe up for control center, swipe down for feature pages, swipe left/right for different screens.
Smart Watch Features
Heart Rate Test
The Smart Watch can record your heart rate throughout the day. You can also tap the page to start measuring your heart rate manually.
Image: Heart Rate icon ❤️.
Sports Tracking
The Smart Watch automatically tracks steps taken. Your movement stats reset to zero at midnight.
Image: Sports icon ?.
Sleep Tracking
If you wear the Smart Watch during sleep, it can provide statistics on hours slept and sleep quality on both the screen and the companion App. Sleep stats reset to zero at 8:00 PM.
Image: Sleep icon ?.
Remote Shutter
After connecting the device, you can remotely control your phone's camera.
Image: Camera icon ?.
Training Modes
Tap the training icon ?️ on the menu to start a new training session recording. There are 8 sport modes to choose from. The last training recording will be shown on the training page.
Image: Training icon ?️.
Music Player Control
After connecting the device, you can remotely control your phone's music player.
Image: Music player icon ▶️.
Weather
The device displays current and next-day weather information on the weather page. Weather data is synced after connecting with the App and will not update if disconnected for an extended period.
Image: Weather icon ☀️.
Messages Reminder
The device syncs incoming notifications from platforms like Twitter, Facebook, Whatsapp, and Instagram. It can store the most recent 5 messages. You can enable or disable incoming notifications in the App.
Image: Message notification icon ?.
Silent Alarms
Set alarms in the App, and the device will vibrate to remind you at the scheduled time.
Image: Alarm icon ⏰.
Theater Mode
When Theater Mode is activated, the device will turn off vibration and reduce screen brightness. This mode can be toggled on/off from the control center.
Image: Theater mode icon ?.
Other Features
Additional features include stopwatch, alarm, timer, brightness adjustment, mute toggle, theater mode, factory reset, power off, and an 'About' section.
Remind to Move
The device vibrates to remind you to relax after one hour of sitting. This feature can be enabled or disabled in the App.
Image: Walking person icon ?.
Stopwatch
Tap the start button on the stopwatch page to begin timing, and tap the stop button to end.
Image: Stopwatch icon ⏱️.
Remind to Drink
The smart watch will prompt "Time to Drink Some Water" at your planned drinking intervals. This feature can be configured in the App.
Image: Water drop icon ?.
General Information & Specifications
Environmental Conditions
- Operating temperature: -10°C to 50°C (14°F to 122°F)
- Non-operating temperature: -20°C to 60°C (-4°F to 140°F)
Size
Fits a wrist circumference between 5.5 and 7.7 inches.
Disposal and Recycling
It is the consumer's responsibility to properly dispose of and recycle the Smart Bracelet and its components. Do not dispose of the Smart Bracelet with common household waste. The unit is considered electronic waste and should be taken to your local electronic equipment collection facility. For more information, contact your local electronic waste management authority or the retailer where the product was purchased.
Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Image: Certificate of Conformity (合格证) indicating the product has passed quality checks.
Image: RoHS and CE compliance marks.
