SKY ROVER KING
User Manual
Parts List and Accessories
- SKY ROVER KING Drone x 1
- Remote Control x 1
- Propeller Set x 1 (4 pcs)
- Battery x 1
- USB Charging Cable x 1
- Screwdriver x 1
- User Manual x 1
Assembly Instructions
Step 1: Prepare Drone Body
Unpack the drone body and rotor arms. Ensure all components are present.
Diagram A Description: Depicts various cables and connectors, likely for power and control.
Diagram B Description: Shows the main drone chassis and four foldable arms where rotors will be attached.
Step 2: Attach Motors and Propellers
Mount the motors onto the designated points on the rotor arms. Attach the propellers to the motors, ensuring correct rotation direction (usually indicated by markings).
Diagram C Description: Illustrates screwing a motor onto a rotor arm and then fitting a propeller onto the motor shaft.
Step 3: Install Landing Gear
Secure the landing gear components to the underside of the drone body.
Diagram D Description: Shows the process of attaching the landing gear struts to the drone's base.
Step 4: Connect Battery
Insert the battery into its compartment and connect the power cable.
Diagram E Description: Depicts the drone's battery pack and its connector being plugged into the drone.
Step 5: Prepare Remote Control
Insert batteries (not included) into the remote control and extend the antenna.
Diagram F Description: Shows the remote control unit with its joysticks, buttons, power switch, and antenna.
Step 6: Final Assembly Check
Ensure all propellers are securely attached and the landing gear is stable.
Diagram G Description: Displays the drone with all four propellers correctly mounted and ready for flight.
Diagram H Description: Shows the fully assembled drone, including the landing gear.
Step 7: Power On
Turn on the drone and then the remote control.
Diagram I Description: Illustrates the drone in a ready-to-fly state, potentially with rotors slightly spinning or indicating power.
Step 8: Charging
Connect the drone to the USB charging cable and a power source.
Diagram J Description: Shows the drone connected to a USB cable for charging.
Operation
Flight Control: Use the joysticks on the remote control to ascend, descend, move forward/backward, and turn. Refer to the remote control diagram (Diagram F) for specific button functions.
Hovering: The drone should maintain a stable hover when controls are neutral.
Return-to-Home: If equipped, a dedicated button may initiate an automatic return to the takeoff point.
Safety Precautions
⚠️ Warning: Always fly in open areas, away from people, buildings, and obstacles.
Do not fly near airports or in restricted airspace.
Ensure the battery is fully charged before flight.
Keep propellers away from hands and face during operation.
Operate in suitable weather conditions; avoid rain or strong winds.
This product is not a toy and requires adult supervision for users under 14 years of age.
Dispose of batteries responsibly.
