ABB Video Indoor Station 4.3 Handset

Overview

The ABB Video Indoor Station 4.3 Handset is a component of the ABB-Welcome video entry system. This document provides detailed information on its control elements, terminal descriptions, and technical specifications. Instructions are available in multiple languages including English, Spanish, Italian, French, Finnish, and Czech.

Control Elements

The indoor station features several control elements for operation:

• 1. 4.3" Color Display

  The primary visual interface for viewing calls and surveillance feeds.

• 2. Unlock Button 2

  In standby mode, press to release the second lock of the default outdoor station. During a call or communication, press to release the second lock of the calling outdoor station. During surveillance, press to release the second lock of the station under surveillance.

• 3. Unlock Button

  In standby mode, press to release the default lock of the default outdoor station. A long press (3 seconds) enables/disables the "Auto unlock" function on the primary indoor station. During a call or communication, press to release the default lock of the calling outdoor station. During surveillance, press to release the default lock of the station under surveillance.

• 4. Surveillance Button

  In standby mode, press to monitor the default outdoor station. If the "One on" mode is used on the system controller during a call request, this button must be pressed on secondary indoor stations to display the image. During communication, a long press takes a snapshot. During surveillance, press to switch to the next video stream or terminate surveillance.

• 5. Mute Button

  In standby mode, press to activate/mute the ringtone. A long press in standby mutes the ringtone for all indoor stations in the same apartment. During a call request, press to activate/mute the ringtone; the call will terminate after 5 seconds. During communication, press to activate/mute the microphone.

• 6. Program Button

  In standby mode, press to release the second lock of the default outdoor station. If multiple functions are assigned to the program button, pressing it accesses the "Program button" screen.

• 7. Setting Button

  In standby mode, press to enter system settings. During a call request, communication, or surveillance, press to adjust volume, color, contrast, and brightness.

• 8. *Induction Loop Function

  This function applies only to model M22473-W and is designed for hearing-impaired persons. It allows users with hearing aids to hear audio from the outdoor or indoor station.

• 9. Handset

  Pick up the handset within 30 seconds during a call request to accept the call. Hang up the handset during communication to terminate the call.

Terminal Description

The indoor station features various terminals for connection and configuration:

• Default Outdoor Station Address

  Adjust the jumper connector to set the address of the default outdoor station (1-9).

• Indoor Station Selector Switch

  Selector switch X10 sets the tens digits, selector switch X1 sets the units digits, and Dip switches X100 and X200 set the hundreds digits for station addressing.

• Primary/Secondary Indoor Station

  Only one indoor station per apartment can be set as "Primary" (ON=Primary).

• Terminal Resistor Switch

  In video installations or mixed audio/video installations, this switch must be set to 'RC on' on the last device of the line (ON=RC on).

• a1, b1 Bus Connector

  This is a potential-free contact, such as a doorbell pushbutton.

Technical Data

Service and Support

For service and country-specific contact information, please visit:

http://new.abb.com/contact-centers

FCC compliance information is available with the product package.